Technisonic Industries Limited RC-7000 Installation And Operating Instructions Manual

Download or browse on-line these Installation And Operating Instructions Manual for Technisonic Industries Limited RC-7000 Remote Control.

Technisonic Industries Limited RC-7000 Manual Information:

This manual for Technisonic Industries Limited RC-7000, given in the PDF format, is available for free online viewing and download without logging on. The guide contains 15 pages, and the size of the file at download is . The document type is Installation And Operating Instructions Manual.

Download Manual

Summary of Contents:

[Page 1] Technisonic Industries Limited RC-7000

MULTIBAND P25 AIRBORNE TRANSCEIVER REMOTE CONTROL MODEL RC-7000 Installation and Operating Instructions Til Document No. 06RE377 Rev. N/C June 2006 Technisonic Industries Limited ...

[Page 2] Technisonic Industries Limited RC-7000

CAUTION This unit contains static sensitive devices. Wear a grounded wrist strap and/or conductive gloves when handling printed circuit boards. WARNING: This device complies with Part 15 of the FCC Rules. Operation is subject ...

[Page 3] Technisonic Industries Limited RC-7000

Summary of DO-160C Environmental Qualifications for Technisonic Model RC-7000, Remote Control Head for the Model TDFM-7000 Transceiver.. Conditions Section Description of Qualifications Temperature and Altitude 4.0 Equ...

[Page 4] Technisonic Industries Limited RC-7000

TABLE OF CONTENTS Paragraph Title Page SECTION 1 GENERAL DESCRIPTION 1.1 Introduction .................................................................................... 1-1 1.2 Description .............................

[Page 5] Technisonic Industries Limited RC-7000

SECTION 1 GENERAL DESCRIPTION 1.1 INTRODUCTION This publication provides operating and installation information on the RC-7000 remote control. 1.2 DESCRIPTION The RC-7000 is designed to be a remote control head for the TDFM-...

[Page 6] Technisonic Industries Limited RC-7000

2-1 SECTION 2 OPERATING INSTRUCTIONS 2.1 GENERAL The RC-7000 is designed to be a secondary control point for the TDFM-7000 airborne transceiver. These instructions assume a working knowledge of the TDFM-7000. Operation of the R...

[Page 7] Technisonic Industries Limited RC-7000

2-2 2.6 F1 – F7 KEYS Function keys F1 through F4 operate the same as on the TDFM-7000 transceiver. F5, F6 and F7 are for future development and have no function at this time. 2.7 FUNC KEY Pressing the function key will invok...

[Page 8] Technisonic Industries Limited RC-7000

3-1 SECTION 3 INSTALLATION INSTRUCTIONS 3.1 GENERAL This section contains information and instructions for the correct installation of the RC- 7000 remote control. 3.2 EQUIPMENT PACKING LOG Unpack the equipment and check for a...

[Page 9] Technisonic Industries Limited RC-7000

3-2 FIGURE 3-1 Outline Drawing for Model RC-7000 ...

[Page 10] Technisonic Industries Limited RC-7000

3-3 3.6 INSTALLATION - PIN LOCATIONS AND CONNECTIONS J1 - 9 Pin D Connections - Use FEMALE Connector Pin # Description 1 Ground 2 Debug 3 Reset 4 +28 Volts DC 5 Vcc 6 Backlight 7...

[Page 11] Technisonic Industries Limited RC-7000

3-4 3.14 TX AND RX DATA - PINS 7 AND 8 These pins are to be connected to the RS-232 pins on the TDFM-7000. TX data connects to RX data on the radio and RX data from the remote goes to TX data on the radio. 3.15 AUTO ON - PIN 9 ...

[Page 12] Technisonic Industries Limited RC-7000

3-5 APPENDIX TO INSTALLATION INSTRUCTIONS POST INSTALLATION EMI TEST 3.7.1 PURPOSE The purpose of this test is to identify any interference that the RC-7000 remote control head may cause with existing aircraft systems. 3...

[Page 13] Technisonic Industries Limited RC-7000

3-6 3.7.4 RESULTS If the installed system passes all of the applicable EMI tests, then no further action is required. If interference is observed then the interference must be assessed against the appropriate standards of airworthi...

[Page 14] Technisonic Industries Limited RC-7000

3-7 3.7.5 PROCEDURE List the power plant, fuel and other electric instruments not already included in the chart below and note any anomalies that occur due to operation of the RC-7000. Assess the results. STEP SYSTEM ...

[Page 15] Technisonic Industries Limited RC-7000

3-8 STEP SYSTEM PASS FAIL NOTES 13 Fuel % 14 Ng 15 TOT 16 Torque % 17 Enuncia...