Supero 7047GR-TRF User's Manual

Download or browse on-line these Operation & User’s Manual for Supero 7047GR-TRF Desktop.

Supero 7047GR-TRF Manual Information:

This manual for Supero 7047GR-TRF, given in the PDF format, is available for free online viewing and download without logging on. The guide contains 128 pages, and the size of the file at download is . The document type is Operation & User’s Manual.

Download Manual

Summary of Contents:

[Page 1] Supero 7047GR-TRF

SuperWorkstation 7047GR-TRF SUPER ® USER’S MANUAL Revision 1.0a ...

[Page 2] Supero 7047GR-TRF

The information in this User’s Manual has been carefully reviewed and is believed to be accurate. The vendor assumes no responsibility for any inaccuracies that may be contained in this document, makes no commitment to update or to keep current t...

[Page 3] Supero 7047GR-TRF

Preface About This Manual This manual is written for professional system integrators and PC technicians. It provides information for the installation and use of the SuperWorkstation 7047GR- TRF. Installation and maintenance should be performed by ex...

[Page 4] Supero 7047GR-TRF

iv this chapter when adding or removing processors or main memory and when reconfi guring the serverboard. Chapter 6: Advanced Chassis Setup Refer to Chapter 6 for detailed information on the SC747TQ-R1620B 4U/Tower rackmount chassis. You should f...

[Page 5] Supero 7047GR-TRF

v Preface Notes ...

[Page 6] Supero 7047GR-TRF

vi Table of Contents Chapter 1 Introduction 1-1 Overview ......................................................................................................... 1-1 1-2 Serverboard Features .............................................................

[Page 7] Supero 7047GR-TRF

vii Table of Contents Installing the Chassis Cover ........................................................................... 2-9 Installing Feet on the Chassis ...................................................................... 2-10 Chapter 3 Sy...

[Page 8] Supero 7047GR-TRF

viii 5-8 Connector Defi nitions ................................................................................... 5-15 5-9 Jumper Settings ............................................................................................ 5-22 5-10 On...

[Page 9] Supero 7047GR-TRF

Chapter 1 Introduction 1-1 Overview The SuperWorkstation 7047GR-TRF is comprised of two main subsystems: the SC747TQ-R1620B 4U/Tower chassis and the X9DRG-QF dual Intel Xeon processor serverboard. Please refer to our web site for information on op...

[Page 10] Supero 7047GR-TRF

1-2 SUPERWORKSTATION 7047GR-TRF User's Manual 1-2 Serverboard Features At the heart of the SuperWorkstation 7047GR-TRF lies the X9DRG-QF, a dual processor serverboard based on the Intel C602 chipset. Below are the main features of the X9DRG-QF...

[Page 11] Supero 7047GR-TRF

1-3 Chapter 1: Introduction 1-3 Chassis Features The following is a general outline of the main features of the SC747TQ-R1620B chassis. System Power The SC747TQ-R1620B chassis includes a 1620W high-effi ciency, redundant (1+1) power supply consist...

[Page 12] Supero 7047GR-TRF

1-4 SUPERWORKSTATION 7047GR-TRF User's Manual Figure 1-1. Intel C602 Chipset: System Block Diagram Note: This is a general block diagram. Please see Chapter 5 for details. #1 CPU REAR U7C1 Socket 01 Processor PE3 JPEIC6 PCIE3.0 x16 JPEIC8 PCIE...

[Page 13] Supero 7047GR-TRF

1-5 Chapter 1: Introduction 1-5 Contacting Supermicro Headquarters Address: Super Micro Computer, Inc. 980 Rock Ave. San Jose, CA 95131 U.S.A. Tel: +1 (408) 503-8000 Fax: +1 (408) 503-8008 Email: [email protected] (General Information) sup...

[Page 14] Supero 7047GR-TRF

1-6 SUPERWORKSTATION 7047GR-TRF User's Manual Notes ...

[Page 15] Supero 7047GR-TRF

Chapter 2: Workstation Installation 2-1 Chapter 2 Workstation Installation 2-1 Overview This chapter provides a quick setup checklist to get your SuperWorkstation 7047GR- TRF up and running. Following the steps in the order given should enable you t...

[Page 16] Supero 7047GR-TRF

2-2 SUPERWORKSTATION 7047GR-TRF User's Manual • This product is for installation only in a Restricted Access Location (dedicated equipment rooms, service closets and the like). 2-4 Warnings and Precautions! Rack Precautions • Ensure that t...

[Page 17] Supero 7047GR-TRF

Chapter 2: Workstation Installation 2-3 Rack Mounting Considerations Ambient Operating Temperature If installed in a closed or multi-unit rack assembly, the ambient operating tempera- ture of the rack environment may be greater than the ambient tempe...

[Page 18] Supero 7047GR-TRF

2-4 SUPERWORKSTATION 7047GR-TRF User's Manual Removing the Chassis Cover and Feet The SC747 chassis is shipped with the chassis cover and feet pre-installed. Both the feet and cover must be removed for before installing the rails. Removing the ...

[Page 19] Supero 7047GR-TRF

Chapter 2: Workstation Installation 2-5 Figure 2-1. Removing the Feet and Chassis Top Cover Chassis Cover Chassis Feet Chassis Cover Lock ...

[Page 20] Supero 7047GR-TRF

2-6 SUPERWORKSTATION 7047GR-TRF User's Manual Figure 2-2. Identifying the Inner Rails and Chassis Handles Chassis Handle Inner Rails Installing the Chassis Handles and Inner Rails Installing the Inner Rails 1. Locate the chassis handles and ha...

[Page 21] Supero 7047GR-TRF

Chapter 2: Workstation Installation 2-7 Figure 2-3. Installing the Inner Rack Rails Installing the Outer Rails to the Rack Installing the Outer Rails 1. Attach the rear bracket to the middle bracket. 2. Adjust both the brackets to the proper dista...

[Page 22] Supero 7047GR-TRF

2-8 SUPERWORKSTATION 7047GR-TRF User's Manual Figure 2-5. Installing the Rack Rails Installing the Chassis into a Rack Installing the Chassis 1. Confi rm that chassis includes the inner rails and the outer rails. 2. Align the inner chassis ...

[Page 23] Supero 7047GR-TRF

Chapter 2: Workstation Installation 2-9 2-5 Tower Mounting Instructions The SC747 chassis is shipped with the chassis cover and feet pre-installed. To use the chassis as a desktop workstation, no other installation is required. Use the instructions...

[Page 24] Supero 7047GR-TRF

2-10 SUPERWORKSTATION 7047GR-TRF User's Manual Installing Feet on the Chassis Installing the Chassis Feet 1. Place the chassis foot in the foot receptacle and slide the foot toward the front of the chassis. The foot should lock into place. 2. ...

[Page 25] Supero 7047GR-TRF

Chapter 3: System Interface 3-1 Chapter 3 System Interface 3-1 Overview There are several LEDs on the control panel as well as others on the drive carriers to keep you constantly informed of the overall status of the system as well as the activity...

[Page 26] Supero 7047GR-TRF

3-2 SUPERWORKSTATION 7047GR-TRF User's Manual 3-2 Control Panel Buttons There are two push-buttons located on the front of the chassis. These are power on/off button and a reset button. Power The main power switch is used to apply or remove po...

[Page 27] Supero 7047GR-TRF

Chapter 3: System Interface 3-3 NIC1 Indicates network activity on LAN1 when fl ashing. NIC2 Indicates network activity on LAN2 when fl ashing. Overheat/Fan Fail When this LED fl ashes it indicates a fan failure. When continuously on (not fl ashi...

[Page 28] Supero 7047GR-TRF

3-4 SUPERWORKSTATION 7047GR-TRF User's Manual 3-4 Drive Carrier LEDs Each SATA drive carrier has two LEDs. • Green: Each drive carrier has a green LED. When illuminated, this green LED (on the front of the drive carrier) indicates drive acti...

[Page 29] Supero 7047GR-TRF

4-1 Chapter 4: Warning Statements for AC Systems Chapter 4 Standardized Warning Statements for AC Systems 4-1 About Standardized Warning Statements The following statements are industry standard warnings, provided to warn the user of situations whi...

[Page 30] Supero 7047GR-TRF

4-2 SUPERWORKSTATION 7047GR-TRF User's Manual Warnung WICHTIGE SICHERHEITSHINWEISE Dieses Warnsymbol bedeutet Gefahr. Sie befi nden sich in einer Situation, die zu Verletzungen führen kann. Machen Sie sich vor der Arbeit mit Geräten mit den...

[Page 31] Supero 7047GR-TRF

4-3 Warning Statements for AC Systems BELANGRIJKE VEILIGHEIDSINSTRUCTIES Dit waarschuwings symbool betekent gevaar. U verkeert in een situatie die lichamelijk letsel kan veroorzaken. Voordat u aan enige apparatuur gaat werken, dient u zich bewust t...

[Page 32] Supero 7047GR-TRF

4-4 SUPERWORKSTATION 7047GR-TRF User's Manual Installation Instructions Warning! Read the installation instructions before connecting the system to the power source. Warnung Vor dem Anschließen des Systems an die Stromquelle die Installationsa...

[Page 33] Supero 7047GR-TRF

4-5 Chapter 4: Warning Statements for AC Systems Circuit Breaker Warning! This product relies on the building's installation for short-circuit (overcurrent) protection. Ensure that the protective device is rated not greater than: 250 V, 20 A. ...

[Page 34] Supero 7047GR-TRF

4-6 SUPERWORKSTATION 7047GR-TRF User's Manual Power Disconnection Warning 警告 在你打开机箱并安装或移除内部器件前,必须将系统完全断电,并移除电源线。 警告 在您打開機殼安裝或移除內部元件前,必�...

[Page 35] Supero 7047GR-TRF

4-7 Chapter 4: Warning Statements for AC Systems ¡Advertencia! El sistema debe ser disconnected de todas las fuentes de energía y del cable eléctrico quitado de los módulos de fuente de alimentación antes de tener acceso el interior del chasi...

[Page 36] Supero 7047GR-TRF

4-8 SUPERWORKSTATION 7047GR-TRF User's Manual Equipment Installation Warning! Only trained and qualifi ed personnel should be allowed to install, replace, or service this equipment. Warnung Das Installieren, Ersetzen oder Bedienen dieser Aus...

[Page 37] Supero 7047GR-TRF

4-9 Chapter 4: Warning Statements for AC Systems Warning! This unit is intended for installation in restricted access areas. A restricted access area can be accessed only through the use of a special tool, lock and key, or other means of security....

[Page 38] Supero 7047GR-TRF

4-10 SUPERWORKSTATION 7047GR-TRF User's Manual Battery Handling Warning! There is the danger of explosion if the battery is replaced incorrectly. Replace the battery only with the same or equivalent type recommended by the manufacturer. Dispo...

[Page 39] Supero 7047GR-TRF

4-11 Chapter 4: Warning Statements for AC Systems Warnung Bei Einsetzen einer falschen Batterie besteht Explosionsgefahr. Ersetzen Sie die Batterie nur durch den gleichen oder vom Hersteller empfohlenen Batterietyp. Entsorgen Sie die benutzten Bat...

[Page 40] Supero 7047GR-TRF

4-12 SUPERWORKSTATION 7047GR-TRF User's Manual Warnung Dieses Gerät kann mehr als eine Stromzufuhr haben. Um sicherzustellen, dass der Einheit kein trom zugeführt wird, müssen alle Verbindungen entfernt werden. ¡Advertencia! Puede que est...

[Page 41] Supero 7047GR-TRF

4-13 Chapter 4: Warning Statements for AC Systems Backplane Voltage 警告 当系统正在进行时,背板上有很危险的电压或能量,进行维修时务必小心。 警告 當系統正在進行時,背板上有危險的電壓或能量,�...

[Page 42] Supero 7047GR-TRF

4-14 SUPERWORKSTATION 7047GR-TRF User's Manual Comply with Local and National Electrical Codes Warning! Installation of the equipment must comply with local and national electrical codes. Warnung Die Installation der Geräte muss den Sicherhei...

[Page 43] Supero 7047GR-TRF

4-15 Chapter 4: Warning Statements for AC Systems Product Disposal Warning! Ultimate disposal of this product should be handled according to all national laws and regulations. יצראה למשחה יקוח םואית !הרהזא תנקתה...

[Page 44] Supero 7047GR-TRF

4-16 SUPERWORKSTATION 7047GR-TRF User's Manual Waarschuwing De uiteindelijke verwijdering van dit product dient te geschieden in overeenstemming met alle nationale wetten en reglementen. ¡Advertencia! Al deshacerse por completo de este produ...

[Page 45] Supero 7047GR-TRF

4-17 Chapter 4: Warning Statements for AC Systems Warnung Die Lüfter drehen sich u. U. noch, wenn die Lüfterbaugruppe aus dem Chassis genommen wird. Halten Sie Finger, Schraubendreher und andere Gegenstände von den Öffnungen des Lüftergehäuse...

[Page 46] Supero 7047GR-TRF

4-18 SUPERWORKSTATION 7047GR-TRF User's Manual Warning! When installing the product, use the provided or designated connection cables, power cables and AC adaptors. Using any other cables and adaptors could cause a malfunction or a fi re. El...

[Page 47] Supero 7047GR-TRF

4-19 Chapter 4: Warning Statements for AC Systems Attention Lors de l'installation du produit, utilisez les bables de connection fournis ou désigné. L'utilisation d'autres cables et adaptateurs peut provoquer un dysfonctionnement ...

[Page 48] Supero 7047GR-TRF

4-20 SUPERWORKSTATION 7047GR-TRF User's Manual Notes ...

[Page 49] Supero 7047GR-TRF

Chapter 5: Advanced Serverboard Setup 5-1 Chapter 5 Advanced Serverboard Setup This chapter covers the steps required to install the X9DRG-QF serverboard into the chassis, connect the data and power cables and install add-on cards. All serverboard ...

[Page 50] Supero 7047GR-TRF

5-2 SUPERWORKSTATION 7047GR-TRF User's Manual Unpacking The serverboard is shipped in antistatic packaging to avoid electrical static discharge. When unpacking the board, make sure the person handling it is static protected. 5-2 Connecting Ca...

[Page 51] Supero 7047GR-TRF

Chapter 5: Advanced Serverboard Setup 5-3 Rear I/O Ports 1. COM1 Port 2. USB0 Port 3. USB1 Port 4. Dedicated IPMI LAN Port 5. USB2 Port 6. USB3 Port 7. LAN1 Port 8. LAN2 Port 9. VGA Port 10. UID Switch Figure 5-1. Control Panel Header Pins 5-3 I/O ...

[Page 52] Supero 7047GR-TRF

5-4 SUPERWORKSTATION 7047GR-TRF User's Manual 1. There are two levers on the LGA2011 socket. First press and release the load lever labeled 'Open 1st' on CPU socket 1. 2. Press the second load lever labeled 'Close 1st' ...

[Page 53] Supero 7047GR-TRF

Chapter 5: Advanced Serverboard Setup 5-5 Gently push down to pop the load plate open. 3. With the lever labeled 'Close 1st' fully retracted, gently push down on the 'Open 1st' lever to open the load plate. Lift the load pl...

[Page 54] Supero 7047GR-TRF

5-6 SUPERWORKSTATION 7047GR-TRF User's Manual Installing the Heatsink 1. Do not apply any thermal grease to the heatsink or the CPU die; the required amount has already been applied. 2. Place the heatsink on top of the CPU so that the four mo...

[Page 55] Supero 7047GR-TRF

Chapter 5: Advanced Serverboard Setup 5-7 Screw#1 Screw#2 Screw#3 Top View Bottom View Side View Side View Screw#1 Screw#2Screw#3 Screw#4 Removing the Heatsink 1. Remove the power cord from the system before removing the heatsink. ...

[Page 56] Supero 7047GR-TRF

5-8 SUPERWORKSTATION 7047GR-TRF User's Manual Installing Memory Modules 1. Insert the desired number of DIMMs into the memory slots, starting with P1-DIMMA1. For best memory performance, please install memory modules of the same type and same...

[Page 57] Supero 7047GR-TRF

Chapter 5: Advanced Serverboard Setup 5-9 Memory Support for the X9DRG-QF Serverboard The X9DRG-QF serverboard supports up to 512 GB of DDR3-1600/1333/1066/800 RDIMM, LRDIMM or UDIMM ECC/non-ECC memory in 16 DIMM slots. See the following table for ...

[Page 58] Supero 7047GR-TRF

5-10 SUPERWORKSTATION 7047GR-TRF User's Manual Populating UDIMM (ECC/Non-ECC) Memory Modules Intel E5-2600 Series Processor UDIMM Memory Support Ranks Per DIMM & Data Width Memory Capacity Per DIMM (See the Note below) Speed (MT/s) and Vo...

[Page 59] Supero 7047GR-TRF

Chapter 5: Advanced Serverboard Setup 5-11 Populating LRDIMM ECC Memory Modules Intel E5-2600 Series Processor LRDIMM Memory Support Ranks Per DIMM & Data Width (See the Note Below) Memory Capacity Per DIMM Speed (MT/s) and Voltage Validated ...

[Page 60] Supero 7047GR-TRF

5-12 SUPERWORKSTATION 7047GR-TRF User's Manual Press the Middle of the Release Tab Lift the Release Tab Figure 5-5: Add-on Card/Expansion Card Port 5-6 Adding PCI Add-On Cards The 7047GR-TRF can support four PCI-E 3.0 x16 (may suport four dou...

[Page 61] Supero 7047GR-TRF

Chapter 5: Advanced Serverboard Setup 5-13 Figure 5-6. X9DRG-QF Layout (not drawn to scale) 5-7 Serverboard Details Note: Jumpers not indicated are for test purposes only. JTPM1 JBT1 SP1 FAN-I1 JUIDB PS2 KB/MS IPMI_LAN JPW4 JITP2 JITP1 LED3 FANC FAN...

[Page 62] Supero 7047GR-TRF

5-14 SUPERWORKSTATION 7047GR-TRF User's Manual Connector Description AUDIO_FP Front Panel Audio Header (Optional) COM1/COM2 Back Panel COM Port1/Front Accessible COM2 Header FAN#1~6, FAN #A~D, FAN11 CPU/System Fan Headers (Fan1~Fan4, Fan5: CPU1...

[Page 63] Supero 7047GR-TRF

Chapter 5: Advanced Serverboard Setup 5-15 5-8 Connector Defi nitions Power Connections A 24-pin main power supply connector(JPW1), two 8-pin CPU PWR connectors (JPW2/ JPW3) and a 4-pin PWR connector (JPW4) are provided on the serverboard. These ...

[Page 64] Supero 7047GR-TRF

5-16 SUPERWORKSTATION 7047GR-TRF User's Manual NIC1/NIC2 LED Indicators The NIC (Network Interface Controller) LED connection for GLAN port 1 is located on pins 11 and 12 of JF1, and the LED connection for GLAN Port 2 is on Pins 9 and 10. At...

[Page 65] Supero 7047GR-TRF

Chapter 5: Advanced Serverboard Setup 5-17 Power Button The Power Button connection is located on pins 1 and 2 of JF1. Momentarily contacting both pins will power on/off the system. This button can also be confi gured to function as a suspend ...

[Page 66] Supero 7047GR-TRF

5-18 SUPERWORKSTATION 7047GR-TRF User's Manual Standby Power Header The +5V Standby Power header is located at JSTBY1 on the motherboard. See the table on the right for pin defi nitions. (You must also have a card with a Standby Power conne...

[Page 67] Supero 7047GR-TRF

Chapter 5: Advanced Serverboard Setup 5-19 Chassis Intrusion A Chassis Intrusion header is located at JL1 on the serverboard. Attach an appropriate cable from the chassis to inform you of a chassis intrusion when the chassis is opened. Chassis I...

[Page 68] Supero 7047GR-TRF

5-20 SUPERWORKSTATION 7047GR-TRF User's Manual TPM Header/Port 80 Header A Trusted Platform Module/Port 80 header is located at JTPM1 to provide TPM support and Port 80 connection. Use this header to enhance system performance and data secur...

[Page 69] Supero 7047GR-TRF

Chapter 5: Advanced Serverboard Setup 5-21 IPMB A System Management Bus header for IPMI 2.0 is located at JIPMB1. Connect the appropriate cable here to use the IPMB I 2 C connection on your system. IPMB Header Pin Defi nitions Pin# Defi ...

[Page 70] Supero 7047GR-TRF

5-22 SUPERWORKSTATION 7047GR-TRF User's Manual 5-9 Jumper Settings Explanation of Jumpers To modify the operation of the serverboard, jumpers can be used to choose between optional settings. Jumpers create shorts between two pins to change ...

[Page 71] Supero 7047GR-TRF

Chapter 5: Advanced Serverboard Setup 5-23 VGA Enable/Disable JPG1 allows you to enable or disable the VGA port. The default position is on pins 1 and 2 to enable VGA. See the table on the right for jumper settings. VGA Enable/Disable Jumper Sett...

[Page 72] Supero 7047GR-TRF

5-24 SUPERWORKSTATION 7047GR-TRF User's Manual GLAN LEDs There are two GLAN ports on the serverboard. An additional IPMI dedicated LAN port is also located above the USB 0/1 ports on the backpanel. Each Gigabit Ethernet LAN port has two LED...

[Page 73] Supero 7047GR-TRF

Chapter 5: Advanced Serverboard Setup 5-25 5-11 SATA Ports Serial ATA Pin Defi nitions Pin# Defi nition 1 Ground 2 TX_P 3 TX_N 4 Ground 5 RX_N 6 RX_P 7 Ground Serial ATA Ports There are six Serial ATA 3.0 Ports (I- SATA0~I-SATA5) and four SATA ...

[Page 74] Supero 7047GR-TRF

5-26 SUPERWORKSTATION 7047GR-TRF User's Manual 5-12 Installing Software After the hardware has been installed, you should fi rst install the operating system and then the drivers. The necessary drivers are all included on the Supermicro CDs t...

[Page 75] Supero 7047GR-TRF

Chapter 5: Advanced Serverboard Setup 5-27 Supero Doctor III The Supero Doctor III program is a Web base management tool that supports remote management capability. It includes Remote and Local Management tools. The local management is called SD II...

[Page 76] Supero 7047GR-TRF

5-28 SUPERWORKSTATION 7047GR-TRF User's Manual Note: SD III Software Revision 1.0 can be downloaded from our Web Site at: ftp://ftp. supermicro.com/utility/Supero_Doctor_III/. You can also download the SDIII User's Guide at: <http://www...

[Page 77] Supero 7047GR-TRF

Chapter 6: Advanced Chassis Setup 6-1 Chapter 6 Advanced Chassis Setup This chapter covers the steps required to install components and perform maintenance on the chassis. The only tool you will need to install components and perform maintenance i...

[Page 78] Supero 7047GR-TRF

6-2 SUPERWORKSTATION 7047GR-TRF User's Manual 6-1 Static-Sensitive Devices Electrostatic Discharge (ESD) can damage electronic com ponents. To prevent damage to any printed circuit boards (PCBs), it is important to handle them very carefully. ...

[Page 79] Supero 7047GR-TRF

Chapter 6: Advanced Chassis Setup 6-3 6-3 System Cooling Six heavy-duty fans provide cooling for the chassis. Four fans are located in the mid-section of the chassis with two fans in the rear. These fans circulate air through the chassis as a means...

[Page 80] Supero 7047GR-TRF

6-4 SUPERWORKSTATION 7047GR-TRF User's Manual Rear Fan Release Tab Figure 6-4. Rear System Chassis Fans Figure 6-3. Mid-System Chassis Fans Mid Fan Release Tab ...

[Page 81] Supero 7047GR-TRF

Chapter 6: Advanced Chassis Setup 6-5 6-4 Power Supply The SC747 chassis has a 1620W (redundant) power supply. This power supply is auto-switching capable. This enables it to automatically sense and operate at a 100v to 240v input voltage. An amber...

[Page 82] Supero 7047GR-TRF

6-6 SUPERWORKSTATION 7047GR-TRF User's Manual Power Supply Cables Name Qty Connects to: Description 20-pin or 24-pin power cable 1 Serverboard 20-pin or 24-pin power cable provides electricity to the serverboard. and has twenty to twenty-four...

[Page 83] Supero 7047GR-TRF

Chapter 6: Advanced Chassis Setup 6-7 6-5 Confi guring the Storage Module This section covers confi guring the storage module in the SC747 chassis. Storage Module Tower or Rack Confi guration The SC747 chassis is shipped in tower mode and can be ...

[Page 84] Supero 7047GR-TRF

6-8 SUPERWORKSTATION 7047GR-TRF User's Manual Rotating the Storage Module for Rack Mounting 1. Open the chassis cover. 2. Locate the storage module and disconnect any cables from the storage module to any component in the chassis. 3. Push th...

[Page 85] Supero 7047GR-TRF

Chapter 6: Advanced Chassis Setup 6-9 Figure 6-9. Chassis Storage Module 5. Turn the storage module 90 degrees (as illustrated). 6. Reinsert the module into the chassis and reconnect the cords. Installing Drives in the Storage Module The storage m...

[Page 86] Supero 7047GR-TRF

6-10 SUPERWORKSTATION 7047GR-TRF User's Manual Removing a Drive Carrier Use the procedure below to add hard drives to the drive carriers. Adding Hard Drives to the Drive Carriers 1. Open the chassis cover. 2. Locate the drive tray release tab ...

[Page 87] Supero 7047GR-TRF

Chapter 6: Advanced Chassis Setup 6-11 Hard Drive Hard Drive Tray Figure 6-11. Adding a Hard Drive to the Drive Carrier 4. Place the hard drive to the hard drive tray. The hard drive may not completely fi ll the tray. See Figure 6-11 for details....

[Page 88] Supero 7047GR-TRF

6-12 SUPERWORKSTATION 7047GR-TRF User's Manual Adding Peripheral Drives You can add up to three peripheral drives (DVD-ROM, CD-ROM, fl oppy drive, etc.) to the drive trays using the procedure below. Adding Peripheral Drives 1. Open the chassi...

[Page 89] Supero 7047GR-TRF

Chapter 6: Advanced Chassis Setup 6-13 6-6 Installing Hard Drives in the Chassis Chassis hard drives are mounted in drive carriers to simplify their installation and removal from the chassis. These carriers also help promote proper airfl ow for th...

[Page 90] Supero 7047GR-TRF

6-14 SUPERWORKSTATION 7047GR-TRF User's Manual Figure 6-14. Removing a Dummy Drive Tray 7. Insert the hard drive into the chassis. To do this: a. Press the hard drive release button to extend the drive tray handle. b. Insert the hard drive i...

[Page 91] Supero 7047GR-TRF

Chapter 7: BIOS 7-1 Chapter 7 BIOS 7-1 Introduction This chapter describes the AMI BIOS Setup utility for the X9DRG-QF. It also provides the instructions on how to navigate the AMI BIOS Setup utility screens. The AMI ROM BIOS is stored in a Fla...

[Page 92] Supero 7047GR-TRF

SUPERWORKSTATION 7047GR-TRF User's Manual 7-2 How To Change the Confi guration Data The confi guration data that determines the system parameters may be changed by entering the AMI BIOS Setup utility. This Setup utility can be accessed by pre...

[Page 93] Supero 7047GR-TRF

Chapter 7: BIOS 7-3 The AMI BIOS Main menu displays the following information: System Date/System Time Use this option to change the system time and date. Highlight System Time or System Date using the arrow keys. Enter new values through the keyboa...

[Page 94] Supero 7047GR-TRF

SUPERWORKSTATION 7047GR-TRF User's Manual 7-4 7-3 Advanced Setup Confi gurations Select the Advanced tab to access the following submenu items. XBoot Features Quiet Boot This feature allows the user to select bootup screen display between PO...

[Page 95] Supero 7047GR-TRF

Chapter 7: BIOS 7-5 Interrupt 19 Capture Interrupt 19 is the software interrupt that handles the boot disk function. When this item is set to Enabled, the ROM BIOS of the host adaptors will "capture" Interrupt 19 at bootup and allow the d...

[Page 96] Supero 7047GR-TRF

SUPERWORKSTATION 7047GR-TRF User's Manual 7-6 • CPU Stepping • Maximum CPU Speed • Minimum CPU Speed • Processor Cores • Intel HT (Hyper-Threading) Technology • Intel VT-x Technology • Intel SMX Technology • L1 Data Cache • L1 ...

[Page 97] Supero 7047GR-TRF

Chapter 7: BIOS 7-7 Active Processor Cores Set to Enabled to use a processor's second core and above. (Please refer to Intel's website for more information.) The options are All, 1, 2, 4 and 6. Limit CPUID Maximum This feature allows the ...

[Page 98] Supero 7047GR-TRF

SUPERWORKSTATION 7047GR-TRF User's Manual 7-8 Intel® Virtualization Technology (Available when supported by the CPU) Select Enabled to support Intel Virtualization Technology, which will allow one platform to run multiple operating systems and...

[Page 99] Supero 7047GR-TRF

Chapter 7: BIOS 7-9 CPU C6 Report (Available when Power Technology is set to Custom) Select Enabled to allow the BIOS to report the CPU C6 State (ACPI C3) to the operating system. During the CPU C6 State, the power to all cache is turned off. The o...

[Page 100] Supero 7047GR-TRF

SUPERWORKSTATION 7047GR-TRF User's Manual 7-10 Short Duration Power Limit This item displays the time period during which short duration power is main- tained. The default setting is 0. XChipset Confi guration XNorth Bridge This feature allows ...