Ozito RSH-100 Instruction Manual

[Page 1] Ozito RSH-100

...

[Page 2] Ozito RSH-100

1. Hopper 2. Transport handle 3. Locking knob 4. On/off switch 5. Reset button 6. Power cord 7. Wheel 8. Wheel cap SPECIFICATIONS - MODEL NO. RSH-100 1 1 3 Motor: Input: No load speed: Max cutting diameter: Noise level: Protection class: Weight...

[Page 3] Ozito RSH-100

2 TABLE OF CONTENTS SPECIFICATIONS………………………………………… KNOW YOUR PRODUCT……………………………….. INTRODUCTION…………………………………………. ELECTRICAL SAFETY…………………………�...

[Page 4] Ozito RSH-100

INTRODUCTION 3 WARNING! When using mains-powered equipment, basic safety precautions, including the following, should always be followed to reduce risk of fire, electric shock, personal injury and material damage. Read and understand the manual prior...

[Page 5] Ozito RSH-100

! ! 4 GENERAL SAFETY INSTRUCTIONS W ARNING! Read all instructions. Failur e to follow all instructions listed below may result in electric shock, fire and/or serious injury. The term "power tool" in all of the warnings listed below refers t...

[Page 6] Ozito RSH-100

5 f) Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts. g) If devices are provided for the connection of dust extra...

[Page 7] Ozito RSH-100

6 ADDITIONAL SAFETY INSTRUCTIONS FOR SHREDDERS This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision ...

[Page 8] Ozito RSH-100

7 WARNING!The shredder may require a two person lift. Keep your feet apart so that you have a stable position, bend at the knees and keep your back straight. After removing the shredder from the carton check that the shredder has not been damaged. U...

[Page 9] Ozito RSH-100

8 ASSEMBLY (cont.) 5. Place the bush bearing (15) onto the wheel axle (17) (Fig. 5). 6. Insert the wheel (7) over the bush bearing (15) ensuring that the larger inner diameter of the wheel is facing outwards. This allows the wheel cap (8) to be f...

[Page 10] Ozito RSH-100

OPERATION 9 Starting the Shredder WARNING! Prior to starting the motor ensure the shredder is empty. Ensure you wear safety gloves, safety glasses and earmuffs when the shredder is in use. 1. Connect the power cord (6) to an appropriate extension...

[Page 11] Ozito RSH-100

OPERATION (cont.) Safety Interlock The shredder is fitted with a safety switch on the closure between the shredder housing and motor housing (Fig. 13). This acts as a safety mechanism to prevent the shredder from operating if it is not closed corre...

[Page 12] Ozito RSH-100

OPERATION (cont.) 11 4. Remove the 2 screws securing the blade using the allen key (11) by rotating in an anticlockwise direction (Fig. 17). 5. Remove the screws and either reverse the blades or insert new blades. 6. Retighten the blades by f...

[Page 13] Ozito RSH-100

OPERATION (cont.) 2. The shredder will automatically pull the material through the feeding hopper. The push stick (9) can be used to assist in feeding the garden material (Fig. 19). Following the below procedures will improve operation and prolon...

[Page 14] Ozito RSH-100

MAINTENANCE 13 WARNING! Always disconnect the shredder from the power supply before performing any maintenance. The shredder requires very little maintenance. In order to maintain the efficiency and achieve a long service life observe the following: ...

[Page 15] Ozito RSH-100

MAINTENANCE (cont.) 14 3. Carefully clean out the cutting and dischar ge area. Ensure that all debris is removed to prevent the blades from clogging. The discharge area should be free of all organic matter (Fig. 22). If the shredder is full of ...

[Page 16] Ozito RSH-100

TROUBLESHOOTING 15 Problem The motor does not run Solutions • Turn the shredder off and allow it to cool down for 1-5 minutes. Press the reset button and turn on the shredder. • The safety interlock will not allow power to the shredder. Open the...

[Page 17] Ozito RSH-100

Limited spare parts are available subject to availability. Please contact your local Bunnings Special Orders Desk to order the required spare parts. Most common spare parts listed below Spare Part/Accessories Part No. Blades (set of 2) SPRSH100-18A...

[Page 18] Ozito RSH-100

17 CARING FOR THE ENVIRONMENT AUSTRALIA (Head Office) 1 - 23 Letcon Drive, Bangholme, Victoria, Australia 3175 Telephone: 1800 069 486 Facsimile: +61 3 9238 5588 W ebsite: www.ozito.com.au Email: [email protected] Power tools that are no longe...

[Page 19] Ozito RSH-100

RSH-100 Manual.qxd 1/11/11 1:01 PM Page 19 ...

[Page 20] Ozito RSH-100

WARRANTY THIS WARRANTY FORM AND CONFIRMED BUNNINGS REGISTER RECEIPT SHOULD BE RETAINED BY THE CUSTOMER AT ALL TIMES The warranty is only made available by returning the product to your nearest Bunnings Warehouse with a confirmed Bunnings register re...