Hanna Instruments HI9061 Instruction Manual

[Page 1] Hanna Instruments HI9061

Instruction Manual HI 9060 HI 9061 HI 91541 Portable Waterproof Microprocessor Thermistor Thermometers ins e rum n s CLEAR HI LO HOLD HI 9060 microcomputer thermometer °C/°F °C ON/OFF -50 .. .. .. .. +150°C -58 .. .. .. .. +302°F http://www.hann...

[Page 2] Hanna Instruments HI9061

2 Dear Customer, Thank you for choosing a Hanna Instruments Product. Please read this instruction manual carefully before using the instrument. This manual will provide you with all the nec- essary information for the correct use of the instrument, a...

[Page 3] Hanna Instruments HI9061

3 PRELIMINARY EXAMINATION Remove the instrument from the packing ma- terial and examine it carefully to make sure that no damage has occurred during ship- ment. If noticeable damage is found, notify your Dealer. Note: Save all packing material until ...

[Page 4] Hanna Instruments HI9061

4 complete with 4 batteries (1.5V, AA size). Upon request these meters can be supplied with a Factory Calibration Certificate against NIST standard. Several types of HI765 tem- perature probes are available to meet all your requirements (see page 15)...

[Page 5] Hanna Instruments HI9061

5 Specifications HI 9060 Range -50.0 to 150.0°C -58.0 to 199.9 & 200 to 302°F Resolution 0.1°C / 0.1°F and 1°F Accuracy ±0.3% of Full Scale, for one year, (@20°C/68°F) excluding probe error Typical EMC ±1°C/±2°F Deviation wi...

[Page 6] Hanna Instruments HI9061

6 FUNCTIONAL DESCRIPTION HI 9061 Specifications HI 9061C HI 9061F Range -50.0 to 150.0°C -55.0 to 199.9°F 200 to 302°F Resolution 0.1°C 0.1 / 1°F Accuracy ±0.4°C (-20 to 80°C) ±0.8°F(-4 to 176°F) (@20°C/68°F) ±0.3% F.S. (outside) �...

[Page 7] Hanna Instruments HI9061

7 FUNCTIONAL DESCRIPTION HI 91541 Specifications HI 91541C HI 91541F Range -50.0 to 300.0°C -55.0 to 299.9°F 300 to 570°F Resolution 0.1°C 0.2°F up to 300°F Accuracy ±0.4°C (up to 150°C) ±0.8°F(up to 300°F) (@20°C/68°F) ±0.3% F.S....

[Page 8] Hanna Instruments HI9061

8 OPERATIONAL GUIDE INITIAL PREPARATION Each meter is supplied com- plete with batteries. Remove the back cover, un- wrap the batteries and install them while paying attention to their polarity. To switch on, press the ON/OFF key on the front of the ...

[Page 9] Hanna Instruments HI9061

9 HI / LO MEMORIES (for HI 9060 only) The maximum and minimum temperatures are monitored throughout a continuous measur- ing process. The values may be recalled or cleared at any time during the measurement. Enquiries of the highest or lowest measure...

[Page 10] Hanna Instruments HI9061

10 HOLD MODE (for HI 9060 only) The reading hold function is activated by the HOLD key. The measured temperature is frozen on the display when this function key is pressed. A blinking "M" on the display indicates the operating mode. Press t...

[Page 11] Hanna Instruments HI9061

11 HI 9060 and HI 9061 stop to operate when the low battery signal is detected. The user is warned by the code "Eb". HI 91541 displays "BAT" when the batteries are run down. See also the Battery Replacement section on page 14. BAT...

[Page 12] Hanna Instruments HI9061

12 Your thermometer is factory programmed to diagnose a fault or warn of low battery levels. This is indicated by the error codes on the LCD. Moreover, self-explanatory sym- bols are used to remind the user of the operating mode or conditions. DISPLA...

[Page 13] Hanna Instruments HI9061

13 CALIBRATION All Hanna Instruments thermometers have been accurately pre-calibrated at the factory. It is generally recommended to have all ther- mometers recalibrated at least once a year. For an accurate annual recalibration, contact your nearest...

[Page 14] Hanna Instruments HI9061

14 BATTERY REPLACEMENT When the batteries be- come weak, the meter displays "Eb" (for HI9060 and HI9061) or "BAT" (for HI91541) to warn the user. Battery replacement must only take place in a non hazardous area using the battery t...

[Page 15] Hanna Instruments HI9061

15 TEMPERATURE PROBES & ACCESSORIES Hanna Instruments offers a wide range of probes to meet all your requirements from liquids to air and penetration to surface. These probes use highly sensitive thermistor sensors which provide greater accuracy,...

[Page 16] Hanna Instruments HI9061

16 cable and green handle HI765PG/10Penetration probe with 10 m (33') cable and green handle HI765PR Penetration probe with 1 m (3.3') cable and red handle HI 765PR/10 Penetration probe with 10 m (33') cable and red handle HI 765PW Pen...

[Page 17] Hanna Instruments HI9061

17 cable and white handle HI 764W Wire probe, without handle (hard- to-reach places) with 1 m (3.3') cable HI 764W/10 Wire probe, without handle (hard- to-reach places) with 10 m (33')cable Hanna Instruments Temperature Probes 3 mm 0.12&qu...

[Page 18] Hanna Instruments HI9061

18 All Hanna Instruments meters are warranted for two years against defects in workmanship and materials when used for their intended purpose and maintained according to instruc- tions. The probes and calibration keys are war- ranted for a period of ...

[Page 19] Hanna Instruments HI9061

19 CE DECLARATION OF CONFORMITY Recommendations for Users Before using these products, make sure that they are entirely suitable for the environment in which they are used. Operation of these instruments in residential area could cause unacceptable i...

[Page 20] Hanna Instruments HI9061

MAN60R4 02/00 PRINTED IN PORTUGAL http://www.hannacan.com HANNA LITERATUREHANNA LITERATURE HANNA LITERATUREHANNA LITERATURE HANNA LITERATURE Hanna publishes a wide range of catalogs and hand- books for an equally wide range of applications. The refer...