Uninterruptible Power System 400 User Manual

[Page 1] Uninterruptible Power System 400

USER MANUAL Line Interactive UPS Uninterruptible Power System ...

[Page 2] Uninterruptible Power System 400

IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS – This manual contains important instructions for models Line Interactive 400, 600, and 800 that should be followed during installation and maintenance of th...

[Page 3] Uninterruptible Power System 400

Safety – CAUTION!  This UPS utilizes voltages that may be hazardous. Do not attempt to disassemble the unit. The unit contains no user serviceable parts. Only factory service personnel may perform repairs.  Internal battery v...

[Page 4] Uninterruptible Power System 400

 Servicing of batteries should be performed or supervised by personnel knowledgeable of batteries and the required precautions. Keep unauthorized personnel away from batteries.  When replacing batteries, replace with the same type...

[Page 5] Uninterruptible Power System 400

1. Introduction This UPS is specially designed for Personal Computer with multi-functions. Its light weight, compact design perfect fits to the limited working environment. The line of UPS is equipped with boost and buck AVR to s...

[Page 6] Uninterruptible Power System 400

2. Charging This unit is shipped from the factory with its internal battery fully charged, however, some charge may be lost during shipping and the battery should be recharged prior to use. Plug the unit into an appropriate...

[Page 7] Uninterruptible Power System 400

4. Connection Plug the UPS into a 2-pole, 3-wire grounded receptacle. Then connect one computer-related device into each of the power receptacles supplied on the back of the UPS. 5. Turn On/Off To turn on the UPS unit, press the power ...

[Page 8] Uninterruptible Power System 400

3. System Description Front panel: 1. Power Switch 2. LED Indicators – AC Mode: Green lighting Battery Mode: Green flashing Back Panel 1. Output receptacles 2. AC input with AC fuse 3. Modem/Phoneline Surge Protection 4. ...

[Page 9] Uninterruptible Power System 400

4. Trouble Shooting Symptom Possible Cause Remedy No LED display on the front panel. 1. Missing battery. 1. Charge battery up to 8 hours. 2. Battery defect. 2. Replace with the same type of battery. 3. Power switch is ...

[Page 10] Uninterruptible Power System 400

5. Specification 6. MODEL 400 600 800 CAPACITY VA/W 400VA/240W 600VA/360W 800VA/480W INPUT Voltage 110/120VAC or 220/230/240VAC Voltage Range 81-140VAC or 162-290VAC Frequency 45-65 Hz (Auto Sensing) OUTPU...