Paradox Matrix2000 User Manual

[Page 1] Paradox Matrix2000

Matrix2000 User Guide - CPD Advanced Analog Fire Alarm Control Panel 4 – 24 Zones Version: 2.0 Revision: 0.2 ...

[Page 2] Paradox Matrix2000

IMPORTANT INFORMATION Limitation of liability It is mandatory, Matrix2000 panel to be installed in accordance with this manual, applicable codes, and the instructions of the Authority Having Jurisdiction. The manufacturer shall not under any cir- cu...

[Page 3] Paradox Matrix2000

1. General Description 4 2. Keyboard Indications and Controls 4 2.1 POWER Indication 4 2.1.1 Battery faults 5 2.2 System FAULT indication (General Fault) 5 2.3.1 SIGNALING DEVICE fault 6 2.3.2 EARTH fault 6 2.3.3 AUX POWER Fault 6 2.4 Zone Fa...

[Page 4] Paradox Matrix2000

4 5 1. General Description The Matrix2000 advanced analog re alarm control panels have been designed to provide full re detection coverage to buildings or installations that require re detection systems of 4 to 24 zones. The...

[Page 5] Paradox Matrix2000

4 5 Matrix2000 - Advanced Analog Fire Alarm Control Panel number of reasons. Some of them are: Main power failure for an extended period of time during which the batteries have • been depleted. Blown main board fuse.• Other malfunction of the p...

[Page 6] Paradox Matrix2000

6 7 Matrix2000 - Advanced Analog Fire Alarm Control Panel 6 7 2.3 Additional system fault indications In this group three distinct fault conditions are indicated: 2.3.1 SIGNALING DEVICE fault When active, this indicator signies a fault condition...

[Page 7] Paradox Matrix2000

6 7 6 7 Matrix2000 - Advanced Analog Fire Alarm Control Panel (c) In the case that both of the above cases occurs, the LED indication starts blinking (Figure 2, Pattern c), while at the same time there is an audible notication from the on boar...

[Page 8] Paradox Matrix2000

8 9 Matrix2000 - Advanced Analog Fire Alarm Control Panel 8 9 Alarm Mode. To silence the Buzzer, press the SILENCE key, with the keyswitch in the Control Enable position. All indications will remain ON until the Reset button is pressed. Keypad b...

[Page 9] Paradox Matrix2000

8 9 8 9 Matrix2000 - Advanced Analog Fire Alarm Control Panel 4. Controls Via Keypad Keypad keys, are activated only when the key of the Keyswitch is set in the Control Enable position. 4.1 System SILENCE key Pressing the SILENCE key will cause...

[Page 10] Paradox Matrix2000

10 11 Matrix2000 - Advanced Analog Fire Alarm Control Panel 10 11 RESPONDING TO ALARM SIGNALS Evacuate the area.1. Notify the proper authorities immediately 2. and state the nature and location of the emergency. Be prepared to prov...

[Page 11] Paradox Matrix2000

10 11 10 11 Matrix2000 - Advanced Analog Fire Alarm Control Panel ZONES DESCRIPTION Zone 1:______________________________________________________________________ Zone 2:______________________________________________________________________ Zo...

[Page 12] Paradox Matrix2000

Document Part Number: MATRIX-UG01, CPD version 2.0, revision 0.2 - November 2010 ...