Jetcom CCTV SS-HDR-82 User Manual

[Page 1] Jetcom CCTV SS-HDR-82

pre-record H.264 HDMIVGA ...

[Page 2] Jetcom CCTV SS-HDR-82

In order to ensure your rights and interests, please read this manual carefully before you install and use the DVR. Use the appropriate adapter for the DVR. To protect the main chip from thunder striking, please make sure the ground wire is correctl...

[Page 3] Jetcom CCTV SS-HDR-82

Before connecting to other facilities, please disconnect the power supply and pull the power line plug out from the power socket. In case of any solid or liquid coming into the case, please disconnect the power supply immediately, and the DVR can ...

[Page 4] Jetcom CCTV SS-HDR-82

6 6 8 22 28 Table of contents Chapter II Operation instructions Chapter I Product Introduction 1.1 Summary 1.2 Functions and features 2.1 Description of front panel 2.2 Description of rear panel 2.3 Connection figure of rear panel 2.4 Des...

[Page 5] Jetcom CCTV SS-HDR-82

3.2 System setup 3.3 Camera setup 3.4 Record setup 3.5 Schedule setup 3.6 Motion alarm 3.7 PTZ setup 3.8 Network setup 3.9 Alarm setup 3.10 Disk management 3.11 User setup 32 31 34 35 36 37 38 39 40 40 40 33 43 44 Chapter IV Basic Opera...

[Page 6] Jetcom CCTV SS-HDR-82

Appendix 1 Technical parameters Appendix 2 Trouble shooting 47 47 48 48 51 52 53 53 54 55 57 51 4.5 System information 4.6 Log list 4.7 Recording preparation 4.8 Recording operation 4.9 Search, playback and backup 4.10 Audio setup 4.11 SEQ 4....

[Page 7] Jetcom CCTV SS-HDR-82

1.1 Summary Chapter I Product Introduction 1.2 Functions and features Network Digital Video Recorder Operation Manual ( V1.0 ) 6 This equipment is...

[Page 8] Jetcom CCTV SS-HDR-82

Support CMS. Support DDNS. Support network preview, playback, setup, remote recording, PTZ control and camera name setup. Support IE browsing and Network remote Client. Support Internet backup ,USB backup. Support mouse operation with high sensitivit...

[Page 9] Jetcom CCTV SS-HDR-82

Chapter II Operation Instructions 2.1 Description of front panel 1 Description NameNo. Power Network Digital Video Recorder Operation Manual ( V1.0 ) 8...

[Page 10] Jetcom CCTV SS-HDR-82

3 4 LED Indicator light HDD Hard drive LED indicator light. It is flash when hard drive is being used. IR Receiver Record Playback/ Pause Stop Search Start recording. In PTZ mode, it is used as [Z+] key on the remote control. Press it to pop up s...

[Page 11] Jetcom CCTV SS-HDR-82

5 Backup PTZ COPY INFO ESC SEQ AUDIO MENU Menu Press it to enter backup menu. Network Digital Video Recorder Operation Manual ( V1.0 ) PTZ Information Exit...

[Page 12] Jetcom CCTV SS-HDR-82

6 7 Network Digital Video Recorder Operation Manual ( V1.0 ) + - Shuttle USB port Connected to USB pendrive or mouse and used for system software upgrade or...

[Page 13] Jetcom CCTV SS-HDR-82

Front panel B:Front panel B: Network Digital Video Recorder Operation Manual ( V1.0 ) 1 NameNo. Information key Number keys 2 3 Icon INFO 1~16 press it once...

[Page 14] Jetcom CCTV SS-HDR-82

3 LED Indicator light 4 5 POWER HDD LOCK REC PLAY IR SEQ PTZ NET ALARM It is red in running mode, it is green in standby mode. It is off in power off mode. Hard drive LED indicator light. It will flash when the HDD is being used. Lock LED indicator l...

[Page 15] Jetcom CCTV SS-HDR-82

5 6 MENU Menu BAK AUDIO PTZ Quad key Nine-split key Sixteen-split key Backup key Audio key Fast Forward/ rewind key Press it to pop up the main menu. Press it to exit from the inferior menu and return to the superior menu. In record/playback mode, p...

[Page 16] Jetcom CCTV SS-HDR-82

7 In playback mode, press it to stop playing and return to search menu; in video recording mode, press it to stop recording; in PTZ mode, press it to view preset image. Press it to enter search menu. In PTZ mode, press it to set preset image. Sto...

[Page 17] Jetcom CCTV SS-HDR-82

Network Digital Video Recorder Operation Manual ( V1.0 ) 2.2 Description of rear panel 16 11 12 13 11 12 13 Rear panel A of 4 channel: Rear panel A of 8 c...

[Page 18] Jetcom CCTV SS-HDR-82

Network Digital Video Recorder Operation Manual ( V1.0 ) Video input Video output Standard BNC port, connected with the camera and speed dome. Connected wit...

[Page 19] Jetcom CCTV SS-HDR-82

Network Digital Video Recorder Operation Manual ( V1.0 ) HDMI Audio output Audio input Power Connected with earphone or cable speaker. Connected with audio...

[Page 20] Jetcom CCTV SS-HDR-82

Rear panel B of 8 channel: 12 11 Network Digital Video Recorder Operation Manual ( V1.0 ) 19 Rear panel B of 4 channel: 12 11 PrPb PrPb ...

[Page 21] Jetcom CCTV SS-HDR-82

Rear panel B of 16 channel: 12 11 Network Digital Video Recorder Operation Manual ( V1.0 ) Video input Video output Standard BNC port, connected with the ca...

[Page 22] Jetcom CCTV SS-HDR-82

Network Digital Video Recorder Operation Manual ( V1.0 ) Audio input VGA Audio output VGA video signal output port, connected with the VGA port of a compute...

[Page 23] Jetcom CCTV SS-HDR-82

Network Digital Video Recorder Operation Manual ( V1.0 ) Take 16 channel DVR as example to show how to connect. camera1 camera16 video output SPOT output Vi...

[Page 24] Jetcom CCTV SS-HDR-82

2.4 Description of alarm port in the rear panel Network Digital Video Recorder Operation Manual ( V1.0 ) PTZPTZPTZ Connection figure of alarm input and out...

[Page 25] Jetcom CCTV SS-HDR-82

3. Trouble shooting 2.5 Remote control operation 1. Installing the remote control 2. Using the remote control Network Digital Video Recorder Operation Manu...

[Page 26] Jetcom CCTV SS-HDR-82

Function description: Network Digital Video Recorder Operation Manual ( V1.0 ) 2 Audio Number Record Play&pause Stop Info 3 4 ...

[Page 27] Jetcom CCTV SS-HDR-82

Network Digital Video Recorder Operation Manual ( V1.0 ) 5 6 7 Forward Rewind ESC MENU Direction Confirm Exit Menu Quad Eight-split Sixteen-split In pl...

[Page 28] Jetcom CCTV SS-HDR-82

2.6 Mouse operation Network Digital Video Recorder Operation Manual ( V1.0 ) 7 8 CRUISE FOPEN FCLOSE In PTZ control mode, "I+/I-" key is used to ...

[Page 29] Jetcom CCTV SS-HDR-82

Chapter III Menu Setup 3.1 Summary of menu operation Network Digital Video Recorder Operation Manual ( V1.0 ) SAVESAVE EXITEXIT In live preview mode...

[Page 30] Jetcom CCTV SS-HDR-82

3.2 System setup (1) Time setup: used to adjust the system date and time. (2) Time format: used to set the format of date display, Asia/Europe/America are optional. (3) Time DISP POS: display position of time and date, top middle / bottom middle...

[Page 31] Jetcom CCTV SS-HDR-82

Network Digital Video Recorder Operation Manual ( V1.0 ) (6) Remote ID: used to set the remote control ID corresponding to the current machine so as to mak...

[Page 32] Jetcom CCTV SS-HDR-82

(1) Camera: used to select the channel to be revised parameters. (2) Camera title: used to set the camera title. Press key in the remote control / the front panel to turn into bitmap, the camera title couldn't be c...

[Page 33] Jetcom CCTV SS-HDR-82

3.4 Record setup Network Digital Video Recorder Operation Manual ( V1.0 ) (1) Resolution: CIF: 352 288 PAL ; 352 240 NTSC . DVR could be changed into D1 ...

[Page 34] Jetcom CCTV SS-HDR-82

3.5 Schedule setup (1) Camera: used to select the channel to be set. The parameters are effective for all channels after selecting" All CAM". (2) Day: used to select the day of video schedule. The parameters are effective for all days af...

[Page 35] Jetcom CCTV SS-HDR-82

3.6 Motion alarm (1) Camera: used to select the channel to be set. (2) Sensitivity: low / high optional from "1-10". The bigger number, the higher sensitivity. (3) Detect area setup: drag the mouse to set the detection area as light blu...

[Page 36] Jetcom CCTV SS-HDR-82

(1) Camera: to select the channel to be set. (2) Baudrate: to set baudrate corresponding to the current channel PTZ. (3) Device ID: to set ID address corresponding to the current channel PTZ. (4) Protocol: set communication protocol correspondin...

[Page 37] Jetcom CCTV SS-HDR-82

3.8 Network setup Network Digital Video Recorder Operation Manual ( V1.0 ) (1) IP allocation: STATIC and DHCP/DDNS optional. (In static mode, please set I...

[Page 38] Jetcom CCTV SS-HDR-82

3.9 Alarm setup Network Digital Video Recorder Operation Manual ( V1.0 ) There are two ways for alarm output, Buzzer and Relay. They include three alarm mo...

[Page 39] Jetcom CCTV SS-HDR-82

3.10 Disk management Note: You'd better format the hard disk before the first recording to protect the record video file. DISK A 074 099 000 SAVESAVE EXITEXIT FORMATFORMAT FORMATFORMAT Network Digital Video Recorder ...

[Page 40] Jetcom CCTV SS-HDR-82

(1) User name: ADMIN0, USER01, USER02 and USER03 are optional and changeable. ADMIN0 is default administrator account. (2) Password: set separate password for each user. Factory default setting: ADMIN:000000, USER01:111111, USER02:22...

[Page 41] Jetcom CCTV SS-HDR-82

Chapter IV Basic Operations 4.1 Turn on DVR 4.2 Live screen (1) Turn on the DVR, you could see the live screen. If no video input, the screen is as above: (Take 4 channel DVR as example.) Network Digital Video Recorder ...

[Page 42] Jetcom CCTV SS-HDR-82

(2) Channel name and record mode icon display in the bottom left of each channel. Description of record icon and mode: Red M Red S Red L Red T Green I Green L Yellow ? Yellow L Is is recording by motion alarm. It is recording by sensor alarm...

[Page 43] Jetcom CCTV SS-HDR-82

Lock Remote IR Audio Infomation Unlocked. Click it to lock. Locked. Click it to login by inputting password. Remote control is opened. Click it to close. Remote control is closed. Click it to open. Audio output is open. Click it to enter into audio s...

[Page 44] Jetcom CCTV SS-HDR-82

Split-screen Record play Stop Main menu PTZ SEQ SPOT Power Click it to display quad, nine-split-screen and sixteen-split-screen. Click it to starting recording. Click it to enter the menu of search & playback. Click it to stop recording or stop...

[Page 45] Jetcom CCTV SS-HDR-82

01 02 03 04 the machine. If "Update fail, try again!" pop up more than 4 times, please contact after-sales service department to deal with it. In the process of update, please ensure no power breakdown and don't pull out USB pend...

[Page 46] Jetcom CCTV SS-HDR-82

Please check the following table for the symbol of these icons: Preset key. Direction icon. Control the camera to turn up, down, left, and right. Preview preset key. Modify the parameter: Network Digital Video Recorder ...

[Page 47] Jetcom CCTV SS-HDR-82

data of image point. Select the item which need modify by pressing SPOT key in the remote control or clicking the item directly with the mouse.Then change the data by pressing / SEQ in the remote control or left/ right click with mouse. Preset ope...

[Page 48] Jetcom CCTV SS-HDR-82

4.7 Recording preparation Network Digital Video Recorder Operation Manual ( V1.0 ) 01 02 03 04 05 06 07 08 09 10 SYSTEM POWER ON SYSTEM POWER ON CAM08 ...

[Page 49] Jetcom CCTV SS-HDR-82

4.8 Recording operation 4.9 Search,playback and backup Press key or click " " icon in live or record mode to enter search menu.this menu is used for search, playback and backup video file. Adjusting time to search and select v...

[Page 50] Jetcom CCTV SS-HDR-82

(3) Backup device: You culd select DVD(1.5G) or USB pendrive in device item. The maximum capacity for DVD disk should not exceed 1.5G. (4) In option of date and start time, input the date and time you need to play, you could pr ess key t o...

[Page 51] Jetcom CCTV SS-HDR-82

could select the time segment you need to backup with mouse. And click the "Backup" icon to start backup.The process will last for a few minutes. When backup finished, please remove the device from DVR. (7) Please note that the size of vi...

[Page 52] Jetcom CCTV SS-HDR-82

Press the key in remote control or click the icon " " with mouse to enter audio setup interface. Take 16 channel DVR as example: AUDIO in the front panel or press the (1) Mute: Select mute, then there is no audio output i...

[Page 53] Jetcom CCTV SS-HDR-82

4.12 Spot output Network Digital Video Recorder Operation Manual ( V1.0 ) In live preview mode, press SPOT key in remote control or click " ...

[Page 54] Jetcom CCTV SS-HDR-82

4.13 User login 4.14 PC Client software instruction You could control the DVR via client software on PC. Please refer to < Client and network manual> attached in CD. ADMIN0 _ _ _ _ _ _ OKOK EXITEXIT Network Digital Video Record...

[Page 55] Jetcom CCTV SS-HDR-82

4.15 Power off Network Digital Video Recorder Operation Manual ( V1.0 ) Normal power off: Stop all the operations, press " " in the fro...

[Page 56] Jetcom CCTV SS-HDR-82

Appendix 1 Technical parameters Items 4CH H.264 DVR Video input Video output 1.0Vp-p/75 ,BNC 4 8CH H.264 DVR 16CH H.264 DVR 1.0Vp-p/75 ,BNC 8 1.0Vp-p/75 ,BNC 16 LOOP output SPOT output 1 1.0Vp-p/75 ,BNC 1 2 VGA 1 3 HDMI 1 4 YP...

[Page 57] Jetcom CCTV SS-HDR-82

4D1 real time compression 4D1 real time playback at the same time 8D1 or 8CIF real time compression, 1D1 or 8CIF real time playback at the same time Record resolution Audio Network port USB port PTZ control HOST 2.0 RS485 AC 220V / 110V RJ-45 ...

[Page 58] Jetcom CCTV SS-HDR-82

Network Digital Video Recorder Operation Manual ( V1.0 ) Default cause: The HDD power line or data cable is not connected well. Resolution: Please...

[Page 59] Jetcom CCTV SS-HDR-82

Network Digital Video Recorder Operation Manual ( V1.0 ) NOTE The operation manual is for reference only....