GeoVision GV-BX110D Quick Start Manual

Download or browse on-line these Quick Start Manual for GeoVision GV-BX110D Digital Camera, IP Camera.

GeoVision GV-BX110D Manual Information:

This manual for GeoVision GV-BX110D, given in the PDF format, is available for free online viewing and download without logging on. The guide contains 130 pages, and the size of the file at download is . The document type is Quick Start Manual.

Download Manual

This sample of GeoVision GV-BX110D Manual is aimed at the following devices list: GV-BX110D, GV-BX130D-0, GV-BX320D-0, GV-VD120D, GV-BL120D

More Manuals:

In case you failed to obtain relevant information in this document, please, look through related operating manuals and user instructions for GeoVision GV-BX110D. Just click one of the links below to go to the selected manual:

Summary of Contents:

[Page 1] GeoVision GV-BX110D

Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use. Quick Start Guide GV-IP Camera H.264 ...

[Page 2] GeoVision GV-BX110D

© 2012 GeoVision, Inc. All rights reserved. Under the copyright laws, this manual may not be copied, in whole or in part, without the written consent of GeoVision. Every effort has been made to ensure that the information in t...

[Page 3] GeoVision GV-BX110D

i Safety Notice For GV-CBW120 and GV-CBW220: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any inte...

[Page 4] GeoVision GV-BX110D

ii Contents Introduction ..................................................................................v Options .........................................................................................x Note for Connecting to GV-System ....

[Page 5] GeoVision GV-BX110D

iii 4.3.3 Inserting the Sun-Shield Cover..........................................45 4.4 Connecting the Camera ............................................................ 46 4.4.1 Wire Definition ....................................................

[Page 6] GeoVision GV-BX110D

iv 9.2 Accessing the Live View ........................................................... 90 9.2.1 Checking the Dynamic IP Address ....................................91 9.2.2 Configuring the IP Address...........................................

[Page 7] GeoVision GV-BX110D

v Introduction Welcome to the GV-IPCam H.264 Quick Start Guide. In this quick guide, you will find information on the installation and basic configurations of the Box Camera, IR Arctic Box Camera, Mini Fixed Dome, Mini Fixed Rugged Dome, Bullet...

[Page 8] GeoVision GV-BX110D

vi Camera Model No. Description GV-BX220D-2 2 MP, H.264 D/N, Auto Iris, f: 2.8 ~ 6 mm, F/1.3, 1/3’’ CS Lens GV-BX220D-3 2 MP, H.264 D/N, Auto Iris, f: 2.8 ~ 12 mm, F/1.4, 1/3’’ CS Lens GV-BX320D-0 3 MP, H.264 D/N, Au...

[Page 9] GeoVision GV-BX110D

vii Camera Model No. Description GV-MFD110 1.3 MP H.264, Color, Fixed Iris GV-MFD120 1.3 MP, H.264, Low Lux Color, Fixed Iris GV-MFD130 1.3 MP, H.264, Color, Fixed Iris GV-MFD220 2 MP, H.264, Color, Fixed Iris GV-MFD320 3 MP, H.26...

[Page 10] GeoVision GV-BX110D

viii Camera Model No. Description GV-VD120D (IK10+, Transparent Cover) GV-VD121D (IK10+, Smoked Cover) GV-VD122D (IK7, Transparent Cover) GV-VD123D (IK7, Smoked Cover) 1.3 MP H.264, Low Lux, Auto Iris GV-VD220D (IK10+, Transpare...

[Page 11] GeoVision GV-BX110D

ix Camera Model No. Description GV-CB120 1.3 MP H.264, Fixed Iris GV-CB220 2 MP H.264, Fixed Iris GV-CBW120 1.3 MP H.264, Wireless Fixed Iris Cube Camera GV-CBW220 Fixed Lens 2 MP H.264, Wireless Fixed Iris GV-CA120 1....

[Page 12] GeoVision GV-BX110D

x Options Optional devices can expand your camera’s capabilities and versatility. Contact your dealer for more information. Device Description GV-IR LED A mountable infrared LED device that improves image performance of Box Cameras un...

[Page 13] GeoVision GV-BX110D

xi Note for Connecting to GV-System The GV-IPCAM H.264 is designed to work with GV-System, a hybrid or digital video management system. Note the following when GV-IPCAM H.264 is connected to GV-System: 1. By default, the images are recorded ...

[Page 14] GeoVision GV-BX110D

xii Note for Adjusting Focus and Zoom When adjusting the Focus and Zoom Screws (on Box Camera, IR Arctic Box Camera, Mini Fixed Dome, Bullet Camera, Vandal Proof IP Dome and Fixed IP Camera), please do not over tighten the Focus and Zoom s...

[Page 15] GeoVision GV-BX110D

xiii Note for Installing Camera Outdoor When installing the IR Arctic Box Camera, Bullet Camera, Vandal Proof IP Dome or Mini Fixed Rugged Dome outdoor, be sure that: 1. The camera is set up above the junction box to prevent water from ent...

[Page 16] GeoVision GV-BX110D

xiv 3. After opening the camera cover, ensure the screws are tightened and the cover is in place. 4. To prevent the lens from fogging up, ensure to replace the silica gel bag every time you open the camera, and conceal the gel bag in cam...

[Page 17] GeoVision GV-BX110D

1. Box Camera 1.1 Packing List • Box Camera • Terminal Block • Fixed Focal or Varifocal Megapixel Lens • Pin Wrench (for GV-BX110D only) • C-mount Lens Adapter (for GV-BX110D only) • Six Lens Rings (not available for GV-BX1...

[Page 18] GeoVision GV-BX110D

2 1.2 Overview GV-BX110D 1 2 4 5 7 3 6 8 9 10 99 11 12 13 Note: The Zoom Screw and Auto Iris Connector are only available in the varifocal model. ...

[Page 19] GeoVision GV-BX110D

Box Camera 3 1 No. Name Description 1 Audio Out Connects a speaker for audio output. 2 Audio In Connects a microphone for audio input. 3 Default Resets all configurations to factory default. See 12. Restoring to Default Set...

[Page 20] GeoVision GV-BX110D

4 GV-BX120D / 130D Series / 140DW / 220D Series / 320D Series / 520D-0 1 2 3 4 5 6 7 8 9 10 12 13 14 16 15 11 Note: 1. The Light Sensor is only available in GV-BX140DW. Keep the Light sensor unobscured for accurate light detection. ...

[Page 21] GeoVision GV-BX110D

Box Camera 5 1 No. Name Description 7 Auto Iris Connector Plug the iris control cable to the connector. Note that Auto Iris Connector is not functional in GV-BX130D-1, GV-BX140DW and GV-BX520D-0. 8 DC 12V Port Connects to power. ...

[Page 22] GeoVision GV-BX110D

6 1.3 Accessory Installation 1.3.1 C-Mount Lenses When you use a C-mount lens, it requires a certain distance from the camera’s imaging chip to focus the lens. Mount the supplied C-mount lens adapter / lens ring to the camera, and then att...

[Page 23] GeoVision GV-BX110D

Box Camera 7 1 Box Camera (except GV-BX110D) Three type of lens rings are provided for Box Camera (except GV-BX110D): • 0.188 mm (transparent color) x 2 • 0.125 mm (black color with a glossy surface) x 2 • 0.254 mm (black color with...

[Page 24] GeoVision GV-BX110D

8 1.3.2 Infrared Illuminators (GV-IR LED / GV-IR LED T2) 1. Connect the infrared illuminator to the terminal block on the camera. See I/O Terminal Block, Box Camera Chapter, GV-IPCam H.264 User’s Manua l on the software CD, or GV-IR LED U...

[Page 25] GeoVision GV-BX110D

Box Camera 9 1 GV-IR LED T2 4. Click Apply. For Trigger by Input and Trigger IR by D/N functions, see the Video Settings section , Administrator Mode Chapter in the GV-IPCam H.264 User’s Manual in the software CD. ...

[Page 26] GeoVision GV-BX110D

10 1.4 Connecting the Camera The Box Camera is designed for indoor use. Please make sure the installing site is shielded from rain and moisture. GV-BX110D ...

[Page 27] GeoVision GV-BX110D

Box Camera 11 1 1. If you are using the auto iris model, plug the iris control cable to the Auto Iris Connector on the camera. 2. Use a standard network cable to connect the camera to your network. 3. Optionally connect a speaker and an exte...

[Page 28] GeoVision GV-BX110D

12 GV-BX120D / 130D Series / 140DW / 220D Series / 320D Series / 520D-0 1. If you are using the auto iris model, plug the iris control cable to the Auto Iris Connector on the camera. 2. Use a standard network cable to connect the camer...

[Page 29] GeoVision GV-BX110D

Box Camera 13 1 6. Connect power using one of the following methods: • Plug the supplied power adapter to the power port. • Use the Power over Ethernet (PoE) function and the power will be provided over the network cable. 7. The stat...

[Page 30] GeoVision GV-BX110D

14 ...

[Page 31] GeoVision GV-BX110D

2. IR Arctic Box Camera 2.1 Packing List • IR Arctic Box Camera • Screw Anchor x 4 • Screw x 4 • Washer x 4 • Big Torx Wrench • Small Torx Wrench • Silica Gel Bag x 2 • Sticker x 2 • GV-PA481 • GV-PA48...

[Page 32] GeoVision GV-BX110D

16 2.2 Overview 1 2 3 4 5 7 6 Note: The Iris Screw (no. 7) is only available in GV-BX520D-E. No. Name Description 1 Silica gel bag Desiccant that keeps the camera housing dry. 2 IR power plug Supplies power to the built-in IR...

[Page 33] GeoVision GV-BX110D

IR Arctic Box Camera 17 2 2.3 Installation The IR Arctic Box Camera is designed for outdoor use. 1. Mark the installation site and drill four holes for screw anchors. 2. Insert the supplied screw anchors. 3. Secure the camera to the wall...

[Page 34] GeoVision GV-BX110D

18 Tilt Adjustment Pan Adjustment 7. Based on the live view, adjust the image clarity using the GV-IP Device Utility program. For details, see 9.3 Adjusting Image Clarity in the Quick Start Guide. Unscrew the cover with the supplied ...

[Page 35] GeoVision GV-BX110D

IR Arctic Box Camera 19 2 Hold the connectors and unplug them. Important: Unscrew and remove the cover carefully. Pulling the cover off may cause damages to the inner wiring of the camera. Adjust the focus, zoom and iris screws. Focus s...

[Page 36] GeoVision GV-BX110D

20 8. Replace the silica gel bag. Paste the sticker to the front side of the silica gel bag. Press the sticker several times to make sure it adheres properly and paste the silica gel bag to the indicated place. Important: 1. Be sure t...

[Page 37] GeoVision GV-BX110D

IR Arctic Box Camera 21 2 2.4 Connecting the Camera 2.4.1 Wire Definition No. Wire Color Definition 1 Black (thick) PoE 2 Black BNC TV out 3 Green RCA Audio Out 4 Pink RCA Audio In Follow the steps below to connect the camer...

[Page 38] GeoVision GV-BX110D

22 3. Connect the camera’s cable to the GV-PA481 PoE adapter as illustrated below. The power and network will be supplied simultaneously. Ethernet Cable PoE GV-BX-E Rear Panel Power Hub/Router POWER & DATA OUT DATA IN 4. The status ...

[Page 39] GeoVision GV-BX110D

3. Mini Fixed Dome & Mini Fixed Rugged Dome 3.1 Packing List • Mini Fixed Dome or Mini Fixed Rugged Dome • Torx Wrench • Self Tapping Screw x 2 • Screw Anchor x 2 • Cable Stopper x 1 • Installation Sticker (for GV-MDR s...

[Page 40] GeoVision GV-BX110D

24 3.2 Overview GV-MFD110 321 4 5 7 6 No. Name Description 1 Default Button Resets the GV-MFD110 to factory default. See 12. Restoring to Default Settings later in the Quick Start Guide. 2 Lens Rotates the les right/left t...

[Page 41] GeoVision GV-BX110D

Mini Fixed & Rugged Dome 25 3 GV-MFD120 / 130 / 220 / 320 / 520 1 2 3 4 5 7 6 No. Name Description 1 Default Button Resets the camera to factory default. See 12. Restoring to Default Settings later in the Quick Start Gui...

[Page 42] GeoVision GV-BX110D

26 LED Indicator LED Name Description 1. Link Turns only when the network is connected. 2. ACT Turns on when data are being transmitted. 3. PWR Turns on when power is on. 4. SW RDY (Status) Turns on when the system is ready. GV-M...

[Page 43] GeoVision GV-BX110D

Mini Fixed & Rugged Dome 27 3 No. Name Description 1 Silica gel bag Absorbs the moisture inside the camera. 2 Conceal paper Prevents water or moisture from entering the camera. 3 Lens Receives image inputs. 4 Rotation Disc...

[Page 44] GeoVision GV-BX110D

28 3.3 Installation To install a Mini Fixed Dome, make sure the installing site is shielded from rain and moisture. GV-MFD Series 1. Unscrew the housing cover using the supplied torx wrench. 2. Put the camera on the desired location a...

[Page 45] GeoVision GV-BX110D

Mini Fixed & Rugged Dome 29 3 Tilt Adjustment 8. For GV-MFD110, adjust image clarity using the GV-IP Device Utility program. For details, see 9.3 Adjusting Image Clarity in the Quick Start Guide. 9. Except for GV-MFD110, insert a mem...

[Page 46] GeoVision GV-BX110D

30 GV-MDR Series 1. Paste the installation sticker on the desired location. The arrow should point toward the direction that the camera faces. 2. Drill one hole on each of the two curves for screw anchors. Drill the circle (30 mm in diamet...

[Page 47] GeoVision GV-BX110D

Mini Fixed & Rugged Dome 31 3 8. Adjust the angles based on the live view. Pan Adjustment Tilt Adjustment Rotational Adjustment ...

[Page 48] GeoVision GV-BX110D

32 9. Insert a memory card into the memory card slot. 10. Secure the housing cover using the supplied torx wrench. 11. Optionally conceal the cable opening with the supplied cable stopper. Cable stopper ...

[Page 49] GeoVision GV-BX110D

Mini Fixed & Rugged Dome 33 3 3.4 Connecting the Camera Refer to the wire definition and illustrations below to connect the power and network. 3.4.1 Wire Definition GV-MFD120 / 130 / 220 / 320 / 520 The data cable provides connections...

[Page 50] GeoVision GV-BX110D

34 3.4.2 Power and Network Connection For GV-MFD120 / 130 / 220 / 320 / 520, there are two ways to supply power to the camera: • Use a Power over Ethernet (PoE) adapter to connect the camera to the network, and the power will be provided ...

[Page 51] GeoVision GV-BX110D

Mini Fixed & Rugged Dome 35 3 3.4.3 Vehicle Installation To install the Mini Fixed Rugged Dome on a vehicle, clip the ferrite core to the camera cable. The ferrite core must be attached as close as possible to the camera with the maximum ...

[Page 52] GeoVision GV-BX110D

36 ...

[Page 53] GeoVision GV-BX110D

4. Bullet Camera 4.1 Packing List • Bullet Camera • Lens (Megapixel and Built-In 16 IR LEDs) • Self Tapping Screw x 3 • Plastic Screw Anchor x 3 • Torx Wrench x 2 • Sun-Shield Cover Kit (1 Sun-Shield Cover, 2 Philips He...

[Page 54] GeoVision GV-BX110D

38 4.2 Overview 1 2 3 4 No. Name Description 1 Memory Card Slot Receives a Micro SD / SDHC / SDXC memory card. 2 Zoom Screw Holds the zoom lens in place. 3 Focus Screw Holds the focus lens in place 4 Default Button Resets al...

[Page 55] GeoVision GV-BX110D

Bullet Camera 39 4 4.3 Installation The Bullet Camera is designed for outdoor use and can be mounted on ceiling and wall. 1. Slide the cable clamp to the camera base. Cable Clamp 2. Install the Bullet Camera to the wall / ceiling. 3. ...

[Page 56] GeoVision GV-BX110D

40 7. Loosen the camera’s cover, adjust the lens and focus, and insert a memory card into the memory card slot. See 4.3.2 Adjusting Lens and Inserting a Memory Card in the Quick Start Guide. 8. Fasten the camera’s cover. 9. Install th...

[Page 57] GeoVision GV-BX110D

Bullet Camera 41 4 2. Adjust the angle of camera body to the right or the left, and fasten the panning lock screw. 0 ~ 360° Second Shaft You can adjust the camera body up and down by 90, 112.5, 135, 157.5 or 180 degrees by using the ge...

[Page 58] GeoVision GV-BX110D

42 3. Adjust the angle of camera body to 90, 112.5, 135, 157.5 or 180 degrees. Then move the camera base to the left to combine the gears. 90° 112.5° 180 ° 157.5° 135° 4. Fasten the tilting lock screw. Third Shaft You can ad...

[Page 59] GeoVision GV-BX110D

Bullet Camera 43 4 2. Adjust the angle of camera base, and fasten the base fixing screw. 0~360° 4.3.2 Adjusting Lens and Inserting a Memory Card To adjust the camera’s lens to produce a clear image and insert a memory card into the SD c...

[Page 60] GeoVision GV-BX110D

44 3. Adjust for image clarity using GV-IP Device Utility. For details, see 9.3 Adjusting Image Clarity in the Quick Start Guide. 4. If you want to insert a memory card, follow the steps below. A. Loosen the fixing screw. B. Slightly p...

[Page 61] GeoVision GV-BX110D

Bullet Camera 45 4 4.3.3 Inserting the Sun-Shield Cover After setting up the Bullet Camera, now you can install the sun-shield cover to the camera. 1. Fasten the hexagon screws either on top or below the camera. Hexagon Screws 2. Put t...

[Page 62] GeoVision GV-BX110D

46 4.4 Connecting the Camera Connect your Bullet Camera to power, network and the cables needed. 4.4.1 Wire Definition The cable of the Bullet Camera is illustrated and defined below: Ethernet (PoE) Digital In (Red) DC 12V+ / AC 24V + ...

[Page 63] GeoVision GV-BX110D

Bullet Camera 47 4 4.4.2 Connecting the Power Cable There are two ways to supply power to the Bullet Camera: • Use a Power over Ethernet (PoE) adapter to connect the camera to the network, and the power will be provided at the same time. ...

[Page 64] GeoVision GV-BX110D

48 ...

[Page 65] GeoVision GV-BX110D

5. Vandal Proof IP Dome 5.1 Packing List • Vandal Proof IP Dome • Silica Gel Bag x 2 • Screw Anchor x 4 • Torx Wrench x 1 • Ceiling Screw x 4 • Blue Screw x 3 • T-Cap Screw x 3 • Small Scr...

[Page 66] GeoVision GV-BX110D

50 • 2-Pin / 3-Pin Terminal Block • GV-IPCam H.264 Software CD • GV-IPCAM H.264 Quick Start Guide • GV-NVR Software DVD • GV-NVR Quick Start Guide Note: Focus Adjustment Cap is only needed and supplied for IK10+ models...

[Page 67] GeoVision GV-BX110D

Vandal Proof IP Dome 51 5 5.2 Overview 2 3 4 5 1 6 7 8 9 7 10 11 No. Name Description 1 Power LED Turns on (green) when the power is on and turns off when there is no power supply. 2 Status LED Turns on (green) when the system oper...

[Page 68] GeoVision GV-BX110D

52 5.3 Installation The Vandal Proof IP Dome is designed for outdoors. With the standard packing, there are two ways to install the Vandal Proof IP Dome: hard-ceiling mount and in-ceiling mount. 5.3.1 Hard-Ceiling Mount 1. Unpack th...

[Page 69] GeoVision GV-BX110D

Vandal Proof IP Dome 53 5 Unscrew thread lock Unscrew the inner housing Take out the camera body ...

[Page 70] GeoVision GV-BX110D

54 2. Mark the position of four screw holes on the desired installation location, and drill holes in the marked locations. Drill the ellipse part if you wish to put the wires through it. 3. Insert the screw anchors to the 4 holes on the c...

[Page 71] GeoVision GV-BX110D

Vandal Proof IP Dome 55 5 8. Access the live view. See 9.2. Accessing the Live View in the Quick Start Guide. 9. Adjust the camera to a desired angle as illustrated below. Tip: The 3-axis mechanism offers flexible and easy installation. ...

[Page 72] GeoVision GV-BX110D

56 Rotational Adjustment 10. Hold the focus adjustment cap on top of the camera view and adjust for image clarity using the GV-IP Device Utility program. For details, see 9.3 Adjusting Image Clarity in the Quick Start Guide. Focus Scre...

[Page 73] GeoVision GV-BX110D

Vandal Proof IP Dome 57 5 IMPORTANT: 1. To prevent the lens from fogging up, you must replace the silica gel bag every time you open the camera. The gel bag loses its effectiveness when the dry camera is opened. 2. Make sure the housing co...

[Page 74] GeoVision GV-BX110D

58 4. Screw in a plastic clip to the blue screw, hold it with one hand and use a screw driver to rotate the blue screw until the plastic clip moves half way down. Plastic Clip 5. Secure a T-cap on top of the blue screw with a small screw ...

[Page 75] GeoVision GV-BX110D

Vandal Proof IP Dome 59 5 7. Insert the camera to the ceiling with the plastic screws moved inward. 8. Move the blue screws out and rotate the blue screw with a screw driver until the plastic clip and the bottom of the camera body clamps th...

[Page 76] GeoVision GV-BX110D

60 5.4 Connecting the Camera Connect your Vandal Proof IP Dome to power, network and other cables. 5.4.1 Wire Definition The cables for Vandal Proof IP Dome are illustrated and defined below. Ethernet (PoE) TV out Audio out (green) Aud...

[Page 77] GeoVision GV-BX110D

Vandal Proof IP Dome 61 5 5.4.2 Connecting the Power Cable There are two ways to supply power to the camera: • Use a Power over Ethernet (PoE) adapter to connect the camera to the network, and the power will be provided at the same time. �...

[Page 78] GeoVision GV-BX110D

62 ...

[Page 79] GeoVision GV-BX110D

6. Fixed IP Dome 6.1 Packing List 6.1.1 Packing List for Hard-Ceiling Mount • Fixed IP Dome • Torx Wrench x 1 • Mounting Plate x 1 • Short Screw Anchor x 3 • Ceiling Screw x 3 • Plate Screw x 3 • TV-out ...

[Page 80] GeoVision GV-BX110D

64 6.1.2 Packing List for In-Ceiling Mount • In-Ceiling Housing Cover • Mounting Plate x 1 • Mounting Bracket x 3 • Copper Pillar x 3 • Copper Pillar Screw x 6 • Bracket Screw x 3 • Thread Lock Screw x 1 ...

[Page 81] GeoVision GV-BX110D

Fixed IP Dome 65 6 6.2 Overview 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 No. Name Description 1 Focus Screw Adjusts the focus of the camera. 2 Zoom Screw Adjusts the zoom of the camera. 3 Rotational Screw Loosens to adjust the camera ...

[Page 82] GeoVision GV-BX110D

66 No. Name Description 12 I/O Terminal Block Connects I/O devices. For details, see Fixed IP Dome Chapter in the GV-IPCam H.264 User’s Manual on the software CD. 13 DC 12V Port Connects to power. 14 Status LED Turns on (green)...

[Page 83] GeoVision GV-BX110D

Fixed IP Dome 67 6 6.3 Installation The Fixed IP Camera is designed for indoors. With the standard packing, there are three ways to install the Fixed IP Camera: hard-ceiling mount, in-ceiling mount and wall-surface mount. 6.3.1 Hard-Ceiling ...

[Page 84] GeoVision GV-BX110D

68 Take out the camera body 3. Secure the camera body and the mounting plate to the ceiling with the three ceiling screws. Ceiling mounting plate 4. Connect the network and power cables to the camera. See 6.4 Connecting the Camera in ...

[Page 85] GeoVision GV-BX110D

Fixed IP Dome 69 6 6. Adjust the camera to a desired angle as illustrated below. Tip: The 3-axis mechanism offers flexible and easy ceiling / wall installation. Pan Adjustment Tilt Adjustment ...

[Page 86] GeoVision GV-BX110D

70 Rotational Adjustment 7. Adjust for image clarity using the GV-IP Device Utility program. For details, see 9.3 Adjusting Image Clarity in the Quick Start Guide. Focus Screw Zoom Screw 8. Secure the housing cover as shown in step...

[Page 87] GeoVision GV-BX110D

Fixed IP Dome 71 6 6.3.2 In-Ceiling Mount 1. Follow step 2 in the Hard-Ceiling Mount section to remove the housing cover and take out the camera body. 2. Paste the supplied sticker onto a desired location on the ceiling and cut a circle on...

[Page 88] GeoVision GV-BX110D

72 5. Place the 3 mounting brackets at the indent next to the copper pillars (labeled as 2 on the mounting plate) and secure them using the 3 bracket screws. 6. Place the mounting plate on the camera body with the copper pillars insert...

[Page 89] GeoVision GV-BX110D

Fixed IP Dome 73 6 9. On the back side, make sure the black plastic clips are slightly above the ceiling board and pointing outward. Back Side Front Side 10. Tighten the bracket screws from the front side of the camera. 11. Connect the n...

[Page 90] GeoVision GV-BX110D

74 15. Place the housing cover on the camera body with the GeoVision logo pointing toward the front of the camera. 6.3.3 Wall-Surface Mount 1. Follow step 2 in the Hard-Ceiling Mount section to remove the housing cover and take out t...

[Page 91] GeoVision GV-BX110D

Fixed IP Dome 75 6 3. Insert the short screw anchors and secure the camera and the mounting plate with three plate screws. 4. Connect the network and power cables to the camera. See 6.4 Connecting the Camera in the Quick Start Guide. 5. A...

[Page 92] GeoVision GV-BX110D

76 6.4 Connecting the Camera 3 3 2 2 1 5 4 1. Use a standard network cable to connect the camera to your network. 2. Optionally connect a speaker and an external microphone. 3. Optionally connect a monitor using a Video Out wire. Enable ...

[Page 93] GeoVision GV-BX110D

7. Cube Camera 7.1 Packing List • Cube Camera • Supporting Rack • Screw x 3 • Screw Anchor x 3 • DC 5V or DC 12V Power Adapter (for GV-CB120 / 220) • DC 5V Power Adapter (for GV-CBW120 / 220) • ...

[Page 94] GeoVision GV-BX110D

78 7.2 Overview No. Name Description 1 Microphone Receives sounds. 2 Speaker Plays sounds. 3 LAN Connects to a 10/100 Ethernet. 4 Status LED Turns red when the system powers on. Turns orange when the system is ready. 5 LAN LE...

[Page 95] GeoVision GV-BX110D

Cube Camera 79 7 7.3 Installation Follow the steps below to install, connect to and adjust your Cube Camera. 1. Put the supporting rack on the desired location and make marks for screw anchors. 2. Drill the marks and insert the screw anc...

[Page 96] GeoVision GV-BX110D

80 7. Adjust the angles of the camera based on live view and fasten the indicated screw. 8. For GV-CBW120/220, to connect to the Internet through wireless service, follow the steps in 8.2.3 Configuring the Wireless Connection. ...

[Page 97] GeoVision GV-BX110D

Cube Camera 81 7 7.4 Connecting the Camera 1 2 1. Use a standard network cable to connect the camera to your network. 2. Power on using the supplied power adapter. 3. The status LED of the camera will be orange. Then you can set the IP ad...

[Page 98] GeoVision GV-BX110D

82 ...

[Page 99] GeoVision GV-BX110D

8. Advanced Cube Camera 8.1 Packing List • Cube Camera • Supporting Rack • Screw x 3 • Screw Anchor x 3 • DC 5V Power Adapter • GV-IPCam H.264 Software CD • GV-IPCAM H.264 Quick Start Guide • ...

[Page 100] GeoVision GV-BX110D

84 8.2 Overview 1 2 3 4 5 6 7 8 9 10 11 12 No. Name Description 1 Speaker Plays sounds. 2 PIR sensor Passive infrared sensor. 3 Microphone Receives sounds. 4 Alarm LED When the PIR sensor detects the movement, the LED lights u...