Planet GSD-802S User's Manual

Download or browse on-line these Operation & User’s Manual for Planet GSD-802S Network Router, Switch.

Planet GSD-802S Manual Information:

This manual for Planet GSD-802S, given in the PDF format, is available for free online viewing and download without logging on. The guide contains 89 pages, and the size of the file at download is . The document type is Operation & User’s Manual.

Download Manual

More Manuals:

In case you failed to obtain relevant information in this document, please, look through related operating manuals and user instructions for Planet GSD-802S. Just click one of the links below to go to the selected manual:

Summary of Contents:

[Page 1] Planet GSD-802S

User's Manual GSD-802S 8-Port Gigabit Web Smart Ethernet Switch GSD-802PS 8-Port Gigabit Web Smart PoE Switch ...

[Page 2] Planet GSD-802S

User’s Manual of GSD-802S / GSD-802PS Trademarks Copyright © PLANET Technology Corp. 2011. Contents subject to which revision without prior notice. PLANET is a registered trademark of PLANET Technology Corp. All other trademarks belong to ...

[Page 3] Planet GSD-802S

User’s Manual of GSD-802S / GSD-802PS TABLE OF CONTENTS 1. INTRODUCTION.............................................................................................................................................................1 1.1 PACKAG...

[Page 4] Planet GSD-802S

User’s Manual of GSD-802S / GSD-802PS 4.9.1 IGMP Snooping Configuration............................................................................................................................. 2 4.10 QUALITY OF SERVICE .......................

[Page 5] Planet GSD-802S

User’s Manual of GSD-802S / GSD-802PS 7. TROUBLESHOOTING....................................................................................................................................................5 APPENDIX A..............................

[Page 6] Planet GSD-802S

User’s Manual of GSD-802S / GSD-802PS 1. INTRODUCTION 1.1 Package Contents Check the contents of your package for following parts: ● Web Smart Gigabit Ethernet Switch x1 ● User's Manual CD x1 ● Quick Installation Guide x1 �...

[Page 7] Planet GSD-802S

User’s Manual of GSD-802S / GSD-802PS 1.3 Product Features  Physical Port GSD-802S z 8-Port 10/100/1000Base-T RJ-45 Copper with 2 Shared SFP / mini-GBIC slots GSD-802PS z 8-Port 10/100/1000Base-T RJ-45 Copper with 2 Shared SFP / mini...

[Page 8] Planet GSD-802S

User’s Manual of GSD-802S / GSD-802PS  Management z Remote Web management interface z Firmware upgrade through web interface z Cable Diagnostics technology z Support SNMPv1 with RFC-1213/1573-Interface group, Ethernet MIB z SNMP Tr...

[Page 9] Planet GSD-802S

User’s Manual of GSD-802S / GSD-802PS Network Standards IEEE 802.3 IEEE 802.3u IEEE 802.3ab IEEE 802.3z IEEE 802.1Q IEEE 802.1w IEEE 802.1X IEEE 802.3ad IEEE 802.3x IEEE 802.3af Ethernet Fast Ethernet Gigabit Ethernet, 1000Base-T ...

[Page 10] Planet GSD-802S

User’s Manual of GSD-802S / GSD-802PS 2. INSTALLATION This section describes the functionalities of Gigabit Ethernet Switch’s components and guides how to install it on the desktop or shelf. Basic knowledge of networking is assumed. Please ...

[Page 11] Planet GSD-802S

User’s Manual of GSD-802S / GSD-802PS 2.1.2 Switch Front Panel Figure 2-1 & Figure 2-2 shows a front panel of GSD-802S and GSD-802PS. Figure 2-1 PLANET GSD-802S Front Panel Figure 2-2 PLANET GSD-802PS Front Panel 2.1.3 LED Indicato...

[Page 12] Planet GSD-802S

User’s Manual of GSD-802S / GSD-802PS Figure 2-4 PLANET GSD-802PS LED panel 2.1.4 Switch Rear Panel The rear panel of the Gigabit Ethernet Switch indicates an AC inlet power socket, which accepts input power from 100 to 240VAC, 50-60Hz. ...

[Page 13] Planet GSD-802S

User’s Manual of GSD-802S / GSD-802PS 2.2 Install the Switch This section describes how to install your Gigabit Ethernet Switch and make connections to the Switch. Please read the following topics and perform the procedures in the order being...

[Page 14] Planet GSD-802S

User’s Manual of GSD-802S / GSD-802PS 2.2.2 Rack Mounting To install the Gigabit Ethernet Switch in a 19-inch standard rack, please follows the instructions described below. Step1: Place the Gigabit Ethernet Switch on a hard flat surface, wit...

[Page 15] Planet GSD-802S

User’s Manual of GSD-802S / GSD-802PS 2.2.3 Installing the SFP transceiver The sections describe how to insert an SFP transceiver into an SFP slot. The SFP transceivers are hot-pluggable and hot-swappable. You can plug-in and out the transcei...

[Page 16] Planet GSD-802S

User’s Manual of GSD-802S / GSD-802PS 4. Check the Link mode of the SFP port if the link failed. Co works with some fiber-NICs or Media Converters, set the Link mode to “1000 Force” is needed. Remove the transceiver module 1. Make sur...

[Page 17] Planet GSD-802S

User’s Manual of GSD-802S / GSD-802PS 3. SWITCH MANAGEMENT This chapter describes how to manage the Gigabit Ethernet Switch. Topics include: - Overview - Management methods - Assigning an IP address to the Gigabit Ethernet Switch - Log...

[Page 18] Planet GSD-802S

User’s Manual of GSD-802S / GSD-802PS 3.2 Management Methods The way to manage the Gigabit Ethernet Switch: - Web Management via a network or dial-up connection. 3.2.1 Web Management The PLANET Gigabit Ethernet Switch provides a built-in br...

[Page 19] Planet GSD-802S

User’s Manual of GSD-802S / GSD-802PS Figure 3-1 Web Login Screen of Gigabit Ethernet Switch 1. For security reason, please change and memorize the new password after this first setup. 2. Only accept command in lowercase l...

[Page 20] Planet GSD-802S

User’s Manual of GSD-802S / GSD-802PS 4. CONFIGURATION The Gigabit Ethernet Switch provide Web interface for Switch smart function configuration and make the Switch operate more effectively - They can be configured through the Web Browser. A...

[Page 21] Planet GSD-802S

User’s Manual of GSD-802S / GSD-802PS Main Menu Using the onboard web agent, you can define system parameters, manage and control the Web Smart Switch, and all its ports, or monitor network conditions. Via the Web-Management, the administrat...

[Page 22] Planet GSD-802S

User’s Manual of GSD-802S / GSD-802PS 4.2 System 4.2.1 System Info The System Info page provides information for the current device information. System Info page helps a switch administrator to identify the firmware / hardware version and IP...

[Page 23] Planet GSD-802S

User’s Manual of GSD-802S / GSD-802PS 4.2.2 Misc Configuration The Misc Configuration includes the System name, Location name, Login Timeout, IP Address, Subnet Mask and Gateway. Through the Web Smart Switch Utility, you can easily recognize ...

[Page 24] Planet GSD-802S

User’s Manual of GSD-802S / GSD-802PS of the switch. System Name Defines the user-defined device name. System Description Defines the user-defined device description. Password This function provides administrator to secure Web login. ...

[Page 25] Planet GSD-802S

User’s Manual of GSD-802S / GSD-802PS 4.3 Port Configuration This function allows displaying each port’s status. The Link Status in the screen displays the current connection speed and duplex mode; else this function will show down when th...

[Page 26] Planet GSD-802S

User’s Manual of GSD-802S / GSD-802PS • 1000 full - Force sets 10000Mbps/Full-Duplex mode. • Disable - Shutdown the port manually. • Flow Control Allow Enable or Disable flow control for selected port. • Enable – 802.3...

[Page 27] Planet GSD-802S

User’s Manual of GSD-802S / GSD-802PS 4.4 Port Mirroring This function provide to monitoring network traffic that forwards a copy of each incoming or outgoing packet from one port of a network Switch to another port where the packet can be st...

[Page 28] Planet GSD-802S

User’s Manual of GSD-802S / GSD-802PS 4.5 Storm Control Storm control for the Gigabit Ethernet Switch is configured on this page. There three types of storm rate control:  Unicast storm rate control  Multicast storm rate control ...

[Page 29] Planet GSD-802S

User’s Manual of GSD-802S / GSD-802PS 4.6 VLANs A Virtual LAN (VLAN) is a logical network grouping that limits the broadcast domain. It allows you to isolate network traffic so only members of the VLAN receive traffic from the same VLAN membe...

[Page 30] Planet GSD-802S

User’s Manual of GSD-802S / GSD-802PS 4.6.1 VLAN Membership This function group individual ports into a small “Virtual” network of their own to be independent of the other ports. The screen in Figure 4-6-1 appears. Figure 4-6-1 Port Se...

[Page 31] Planet GSD-802S

User’s Manual of GSD-802S / GSD-802PS As show in Figure 4-6-2 & Figure 4-6-3 Figure 4-6-2 Add a VLAN Screen Figure 4-6-3 VLAN Member Setup Screen 4.6.1.2 Modify the VLAN Group Member Once you want to modify the existence VLAN Gro...

[Page 32] Planet GSD-802S

User’s Manual of GSD-802S / GSD-802PS As show in Figure 4-6-4 appears. Figure 4-6-4 VLAN Group – Member Modify And Delete VLAN Group Screen Once the VLAN Group be deleted, the Ports with the PVID set to this VLAN Group have to r...

[Page 33] Planet GSD-802S

User’s Manual of GSD-802S / GSD-802PS The page includes the following fields: Object Description • VLAN Type There’re two VLAN mode support – 802.1Q VLAN and Port-based VLAN • 802.1Q – Packets income will be tagged with VID as ...

[Page 34] Planet GSD-802S

User’s Manual of GSD-802S / GSD-802PS 4.6.3 VLAN setting example: 4.6.3.1 Two separate 802.1Q VLAN The diagram shows how the switch handle Tagged and Untagged traffic flow for two VLANs. VLAN Group 2 and VLAN Group 3 are separated VLAN. Eac...

[Page 35] Planet GSD-802S

User’s Manual of GSD-802S / GSD-802PS  Untagged packet entering VLAN 3 1. While [PC-4] transmit an untagged packet enters Port-4, the switch will tag it with a VLAN Tag=3. [PC-5] and [PC-6] will received the packet through Port-5 and Port...

[Page 36] Planet GSD-802S

User’s Manual of GSD-802S / GSD-802PS Figure 4-6-8 Assign VLAN Members For VLAN 2 and VLAN 3 Remember to remove the Port 1 – Port 6 from VLAN 1 membership, since the Port 1 – Port 6 had been assigned to VLAN 2 and VLAN 3. Figur...

[Page 37] Planet GSD-802S

User’s Manual of GSD-802S / GSD-802PS It’s import to remove the VLAN members from VLAN 1 configuration. Or the ports would become overlap setting. ( About the overlapped VLAN configuration, see next VLAN configure sample) 3. Assign PVI...

[Page 38] Planet GSD-802S

User’s Manual of GSD-802S / GSD-802PS 4.6.3.2 Two VLANs with overlap area Follow the example of 4.6.3.1. There’re two exist separate VLANs – VLAN 2 and VLAN 3, and the PCs of each VLANs are not able to access each other of different VLAN...

[Page 39] Planet GSD-802S

User’s Manual of GSD-802S / GSD-802PS 3. Define a VLAN 1 as a “Public Area” that overlapping with both VLAN 2 members and VLAN 3 members. Figure 4-6-13 VLAN 1 – The Public Area Member Assign 4. Setup Port-7 with “PVID=1” at VLAN p...

[Page 40] Planet GSD-802S

User’s Manual of GSD-802S / GSD-802PS That is, although the VLAN 2 members: Port-1 to Port-3 and VLAN 3 members: Port-4 to Port-6 also belong to VLAN 1. But with different PVID settings, packets form VLAN 2 or VLAN 3 is not able to access to t...

[Page 41] Planet GSD-802S

User’s Manual of GSD-802S / GSD-802PS 2. Assign the VLAN Trunk Port to be the member of each VLAN – which wants to be aggregated. At this sample, add Port-8 to be VLAN 2 and VLAN 3 member port. Figure 4-6-17 Add VLAN Trunk Port To Each V...

[Page 42] Planet GSD-802S

User’s Manual of GSD-802S / GSD-802PS 4.7 Rapid Spanning Tree Spanning Tree Protocol (STP) provides tree topography for any arrangement of bridges. STP also provides one path between end stations on a network, eliminating loops. Rapid Spanni...

[Page 43] Planet GSD-802S

User’s Manual of GSD-802S / GSD-802PS Figure 4-7-1 Rappid Spanning Tree System/Port Configuration 4.7.1 RSTP System Configuration The “RSTP System Configuration” table allows configuring the spanning tree parameters. Figure 4-7-2 R...

[Page 44] Planet GSD-802S

User’s Manual of GSD-802S / GSD-802PS The page includes the following fields: Object Description • System Priority Specifies the bridge priority value. When switches or bridges are running STP, each is assigned a priority. After exchang...

[Page 45] Planet GSD-802S

User’s Manual of GSD-802S / GSD-802PS 4.7.2 RSTP Port Configuration The RSTP Port Configuration page contains fields for assigning RSTP properties to individual ports. The screen in Figure 4-7-3 appears. Figure 4-7-3 RSTP Port Configuratio...

[Page 46] Planet GSD-802S

User’s Manual of GSD-802S / GSD-802PS 4.8 Link Aggregation Port Aggregation optimizes port usage by linking a group of ports together to form a single Link Aggregated Groups (LAGs). Port Aggregation multiplies the bandwidth between the device...

[Page 47] Planet GSD-802S

User’s Manual of GSD-802S / GSD-802PS The page includes the following fields: Object Description • Port Indicate port 1 to port 8. • Normal While a port is checked as “Normal”, the port is not joining to any Static Trunk Group. ...

[Page 48] Planet GSD-802S

User’s Manual of GSD-802S / GSD-802PS The page includes the following fields: Object Description • Port Indicate port 1 to port 8. • Protocol Enable To Enable or disable the LCAP protocol on a selected port. Once the LACP protocol b...

[Page 49] Planet GSD-802S

User’s Manual of GSD-802S / GSD-802PS 4.9 IGMP Snooping The Internet Group Management Protocol (IGMP) lets host and routers share information about multicast groups memberships. IGMP snooping is a switch feature that monitors the exchange of...

[Page 50] Planet GSD-802S

User’s Manual of GSD-802S / GSD-802PS elected as the ‘queried’. This router then keeps track of the membership of the multicast groups that have active members. The information received from IGMP is then used to determine if multicast pac...

[Page 51] Planet GSD-802S

User’s Manual of GSD-802S / GSD-802PS 4.10 Quality of Service Quality of Service (QoS) is an advanced traffic prioritization feature that allows you to establish control over network traffic. QoS enables you to assign various grades of networ...

[Page 52] Planet GSD-802S

User’s Manual of GSD-802S / GSD-802PS 4.10.1 802.1p QoS Mode QoS settings allow customization of packet priority in order to facilitate delivery of data traffic that might be affected by latency problems. The IEEE 802.1p Priority specificatio...

[Page 53] Planet GSD-802S

User’s Manual of GSD-802S / GSD-802PS 4.10.2 DSCP QoS Mode DiffServ Code Point (DSCP) - is the traffic prioritization bits within an IP header that are encoded by certain applications and/or devices to indicate the level of service required...

[Page 54] Planet GSD-802S

User’s Manual of GSD-802S / GSD-802PS • Low = Queue 0 • Normal = Queue 1 • Medium = Queue 2 • High = Queue 3 ...

[Page 55] Planet GSD-802S

User’s Manual of GSD-802S / GSD-802PS 4.11 802.1X Management The PLANET Gigabit Ethernet Switch supports IEEE 802.1X Port-base network access control and RADIUS server authentication to enhance the host link more security. An 802.1X Infrastru...

[Page 56] Planet GSD-802S

User’s Manual of GSD-802S / GSD-802PS 8. The client and RADIUS server derive encryption keys. 9. The RADIUS server sends Web-Smart Switch a RADIUS ACCEPT message. 10. Web-Smart Switch sends the client an EAP Success message along with th...

[Page 57] Planet GSD-802S

User’s Manual of GSD-802S / GSD-802PS • RADIUS Server IP The IP address of the RADIUS server being added. • RADIUS UDP Port The UDP port used by this server. The valid range is 0 - 65535. The default UDP Port No. is 1812 • RADIUS Sec...

[Page 58] Planet GSD-802S

User’s Manual of GSD-802S / GSD-802PS Figure 4-11-2 RADIUS Server Configuration 4.11.2 802.1X Parameters At the bottom of this page, click “Parameter” button will redirect to the “802.1X parameter” configure page. The screen in Fig...

[Page 59] Planet GSD-802S

User’s Manual of GSD-802S / GSD-802PS • EAP Timeout [1-255 seconds] This input field allows the user to enter the EAP timeout for the selected port. The EAP timeout is the value, in seconds, of the timer used by the authenticator state ma...

[Page 60] Planet GSD-802S

User’s Manual of GSD-802S / GSD-802PS 4.12.2 PoE (Power over Ethernet) Configuration This section allows the user to inspect and configure the current PoE port settings; screen in Figure 4-12-1 appears. Figure 4-12-1 PoE (Power over Ethern...

[Page 61] Planet GSD-802S

User’s Manual of GSD-802S / GSD-802PS 4.13 MAC Addresses 4.13.1 Dynamic Address Table Use this page to set the Address Ageing Timeout for the MAC Address database, and to display information about entries in the MAC Address database. These e...

[Page 62] Planet GSD-802S

User’s Manual of GSD-802S / GSD-802PS will be forward to the specify port. Specifies the MAC address for which the table is queried. • MAC-Address 4.13.2 Static MAC Address The Static MAC Address page contains a list of static MAC addr...

[Page 63] Planet GSD-802S

User’s Manual of GSD-802S / GSD-802PS 4.14 Tools 4.14.1 Factory Reset The Factory Reset button can reset the Gigabit Ethernet Switch back to the factory default mode. Be aware that the entire configuration will be reset; expect the IP addres...

[Page 64] Planet GSD-802S

User’s Manual of GSD-802S / GSD-802PS Figure 4-14-2 Firmware Upgrade Screen 5. Once the software be loaded to the system successfully. The following screen appears. Click the “Yes” button to activate the new software immediately. The ...

[Page 65] Planet GSD-802S

User’s Manual of GSD-802S / GSD-802PS 4.14.3 Configuration Upload This function allows backup and reload the current configuration of Switch to the local management station. The screen in Figure 4-14-4 appears.  Configuration Upload: Upl...

[Page 66] Planet GSD-802S

User’s Manual of GSD-802S / GSD-802PS  Configuration Download 1. Press the “Download” button to save the current configuration in manager workstation. The following screens in Figure 4-14-6 & Figure 4-14-7 appear Figure 4-14-6...

[Page 67] Planet GSD-802S

User’s Manual of GSD-802S / GSD-802PS 4.14.4 Ping Use this screen to tell the Gigabit Ethernet Switch to send a Ping request to a specified IP address. You can use this to check whether the Gigabit Ethernet Switch can communicate with a parti...

[Page 68] Planet GSD-802S

User’s Manual of GSD-802S / GSD-802PS 4.14.5 Cable Diagnostics The Cable Diagnostics page contains fields for performing tests on copper cables. These functions have the ability to identify the cable length and operating conditions, and to is...

[Page 69] Planet GSD-802S

User’s Manual of GSD-802S / GSD-802PS The Cable status includes the following items: Object Description • Pair The twist pair of the UTP cable. The pair groups as follow: A (Pin 1,2) B (Pin 3,6) C (Pin 4,5) D (Pin 7,8) • Length[m...

[Page 70] Planet GSD-802S

User’s Manual of GSD-802S / GSD-802PS 4.15 Status Click on the “Status” to present the Switch status on this screen, it displays the following status:  Port Statistics  LACP Status  RSTP Status  IGMP Snooping Status �...

[Page 71] Planet GSD-802S

User’s Manual of GSD-802S / GSD-802PS 4.15.2 LACP Status The LACP Status page display the current LACP aggregation Groups and LACP Port status. The “LACP Aggregation Overview” and “LACP Port Status” screen is displayed as in Figure 4-...

[Page 72] Planet GSD-802S

User’s Manual of GSD-802S / GSD-802PS The Color and ID legend Down Port link down. 0 Blocked Port Blocked by RSTP. Number is Partner port number if other switch has LACP enabled. 0 Learning Port Learning by RSTP. Forwarding Port...

[Page 73] Planet GSD-802S

User’s Manual of GSD-802S / GSD-802PS 4.15.3 RSTP Status The RSTP Status page display the current STP bridge , roor bridge and per port stp status. The “RSTP VLAN Bridge Overview” and “RSTP Port Status” screen is displayed as in Figu...

[Page 74] Planet GSD-802S

User’s Manual of GSD-802S / GSD-802PS  RSTP VLAN Bridge Overview The information of the RSTP Root shows in the Bridge overview table. The page includes the following fields: Object Description • VLAN Id Identifies VLANs associated ...

[Page 75] Planet GSD-802S

User’s Manual of GSD-802S / GSD-802PS traffic nor can it learn MAC addresses. • Learning -- The port is currently in the learning mode. The port cannot forward traffic however it can learn new MAC addresses. • Forwarding -- The port is c...

[Page 76] Planet GSD-802S

User’s Manual of GSD-802S / GSD-802PS • V1 Reports Statistics of IGMP V1 report packets received at the VLAN. (Packets with content type = 0x12 ; The Membership Report (version 1)) • V2 Reports Statistics of IGMP V2 report packets recei...

[Page 77] Planet GSD-802S

User’s Manual of GSD-802S / GSD-802PS 4.15.6 Logout Press this function; the web interface will go back to login screen. The screen in Figure 4-15-6 & Figure 4-15-7 appears. Figure 4-15-6 Logout Screen Figure 4-15-7 Login Screen ...

[Page 78] Planet GSD-802S

User’s Manual of GSD-802S / GSD-802PS 5. SWITCH OPERATION 5.1 Address Table The Switch is implemented with an address table. This address table composed of many entries. Each entry is used to store the address information of some node in n...

[Page 79] Planet GSD-802S

User’s Manual of GSD-802S / GSD-802PS 5.5 Auto-Negotiation The STP ports on the Switch have built-in “Auto-negotiation”. This technology automatically sets the best possible bandwidth when a connection is established with another network ...

[Page 80] Planet GSD-802S

User’s Manual of GSD-802S / GSD-802PS A host will never send a report when it wants to leave a group (for version 1). A host will send a “leave” report when it wants to leave a group (for version 2). Multicast routers send IGMP queries (t...

[Page 81] Planet GSD-802S

User’s Manual of GSD-802S / GSD-802PS 6. POWER OVER ETHERNET OVERVIEW What is PoE? Based on the global standard IEEE 802.3af, PoE is a technology for wired Ethernet, the most widely installed local area network technology adopted today. PoE ...

[Page 82] Planet GSD-802S

User’s Manual of GSD-802S / GSD-802PS The data pairs are used. Since Ethernet pairs are transformer coupled at each end, it is possible to apply DC power to the center tap of the isolation transformer without upsetting the data transfer. In th...

[Page 83] Planet GSD-802S

User’s Manual of GSD-802S / GSD-802PS The PoE Provision Process While adding PoE support to networked devices is relatively painless, it should be realized that power cannot simply be transferred over existing CAT-5 cables. Without proper pre...

[Page 84] Planet GSD-802S

User’s Manual of GSD-802S / GSD-802PS Start-up Once line detection and optional classification stages are completed, the PSE must switch from low voltage to its full voltage capacity (44-57 Volts) over a minimal amount of time (above 15 micro...

[Page 85] Planet GSD-802S

User’s Manual of GSD-802S / GSD-802PS 7. TROUBLESHOOTING This chapter contains information to help you solve problems. If the Switch is not functioning properly, make sure the Ethernet Switch was set up according to instructions in this manua...

[Page 86] Planet GSD-802S

User’s Manual of GSD-802S / GSD-802PS APPENDIX A A.1 Switch‘s RJ-45 Pin Assignments 1000Mbps, 1000Base T Contact MDI MDI-X 1 BI_DA+ BI_DB+ 2 BI_DA- BI_DB- 3 BI_DB+ BI_DA+ 4 BI_DC+ BI_DD+ 5 BI_DC- BI_DD- 6 BI_DB- BI_DA- 7 BI_DD+ B...

[Page 87] Planet GSD-802S

User’s Manual of GSD-802S / GSD-802PS A.3 RJ-45 cable pin assignment 213 6 1 2 3 6 2 1 3 6 There are 8 wires on a standard UTP/STP cable and each wire is color-coded. The following shows the pin allocation and color of straight c...

[Page 88] Planet GSD-802S

EC Declaration of Conformity For the following equipment: *Type of Product: 8-Port 10/100/1000Mbps with 2 shared SFP Web Smart Gigabit Switch *Model Number: GSD-802S * Produced by: Manufacturer‘s Name : Planet Technology Cor...

[Page 89] Planet GSD-802S

EC Declaration of Conformity For the following equipment: *Type of Product: 8-Port 10/100/1000Mbps with 2 shared SFP Web Smart PoE Switch *Model Number: GSD-802PS * Produced by: Manufacturer‘s Name : Planet Technology Corp. ...