Miele PT 7135 C Operating And Installation Instructions

[Page 1] Miele PT 7135 C

Operating and installation instructions for condenser tumble dryer PT 7135 C To avoid the risk of accidents or damage to the machine it is essential to read these instructions before it is installed, commissioned and used for the first time. G M.-Nr....

[Page 2] Miele PT 7135 C

Disposal of the packing material The transport and protective packing has been selected from materials which are environmentally friendly for disposal and can normally be recycled. Ensure that any plastic wrappings, bags etc. are disposed of safely a...

[Page 3] Miele PT 7135 C

Caring for the environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Disposal of the packing material . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Disposal of your old mac...

[Page 4] Miele PT 7135 C

Cleaning and care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Cleaning the fluff filters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Cleaning them...

[Page 5] Miele PT 7135 C

Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 Settings menu J. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 Language J ....

[Page 6] Miele PT 7135 C

To avoid the risk of accidents and damage to the machine please read these instructions carefully before using it for the first time. They contain important information on its safety, installation, use and maintenance. Keep these instructions in a sa...

[Page 7] Miele PT 7135 C

If the connection cable is faulty it must only be replaced with a genuine Miele connection cable. In the event of a fault or for cleaning purposes, the machine is only completely isolated from the electricity supply when: – it is switched off at th...

[Page 8] Miele PT 7135 C

Always keep the area around the machine free of dust and fluff. Dust drawn into the machine can over time cause blockages in the condenser unit. Do not install the machine in a room where there is a risk of frost occurring. At temperatures around fre...

[Page 9] Miele PT 7135 C

For machines with stainless steel surfaces: The stainless steel surfaces must not come into contact with liquid cleaning and disinfecting agents which contain chlorine or sodium hypochlorite. These agents can have a corrosive effect on stainless stee...

[Page 10] Miele PT 7135 C

Control panel a Display See the following pages for more information. b Start button c PC / Optical interface This is used by service technicians to run diagnostic checks on your machine and can also be used to update programming data in the future. ...

[Page 11] Miele PT 7135 C

Displays Entry menu 1 Cottons Programme selection ... 2 Minimum iron Settings F ... 3 Woollens handcare 4 Smoothing 10:00 When the machine is switched on, the entry menu with 4 favourite programmes (factory default settings which can be changed) will...

[Page 12] Miele PT 7135 C

Programme selection menu Programme Back A selection Cottons Minimum iron Woollens handcare H ^ By turning the multi-function selector you can select any programme. The highlighting will move up or down depending on the direction the multi-function se...

[Page 13] Miele PT 7135 C

Before using the machine for the first time ensure that it is correctly installed and connected. See "Installation and connection". Welcome screen When the tumble dryer is switched on for the first time, the welcome screen will appear. The ...

[Page 14] Miele PT 7135 C

Care symbols Before drying check the drying symbol on the care label. If there are no symbols, dry at your own risk! q . . . . . . . . . Dry at normal temperature r . . . . . . . . . . Dry at a low temperature s . . . . . . . . . . . . . . . Do not t...

[Page 15] Miele PT 7135 C

Brief instructions The headings numbered (A, B, C ...) show the operating sequence and can be used as a brief guide to using your machine. A Sort the laundry To ensure an even drying result separate out the washed laundry and sort it according to: . ...

[Page 16] Miele PT 7135 C

C Select a programme You can select a programme either by: – selecting a favourite programme, or – by going into the Programme selection menu. ^ If required, you can then select Low temperature and/or the Timer (Delay start time) from the relevan...

[Page 17] Miele PT 7135 C

Estimated time remaining When a programme is selected the estimated drying time will appear in the display. Please be aware that it is only an estimate! The following factors all affect the estimated time remaining: residual moisture content after sp...

[Page 18] Miele PT 7135 C

You can programme your four most frequently used drying programmes to appear in the left hand side of the display. The Save option must be activated via the Settings / Supervisor level menu before they can be programmed. This must be done by a Miele ...

[Page 19] Miele PT 7135 C

Important: If you do not make a selection in the sub-menu within approx. 20 seconds, the display will revert to the main menu. – Drying levels programme Cottons Normal+ Drying levels from c Machine iron - Extra dry ^ Use the multi-function selecto...

[Page 20] Miele PT 7135 C

Low temperature Cottons Normal+ Low temp. Duration: 1:47 h Low temp. B H Timer Y H Save H Back A H ^ Select Low temperature for all delicate or minimum iron fabrics with the r care label (e.g. acrylic garments). – Delicate fabrics are dried at a lo...

[Page 21] Miele PT 7135 C

The timer can be used to select when you want the programme to end (if this option has been activated by a Miele service technician). The programme start can be delayed to start automatically in 30 minute intervals up to a maximum of 24 hours. To ope...

[Page 22] Miele PT 7135 C

Cottons Max. load: 6.5 kg* Extra dry, Normal+, Normal** Fabric type Single and multi-layered cotton fabrics such as towelling, jerseywear, underwear, flannelette bed linen. Notes – Select Low temperature for fabrics with the r symbol. – Select Ex...

[Page 23] Miele PT 7135 C

Woollens hand care Max. load: 2.5 kg* Fabric type Woollen fabrics. Notes – To refresh and fluff up woollen garments quickly. Woollen fabrics are not dried completely by this programme. – Remove garments as soon as the programme has finished and l...

[Page 24] Miele PT 7135 C

Denim Max. load: 3.5 kg* Normal, Hand iron r Fabric type Denim fabrics, e.g. jeans, jackets, skirts, shirts. Shirts Max. load: 2.5 kg* Normal, Hand iron r Fabric type Shirts and blouses. Outerwear Max. load: 3.5 kg* Normal, Hand iron r Fabric type Ou...

[Page 25] Miele PT 7135 C

Payment system If your machine is fitted with a payment system, opening the door or cancelling the programme after it has started may cause loss of credit*. * A Miele service technician can re-set the payment system so that programming changes can be...

[Page 26] Miele PT 7135 C

Cleaning the fluff filters Fluff from items being dried is collected by the fluff filters in the door and the door opening. Clean the filters after each drying programme*. Cleaning them whilst dry ^ Open the door and pull the fluff filter (1) out as ...

[Page 27] Miele PT 7135 C

Cleaning them with water If there is a great deal of compacted fluff on any of the filters, they can be removed and cleaned under hot running water. ^ Open the door and pull the fluff filter out of the door as described previously. The two filters in...

[Page 28] Miele PT 7135 C

Cleaning the tumble dryer , Disconnect the machine from the mains electricity supply. , Do not use solvents, abrasive cleaners, glass cleaners or all-purpose cleaners. These could damage plastic surfaces and other parts. , The machine must never be h...

[Page 29] Miele PT 7135 C

Cleaning the heat exchanger , Check the heat exchanger unit regularly. It should always be cleaned immediately the Clean the heat exchanger or Clean the airways message appears. Removing the heat exchanger ^ Open the access panel. The hooks at the si...

[Page 30] Miele PT 7135 C

^ Pull the heat exchanger unit out of its housing by the handle. Checking the heat exchanger unit ^ Hold the heat exchanger unit up to the light as shown. ^ Check to see if there is any fluff inside it. The arrows in the illustration above indicate w...

[Page 31] Miele PT 7135 C

^ Then flush the unit through from the front. ^ Check the heat exchanger unit again for any visible fluff and if necessary flush it through again until it has all gone. ^ Shake any excess water out of the unit until no more water droplets are visible...

[Page 32] Miele PT 7135 C

Problem solving guide With the help of the following notes minor faults in the performance of the appliance, some of which may result from incorrect operation, can be put right without contacting the Service Department. Repair work to electrical appl...

[Page 33] Miele PT 7135 C

Problem Possible cause Remedy The following appears at the end of the programme: Maintenance message Clean the heat exchanger. The dryer is reminding you that heat exchanger unit needs cleaning. – Clean the heat exchanger. To delete the fault messa...

[Page 34] Miele PT 7135 C

Other problems Problem Possible cause Remedy The drying process goes on too long or even switches off. In some circumstances the following message also appears: Clean the airways . Please check all the possible causes and open and shut the dryer door...

[Page 35] Miele PT 7135 C

Problem Possible cause Remedy The heat exchanger unit service panel will not shut. The inner cover of the heat exchanger unit has not been locked properly and/or the heat exchanger unit has not been positioned correctly. – Ensure that the heat exch...

[Page 36] Miele PT 7135 C

Problem Possible cause Remedy The programme does not start and the display is dark. No obvious cause. – Is the dryer switched on? – Is the door closed properly? – Has the fuse or circuit breaker tripped? The interior drum lighting does not come...

[Page 37] Miele PT 7135 C

Changing the lamp Disconnect the machine from the mains electricity supply. ^ Open the door. You will find the interior lamp cover at the top of the drum aperture. ^ Insert a suitable tool, such as a wide bladed screwdriver, under the side edge of th...

[Page 38] Miele PT 7135 C

In the event of any faults which you cannot remedy yourself, or if the machine is under guarantee, please contact – your Miele dealer, or – the Miele Service Department (see back cover for contact details). When contacting the your dealer or the ...

[Page 39] Miele PT 7135 C

View from the front a Mains connection cable b Control panel c Door d Service panel for heat exchanger e Four height adjustable screw feet f External drainage options (e.g. via wash basin, wash basin drain outlet or gully) optional accessory: extensi...

[Page 40] Miele PT 7135 C

View from the side View from the rear a Protruding lid edge (see arrows) for holding when moving the machine b Steel plinth base (optional accessory, available open or closed) View from above Washer-dryer stack The tumble dryer can be combined with a...

[Page 41] Miele PT 7135 C

Installation on a concrete plinth ^ Secure the front feet of the dryer with clamps when installing the machine on a concrete plinth. Payment system The dryer can be fitted with a payment system (optional accessory). This must be connected and program...

[Page 42] Miele PT 7135 C

Installation site , Make sure the dryer door can be opened without hindrance after installation. Transporting the machine to its installation site When moving the machine you can hold it by the lid where it protrudes to the rear of the dryer. To mano...

[Page 43] Miele PT 7135 C

External drainage of the condensed water The condensed water is pumped away through the drain hose which is located at the back of the dryer at the bottom. Drain hose length: . . . . . . . . . . . . . . 2 m Delivery head: . . . . . . . . . . . . . . ...

[Page 44] Miele PT 7135 C

Electrical connection U.K. All electrical work should be carried out by a suitably qualified and competent person, in strict accordance with national and local safety regulations. Ensure power is not supplied to the appliance until after installation...

[Page 45] Miele PT 7135 C

Height 850 mm (adjustable +7 / -7 mm) Width 595 mm Depth 700 mm Depth with door open 1188 mm Weight 58 kg Drum volume 130 litres Maximum capacity 6.5 kg dry weight Length of connection cable 1600 mm Voltage see data plate Connected load see data plat...

[Page 46] Miele PT 7135 C

46 ...

[Page 47] Miele PT 7135 C

Settings menu J for changing standard settings The Settings menu is used to alter the dryer's electronics to suit different requirements. Settings can be altered at any time. 47 ...

[Page 48] Miele PT 7135 C

To open the Settings menu 1 Cottons Programme selection ... 2 Minimum iron Settings F ... 3 Woollens handcare 4 Smoothing 10:00 ^ Select Settings J from the entry menu and confirm your selection with the multi-function selector. Selecting settings Se...

[Page 49] Miele PT 7135 C

Language J The display can be set to appear in one of several different languages for the current programme. To select the language you want, go into the Languages J sub-menu. ^ Select the language you want and confirm your selection. The flag after...

[Page 50] Miele PT 7135 C

Display contrast Display brightness There are ten different display contrast and display brightness settings. The bar chart shows you the setting. Standby To save energy, the display goes out after 10 minutes and the Start button flashes slowly. On S...

[Page 51] Miele PT 7135 C

The Settings/Supervisor level needs to be activated by a Miele service technician. The Settings / Supervisor level is locked with a code to prevent it being accessed by non-authorised personnel (the Language J setting can still be altered). Settings ...

[Page 52] Miele PT 7135 C

Select languages You can select the order that you want the languages available to appear in in the display. Supervisor level You can alter the access code to the supervisor level. ^ Enter the old code. ^ Enter a new code. After you have confirmed th...

[Page 53] Miele PT 7135 C

Cleaning the airways Fluff should be removed after drying. The Clean the airways message will remind you to clean the filters when a certain amount of fluff has collected. You can decide at what level of fluff this reminder should be given. You will ...

[Page 54] Miele PT 7135 C

54 ...

[Page 55] Miele PT 7135 C

55 ...

[Page 56] Miele PT 7135 C

Alteration rights reserved/1505 M.-Nr. 06 511 380 / 00 en-GB ...