Electrosonic ImageStar HD User Manual

Download or browse on-line these Operation & User’s Manual for Electrosonic ImageStar HD Processor.

Electrosonic ImageStar HD Manual Information:

This manual for Electrosonic ImageStar HD, given in the PDF format, is available for free online viewing and download without logging on. The guide contains 90 pages, and the size of the file at download is . The document type is Operation & User’s Manual.

Download Manual

Summary of Contents:

[Page 1] Electrosonic ImageStar HD

ELECTROSONIC ImageStar HD ...

[Page 2] Electrosonic ImageStar HD

IMAGESTAR HD USER GUIDE Part No. I460GB issue 4 (27-Aug-08) Copyright © 2008 Electrosonic Ltd. All rights reserved. No part of this documentation may be reproduced or t...

[Page 3] Electrosonic ImageStar HD

IMPORTANT SAFETY MARKINGS The following symbols are used throughout this User Guide to advise you of important instructions: This symbol warns the presence of a voltage of sufficient magnitude to cause a severe or fatal electric shock. Follo...

[Page 4] Electrosonic ImageStar HD

...

[Page 5] Electrosonic ImageStar HD

IMAGESTAR HD USER GUIDE Contents I460GB issue 4 Page 5 Contents ContentsContents Contents SECTION 1: SECTION 1:SECTION 1: SECTION 1: ................................ ................................................................ .......

[Page 6] Electrosonic ImageStar HD

Contents IMAGESTAR HD USER GUIDE Page 6 I460GB issue 4 Mains Power Connection (via PSU)........................................................................... 23 Supply Requirements (for PSU)...............................................

[Page 7] Electrosonic ImageStar HD

IMAGESTAR HD USER GUIDE Contents I460GB issue 4 Page 7 SECTION 4: SECTION 4:SECTION 4: SECTION 4: ................................ ................................................................ ................................................

[Page 8] Electrosonic ImageStar HD

Section 1: Introduction IMAGESTAR HD USER GUIDE Page 8 I460GB issue 4 This page is intentionally left blank. ...

[Page 9] Electrosonic ImageStar HD

IMAGESTAR HD USER GUIDE Section 1: Introduction I460GB issue 4 Page 9 SECTION SECTIONSECTION SECTION 1: 1: 1: 1: Introduction ...

[Page 10] Electrosonic ImageStar HD

Section 1: Introduction IMAGESTAR HD USER GUIDE Page 10 I460GB issue 4 What is ImageStar HD? ImageStar HD is a compact, high performance image processor for scaling a variety of input source types, including high definition video or grap...

[Page 11] Electrosonic ImageStar HD

IMAGESTAR HD USER GUIDE Section 1: Introduction I460GB issue 4 Page 11 Typical System Application Single Unit Example Using a single ImageStar HD to show a source on a 2×2 target display: Source ImageStar HD Multiple Unit Examp...

[Page 12] Electrosonic ImageStar HD

Section 1: Introduction IMAGESTAR HD USER GUIDE Page 12 I460GB issue 4 Front Panel Features ELECTROSONIC CONTROL PANEL INDICATORS SELECT button POWER Active Input Indicators Infra Red Sensor NETWORK Indicators The green ...

[Page 13] Electrosonic ImageStar HD

IMAGESTAR HD USER GUIDE Section 1: Introduction I460GB issue 4 Page 13 Rear Panel Features DISPLAY OUTPUT CONNECTORS ES5555 2A MAX 2 RGB 1 RGB DVI-I DVI-I DVI-I DVI-I 12V DC REG OUTPUT Y C SVIDEO 3 VIDEO 4 VIDEO 1 42 3 SOURCE INPUT ...

[Page 14] Electrosonic ImageStar HD

Section 1: Introduction IMAGESTAR HD USER GUIDE Page 14 I460GB issue 4 Source Compatibility Source Types ImageStar HD provides inputs for up to four sources, which can comprise:  Up to two analog RGB or component video (YCrCb or...

[Page 15] Electrosonic ImageStar HD

IMAGESTAR HD USER GUIDE Section 1: Introduction I460GB issue 4 Page 15 Display Capability ImageStar HD allows any one of the four possible inputs to be scaled up to fill the target display. Output Channels The ImageStar HD has four ou...

[Page 16] Electrosonic ImageStar HD

Section 1: Introduction IMAGESTAR HD USER GUIDE Page 16 I460GB issue 4 Source Scaling & Viewporting Typically the selected input source will be scaled to fill the entire target display area. Where the aspect ratio of the display does...

[Page 17] Electrosonic ImageStar HD

IMAGESTAR HD USER GUIDE Section 1: Introduction I460GB issue 4 Page 17 Control Capability Front Panel Control The SELECT push-button on the front panel provides source selection. Each press will switch to the next source input. The cu...

[Page 18] Electrosonic ImageStar HD

Section 1: Introduction IMAGESTAR HD USER GUIDE Page 18 I460GB issue 4 Accessories Supplied Accessories In addition to this User Guide, the ImageStar HD is supplied with the following accessories. If any of these items is missing or dam...

[Page 19] Electrosonic ImageStar HD

IMAGESTAR HD USER GUIDE Section 2: Installation I460GB issue 4 Page 19 SECTION 2: SECTION 2:SECTION 2: SECTION 2: Installation ...

[Page 20] Electrosonic ImageStar HD

Section 2: Installation IMAGESTAR HD USER GUIDE Page 20 I460GB issue 4 Choosing a Suitable Location The ImageStar HD is designed to be used either as a free-standing unit or (by using the optional kit available) to be mounted in a 19 inc...

[Page 21] Electrosonic ImageStar HD

IMAGESTAR HD USER GUIDE Section 2: Installation I460GB issue 4 Page 21 Environmental Requirements CAUTION The criteria on this page must be observed for all installations of the ImageStar HD, whether free-standing or rack-mounted. ...

[Page 22] Electrosonic ImageStar HD

Section 2: Installation IMAGESTAR HD USER GUIDE Page 22 I460GB issue 4 Rack-mount Requirements CAUTION For rack-mounted installations, the following criteria must be observed (in addition to the Environmental Requirements listed on ...

[Page 23] Electrosonic ImageStar HD

IMAGESTAR HD USER GUIDE Section 2: Installation I460GB issue 4 Page 23 Mains Power Connection (via PSU) The ImageStar HD must be powered from a 12 Volt DC regulated supply. A suitable mains-operated power supply unit (PSU) is provided. ...

[Page 24] Electrosonic ImageStar HD

Section 2: Installation IMAGESTAR HD USER GUIDE Page 24 I460GB issue 4 Mains Power Cord (for PSU) The mains PSU is equipped with a 3-pin (male) type mains connector which requires a power cord fitted with a corresponding 3-pin IEC320 (fe...

[Page 25] Electrosonic ImageStar HD

IMAGESTAR HD USER GUIDE Section 2: Installation I460GB issue 4 Page 25 Fitting a Mains Plug If you are fitting a plug to the unterminated power cord (or replacing an existing plug), you must fit a plug that: • is rated for use wit...

[Page 26] Electrosonic ImageStar HD

Section 2: Installation IMAGESTAR HD USER GUIDE Page 26 I460GB issue 4 External Supply Protection The mains power cord supplied with this product is rated at 10A maximum and must be protected from overload by an external fuse or circui...

[Page 27] Electrosonic ImageStar HD

IMAGESTAR HD USER GUIDE Section 2: Installation I460GB issue 4 Page 27 Source Connections RGB Sources Component sources (e.g. RGB, YCrCb or YPrPb) can be connected to either input 1 or 2: ES5555 2A MAX 2 RGB 1 RGB DVI-I DVI-I D...

[Page 28] Electrosonic ImageStar HD

Section 2: Installation IMAGESTAR HD USER GUIDE Page 28 I460GB issue 4 Composite Sources Composite sources (e.g. CVBS) can be connected to either input 3 or 4: ES5555 2A MAX 2 RGB 1 RGB DVI-I DVI-I DVI-I DVI-I 12V DC REG OUTPUT ...

[Page 29] Electrosonic ImageStar HD

IMAGESTAR HD USER GUIDE Section 2: Installation I460GB issue 4 Page 29 S-Video Source S-Video sources (e.g. YC) can be connected using input 3 and 4, Luma (Y) to input 3 and Chroma (C) to input 4: S-VIDEO Source Y C ES5555 2A MAX 2 ...

[Page 30] Electrosonic ImageStar HD

Section 2: Installation IMAGESTAR HD USER GUIDE Page 30 I460GB issue 4 Display Connections Digital Displays Connect analog display devices to the outputs using suitable DVI-D type connectors and cables. The diagram below shows the de...

[Page 31] Electrosonic ImageStar HD

IMAGESTAR HD USER GUIDE Section 2: Installation I460GB issue 4 Page 31 Analog Displays Connect analog display devices to the outputs using suitable DVI-A type connectors and cables. NOTE: 15-pin RGB type connectors and cables can als...

[Page 32] Electrosonic ImageStar HD

Section 2: Installation IMAGESTAR HD USER GUIDE Page 32 I460GB issue 4 This page is intentionally left blank. ...

[Page 33] Electrosonic ImageStar HD

IMAGESTAR HD USER GUIDE Section 3: Configuration I460GB issue 4 Page 33 SECTION 3: SECTION 3:SECTION 3: SECTION 3: Configuration ...

[Page 34] Electrosonic ImageStar HD

Section 3: Configuration IMAGESTAR HD USER GUIDE Page 34 I460GB issue 4 Introduction & Overview ImageStar HD Configuration is a Windows software application that is used to configure the inputs and outputs of the ImageStar HD image p...

[Page 35] Electrosonic ImageStar HD

IMAGESTAR HD USER GUIDE Section 3: Configuration I460GB issue 4 Page 35 Overview of the Workspace After starting ImageStar HD Configuration you will be presented with an application window similar to the following example: Windo...

[Page 36] Electrosonic ImageStar HD

Section 3: Configuration IMAGESTAR HD USER GUIDE Page 36 I460GB issue 4 Menu Bar The menu bar provides access to various functions. The basic File, Window and Help menus are always available and these are supplemented with additional...

[Page 37] Electrosonic ImageStar HD

IMAGESTAR HD USER GUIDE Section 3: Configuration I460GB issue 4 Page 37 Example Layout The following view shows an example of ImageStar HD Configuration in use and gives an indication of what you can expect to see in each window: ...

[Page 38] Electrosonic ImageStar HD

Section 3: Configuration IMAGESTAR HD USER GUIDE Page 38 I460GB issue 4 Saving and Opening Configuration Files The settings that you define in ImageStar Configuration can be saved as a configuration file. This allows you to keep a safe b...

[Page 39] Electrosonic ImageStar HD

IMAGESTAR HD USER GUIDE Section 3: Configuration I460GB issue 4 Page 39 To Load an Existing Configuration File…  Click the File menu and choose Open. The standard Windows Open dialog will appear: HINT: Some sample conf...

[Page 40] Electrosonic ImageStar HD

Section 3: Configuration IMAGESTAR HD USER GUIDE Page 40 I460GB issue 4 Using ImageStar HD on a Network In normal standalone operation, the ImageStar HD does not require a network connection. However, to configure the unit, it is neces...

[Page 41] Electrosonic ImageStar HD

IMAGESTAR HD USER GUIDE Section 3: Configuration I460GB issue 4 Page 41 Rebooting the ImageStar HD In certain circumstances it will be necessary to reboot the ImageStar HD to ensure that new settings are correctly implemented. For exampl...

[Page 42] Electrosonic ImageStar HD

Section 3: Configuration IMAGESTAR HD USER GUIDE Page 42 I460GB issue 4 Using ImageStar HD Configuration The remaining pages in this section contain various procedures for creating a configuration for ImageStar HD. Set up falls broadl...

[Page 43] Electrosonic ImageStar HD

IMAGESTAR HD USER GUIDE Section 3: Configuration I460GB issue 4 Page 43 Setting-up Network Communications Adding ImageStar HD Devices If the PC or laptop running ImageStar HD Configuration is connected to the same network as an ImageS...

[Page 44] Electrosonic ImageStar HD

Section 3: Configuration IMAGESTAR HD USER GUIDE Page 44 I460GB issue 4 A new device entry will appear in both the Network and ImageStar HD Devices windows:  If you need to change the device name or IP settings for this device, ...

[Page 45] Electrosonic ImageStar HD

IMAGESTAR HD USER GUIDE Section 3: Configuration I460GB issue 4 Page 45 To add a device manually…  Click the Network window.  Click the Network menu and choose Add. The ImageStar HD Node dialog box will appear:  ...

[Page 46] Electrosonic ImageStar HD

Section 3: Configuration IMAGESTAR HD USER GUIDE Page 46 I460GB issue 4 Changing Network Settings for a Device  In the Network window, double-click the Local Name of the required device. The ImageStar HD Node dialog box will appear...

[Page 47] Electrosonic ImageStar HD

IMAGESTAR HD USER GUIDE Section 3: Configuration I460GB issue 4 Page 47 Updating an ImageStar HD (Network Settings) Any changes that you make to the network settings in ImageStar HD Configuration are not automatically sent to the actual ...

[Page 48] Electrosonic ImageStar HD

Section 3: Configuration IMAGESTAR HD USER GUIDE Page 48 I460GB issue 4 To update the Network Settings of an ImageStar HD…  In the Network window, click the Local Name of the required device.  Click the Network menu and choos...

[Page 49] Electrosonic ImageStar HD

IMAGESTAR HD USER GUIDE Section 3: Configuration I460GB issue 4 Page 49 Using the Identify Function The Identify function causes the red source LEDs on the front of the ImageStar HD to flash briefly. In a multi-processor system this can...

[Page 50] Electrosonic ImageStar HD

Section 3: Configuration IMAGESTAR HD USER GUIDE Page 50 I460GB issue 4 Setting-up the Source Inputs  In the ImageStar HD Devices window, choose the required settings for one or more inputs, using the drop-down boxes: Typicall...

[Page 51] Electrosonic ImageStar HD

IMAGESTAR HD USER GUIDE Section 3: Configuration I460GB issue 4 Page 51 Setting-up the Display Outputs Setting the Output Mode Setting the Output Mode determines the signal type that the ImageStar HD outputs to the display devices. It a...

[Page 52] Electrosonic ImageStar HD

Section 3: Configuration IMAGESTAR HD USER GUIDE Page 52 I460GB issue 4 Adding Screens to the Wall Layout The Wall Layout provides a representation of the target display. One screen is required for each display device in the target display...

[Page 53] Electrosonic ImageStar HD

IMAGESTAR HD USER GUIDE Section 3: Configuration I460GB issue 4 Page 53 Add a Clip A clip defines the area or window that the source input occupies on the target display. For example, if your target display is arrange as 2x2 screens, typic...

[Page 54] Electrosonic ImageStar HD

Section 3: Configuration IMAGESTAR HD USER GUIDE Page 54 I460GB issue 4 Assign Screens to ImageStar Outputs Each screen in the Wall Layout must be assigned to one of the ImageStar HD outputs.  Click on the Wall Layout window. �...

[Page 55] Electrosonic ImageStar HD

IMAGESTAR HD USER GUIDE Section 3: Configuration I460GB issue 4 Page 55 Assign an ImageStar to a Clip Each clip in the Wall Layout needs to be assigned to one of the ImageStar HD devices, to allow the clip to show an input source. �...

[Page 56] Electrosonic ImageStar HD

Section 3: Configuration IMAGESTAR HD USER GUIDE Page 56 I460GB issue 4 Assign Screens to a Clip Each screen in the Wall Layout needs to be assigned to a clip, to allow it to display the corresponding portion of the clip.  Click on ...

[Page 57] Electrosonic ImageStar HD

IMAGESTAR HD USER GUIDE Section 3: Configuration I460GB issue 4 Page 57 Updating an ImageStar HD (Input/Output Settings) Any changes that you make to the network settings in ImageStar HD Configuration are not automatically sent to the a...

[Page 58] Electrosonic ImageStar HD

Section 3: Configuration IMAGESTAR HD USER GUIDE Page 58 I460GB issue 4 To update the Input/Output Settings of an ImageStar HD…  In the ImageStar HD Devices window click on the ImageStar icon to highlight it (thick red outline): ...

[Page 59] Electrosonic ImageStar HD

IMAGESTAR HD USER GUIDE Section 3: Configuration I460GB issue 4 Page 59 Fine-tuning the ImageStar HD (Interactive Settings) ImageStar HD Configuration allows various settings to be adjusted or fine-tuned while connected to an ImageStar H...

[Page 60] Electrosonic ImageStar HD

Section 3: Configuration IMAGESTAR HD USER GUIDE Page 60 I460GB issue 4 Setting the Correct Overscan  Ensure that the ImageStar HD is currently connected (see page 57).  Click on the Wall Layout window to highlight it.  ...

[Page 61] Electrosonic ImageStar HD

IMAGESTAR HD USER GUIDE Section 3: Configuration I460GB issue 4 Page 61 Adjusting Screen Offsets  Ensure that the ImageStar HD is currently connected (see page 57).  In the ImageStar HD Devices window click on the ImageStar ico...

[Page 62] Electrosonic ImageStar HD

Section 3: Configuration IMAGESTAR HD USER GUIDE Page 62 I460GB issue 4 Restoring Default Settings An ImageStar HD can be returned to its default factory setup by using the Set Defaults function. All current settings will be lost. The...

[Page 63] Electrosonic ImageStar HD

IMAGESTAR HD USER GUIDE Section 4: Technical Data I460GB issue 4 Page 63 SECTION SECTIONSECTION SECTION 4 44 4: :: : Technical Data ...

[Page 64] Electrosonic ImageStar HD

Section 4: Technical Data IMAGESTAR HD USER GUIDE Page 64 I460GB issue 4 Mechanical Data Overall Dimensions: Width: 293mm (11.55 inches) Depth: 185mm (7.30 inches) [including rear sockets] Height: 44mm (1.75 inches) [excluding r...

[Page 65] Electrosonic ImageStar HD

IMAGESTAR HD USER GUIDE Section 4: Technical Data I460GB issue 4 Page 65 Control Inputs/Outputs USB Connector Function: Downloading new firmware. Connector Type: USB type ‘B’ Socket. Pin-out Details: (view into socke...

[Page 66] Electrosonic ImageStar HD

Section 4: Technical Data IMAGESTAR HD USER GUIDE Page 66 I460GB issue 4 Source Inputs RGB Inputs Function: Two connectors labeled as 1 and 2, allowing up to two analog component video/graphics sources to be connected. Connector Ty...

[Page 67] Electrosonic ImageStar HD

IMAGESTAR HD USER GUIDE Section 4: Technical Data I460GB issue 4 Page 67 Display Outputs Function: Final scaled analog or digital output to the target display, labeled OUTPUT 1, 2, 3 and 4. Up to four display devices are supported, ...

[Page 68] Electrosonic ImageStar HD

Section 4: Technical Data IMAGESTAR HD USER GUIDE Page 68 I460GB issue 4 Signal Type: DVI-1.0 or Analog RGB. RGB Levels: Video: 0.7V ±1% into 75Ω; Sync: 2.4V into 2K2. RGB Sync: RBGHV (H & V TTL sync). Pixel Clock: ...

[Page 69] Electrosonic ImageStar HD

IMAGESTAR HD USER GUIDE Appendix A: Control Protocol I460GB issue 4 Page 69 APPENDIX A: APPENDIX A:APPENDIX A: APPENDIX A: Control Protocol ...

[Page 70] Electrosonic ImageStar HD

Appendix A: Control Protocol IMAGESTAR HD USER GUIDE Page 70 I460GB issue 4 Command Summary Setup and control commands for ImageStar HD fall broadly into three categories, according to their function and/or place within the signal proces...

[Page 71] Electrosonic ImageStar HD

IMAGESTAR HD USER GUIDE Appendix A: Control Protocol I460GB issue 4 Page 71 Command String Format The format of each command string comprises the command name (e.g. SetAutoDet) followed by six user-definable values or arguments: <c...

[Page 72] Electrosonic ImageStar HD

Appendix A: Control Protocol IMAGESTAR HD USER GUIDE Page 72 I460GB issue 4 Sending Commands to ImageStar HD The recommended method of sending commands to ImageStar HD is to use HyperTerminal™. HyperTerminal is a terminal emulation pro...

[Page 73] Electrosonic ImageStar HD

IMAGESTAR HD USER GUIDE Appendix A: Control Protocol I460GB issue 4 Page 73 Preparing HyperTerminal  Start HyperTerminal – Start | All Programs | Accessories | Communications | HyperTerminal. The following dialog will appear: ...

[Page 74] Electrosonic ImageStar HD

Appendix A: Control Protocol IMAGESTAR HD USER GUIDE Page 74 I460GB issue 4 If the connection fails for any reason the status bar will show ‘Disconnected’ and a warning message will appear, e.g.: If this occurs check the cable co...

[Page 75] Electrosonic ImageStar HD

IMAGESTAR HD USER GUIDE Appendix A: Control Protocol I460GB issue 4 Page 75 Sending a Command File NOTE: Before following this procedure you need to have created one or more command files. See ‘Creating a Command File’ on page 72...

[Page 76] Electrosonic ImageStar HD

Appendix A: Control Protocol IMAGESTAR HD USER GUIDE Page 76 I460GB issue 4 Device Setup Commands IPADDSet Function Sets the IP Address of the device. NOTE: The new address is not saved until the SaveNetwork command is issued. Th...

[Page 77] Electrosonic ImageStar HD

IMAGESTAR HD USER GUIDE Appendix A: Control Protocol I460GB issue 4 Page 77 SaveNetwork Function Commits new network settings (using IPADDSet, MASKSet and GatewaySet) to the ImageStar HD flash memory. NOTE: The device must be reboote...

[Page 78] Electrosonic ImageStar HD

Appendix A: Control Protocol IMAGESTAR HD USER GUIDE Page 78 I460GB issue 4 Input Setup Commands SetAutoDet Function Enables Auto Detect mode on a specified input or, if already in this mode, forces the source to be re-detected. For...

[Page 79] Electrosonic ImageStar HD

IMAGESTAR HD USER GUIDE Appendix A: Control Protocol I460GB issue 4 Page 79 SetIpMode Function Disables Auto Detect mode on a specified input and configures it for a predefined source type. Format SetIpMode=<channel>,<mode nu...

[Page 80] Electrosonic ImageStar HD

Appendix A: Control Protocol IMAGESTAR HD USER GUIDE Page 80 I460GB issue 4 SetIpMode – RGB Mode Numbers (where <channel> = 0 or 1) 0 = VGA 60Hz [640x480] DMT 1 = VGA 60Hz [640x480] GTF 2 = VGA 60Hz [640x480] CVT 3 = VGA 72...

[Page 81] Electrosonic ImageStar HD

IMAGESTAR HD USER GUIDE Appendix A: Control Protocol I460GB issue 4 Page 81 SetIpModeCurrent Function Retains the current configuration and disables Auto Detect for the specified input. Format SetIpModeCurrent=<channel>,<color...

[Page 82] Electrosonic ImageStar HD

Appendix A: Control Protocol IMAGESTAR HD USER GUIDE Page 82 I460GB issue 4 SetViewport Function Adjusts the viewport for the specified source. NOTE: A minimum viewport of 95% is always applied to video sources to remove unwanted bla...

[Page 83] Electrosonic ImageStar HD

IMAGESTAR HD USER GUIDE Appendix A: Control Protocol I460GB issue 4 Page 83 SetAdjust Function Adjusts the contrast, brightness, clocking or positioning of the specified source (applies to RGB Inputs 1 & 2 only) Format SetAdjust...

[Page 84] Electrosonic ImageStar HD

Appendix A: Control Protocol IMAGESTAR HD USER GUIDE Page 84 I460GB issue 4 Source Processing Commands SetClip Function Specifies the source to be placed on the target display and sets the magnification to be applied. Format SetCli...

[Page 85] Electrosonic ImageStar HD

IMAGESTAR HD USER GUIDE Appendix A: Control Protocol I460GB issue 4 Page 85 Output Setup Commands SetOpMode Function Sets the output format for all four output channels. Format SetOpMode=<mode number>,<genlock mode>,0,0,...

[Page 86] Electrosonic ImageStar HD

Appendix A: Control Protocol IMAGESTAR HD USER GUIDE Page 86 I460GB issue 4 SetOscan Function Sets the overscan or underscan factor required by the display devices. Format SetOscan=<horizontal overscan>,<vertical overscan>,...

[Page 87] Electrosonic ImageStar HD

IMAGESTAR HD USER GUIDE Appendix A: Control Protocol I460GB issue 4 Page 87 SetMap Function Defines the region of the magnified image to be displayed by a specified output. Format SetMap=<output number>,<top left horizontal po...

[Page 88] Electrosonic ImageStar HD

Appendix A: Control Protocol IMAGESTAR HD USER GUIDE Page 88 I460GB issue 4 SetOffset Function Applies a position offset to the image on a specified output, to allow correct stitching of the target display screens. Format SetOffset=&l...

[Page 89] Electrosonic ImageStar HD

...

[Page 90] Electrosonic ImageStar HD

Copyright © 2008 ELECTROSONIC Ltd All rights reserved Part No. I460GB issue 4 ELECTROSONIC UK - London Sweden - USA - Minneapolis USA - Los Angeles USA - New York USA - Orlando Hong Kong Web Site: Hawley Mill, Hawley Road, Dartford, Kent. ...