Husqvarna PZ6034FXZT Operator's Manual

[Page 1] Husqvarna PZ6034FXZT

Please read the operator’s manual carefully and make sure you understand the instructions before using the machine. Gasoline containing up to 10% ethanol (E10) is acceptable for use in this machine. The use of any gasoline exceeding 10% ethanol ...

[Page 2] Husqvarna PZ6034FXZT

©2011. All rights reserved. Orangeburg, SC. Printed in U.S.A. To implement improvements, specifications and designs can be altered without prior notification. Note that no legal demands can be placed based on the information contained in these ins...

[Page 3] Husqvarna PZ6034FXZT

CONTENTS INTRODUCTION ............................................................... 5 Driving and Transport on Public Roads ...................... 5 Towing ......................................................................... 5 Operating .........

[Page 4] Husqvarna PZ6034FXZT

WARNING! Failure to follow cautious operating practices can result in serious injury to the operator or other persons. The owner must understand these instructions, and must allow only trained persons who understand these instructions to operate th...

[Page 5] Husqvarna PZ6034FXZT

5 INTRODUCTION Congratulations Thank you for purchasing a Husqvarna ride-on mower. This machine is built for superior efficiency to rapidly mow primarily large areas. A control panel easily accessible to the operator and a hydrostatic transmissi...

[Page 6] Husqvarna PZ6034FXZT

6 INTRODUCTION Good Service Husqvarna’s products are sold all over the world and only in specialized retail stores with complete service. This ensures that you as a customer receive only the best support and service. Before the product is deliv...

[Page 7] Husqvarna PZ6034FXZT

SYMBOLS AND DECALS 7 R N IMPORTANT INFORMATION Xxxx xxxxxx xxxxx xxxx xxxxxxxxx xxxxxx xxxxxxxxx. xx xxxxxxxx xxxx xxxxxx. WARNING! Xxxx xxxxxx xxxxx xxxx xxxxxxxxx xxxxxx xxxxxxxxx. xx xxxxxxxx xxxx xxxxxx. These symbols are found on the machine ...

[Page 8] Husqvarna PZ6034FXZT

SYMBOLS AND DECALS 8 Moving sharp blades under cover Warning! Rotating blades, keep away from the discharge deck Do not touch parts Battery acid is corrosive, explosive and flammable Read Operator’s Manual Shut off engine and remove key befo...

[Page 9] Husqvarna PZ6034FXZT

SAFETY 9 0000-000 Read the operator’s manual before starting the machine 0000-000 Clear the area of objects before mowing Safety Instructions These instructions are for your safety. Read them carefully. WARNING! THIS CUTTING MACHINE IS CAPABLE OF...

[Page 10] Husqvarna PZ6034FXZT

SAFETY 10 8011-520 Never take passengers WARNING! Engine exhaust and certain vehicle components contain or emit chemicals considered to cause cancer, birth defects, or other reproductive system damage. The engine exhaust contains carbon monoxide...

[Page 11] Husqvarna PZ6034FXZT

SAFETY 11 Personal Safety Equipment • Make sure that you have first aid equipment close at hand when using the machine. • Never use the machine when barefoot. • Always wear protective shoes or boots, preferably with steel toe caps. • A...

[Page 12] Husqvarna PZ6034FXZT

SAFETY 12 • Do not use on steep slopes. • Do not try to stabilize the machine by putting a foot on the ground. • Do not mow near drop-offs, ditches, or embankments. The machine could suddenly roll over if a wheel is over the edge or if th...

[Page 13] Husqvarna PZ6034FXZT

SAFETY 13 8011-516 Never fill the fuel tank indoors WARNING! The engine and the exhaust system become very hot during operation. There is risk for burns if touched. Allow engine and exhaust system to cool before refueling. Safe Handling of Gasolin...

[Page 14] Husqvarna PZ6034FXZT

SAFETY 14 8011-515 Never drive the machine in an enclosed space WARNING! The battery contains lead and lead compounds, chemicals that are considered to cause cancer, birth defects, and other reproductive system damage. Wash your hands after hand...

[Page 15] Husqvarna PZ6034FXZT

SAFETY 15 8009-728 Risk of sparking WARNING! Avoid electrical sparking and its consequences by the following routines: 8011-514 Regularly clean deck Sparking can occur when working with the battery and the heavy cables of the starter circuit. This...

[Page 16] Husqvarna PZ6034FXZT

SAFETY 16 Transport 1. The machine is heavy and can cause serious crushing injuries. Be extra cautious when it is loaded on or unloaded from a vehicle or trailer. 2. Use an approved trailer to transport the machine. Activate the parking brake, t...

[Page 17] Husqvarna PZ6034FXZT

SAFETY 17 Rollover Protection System (ROPS) The ROPS increases the basic weight of the unit by 73 lbs/33 kg. • Do not use ROPS as a lifting, attaching or anchoring point. • Do not use ROPS for wrecking or towing. • Do not exceed Max GVW: 2...

[Page 18] Husqvarna PZ6034FXZT

CONTROLS 18 This operator’s manual describes the Husqvarna Zero Turn Rider. The rider is fitted with a Kawasaki four- stroke overhead valve engine. Transmission from the engine is made via belt-driven hydraulic pumps. Using the left and right st...

[Page 19] Husqvarna PZ6034FXZT

CONTROLS 19 Motion Control Levers The machine’s speed and direction are continuously variable using the two steering controls. The steering controls can be moved forward or backward about a neutral position. Furthermore, there is a neutral posi...

[Page 20] Husqvarna PZ6034FXZT

CONTROLS 20 Blade Switch To engage the mower deck, pull the blade switch knob out. The mower blades are disengaged when the knob is pressed down fully. 8065-004 Blade switch Parking Brake The parking brake is found on the left of the machine. Pull...

[Page 21] Husqvarna PZ6034FXZT

CONTROLS 21 8065-059 Ignition switch - RUN position Release the key to the RUN position when the engine has started. For using ACCESSORY, turn the key clockwise. 8065-057 Ignition switch - accessory Ignition Switch The ignition key is placed on the ...

[Page 22] Husqvarna PZ6034FXZT

CONTROLS 22 8065-004 Choke control Choke Control The choke control is used for cold starts in order to provide the engine with a richer fuel mixture. For cold starts the control should be pulled up. Fuses Fuses are located on the right hand side of ...

[Page 23] Husqvarna PZ6034FXZT

CONTROLS 23 1 2 Cutting Height Pedals The cutting height pedals release the deck lift to allow setting the desired deck height. Apply pressure to the lift pedal and rotate foot to also apply pressure to the release pedal, unlocking the deck lift. ...

[Page 24] Husqvarna PZ6034FXZT

CONTROLS 24 IMPORTANT INFORMATION Seat should not be adjusted while unit is in motion. Seat Adjustment Lever The seat can be adjusted lengthways. The lever is located at the right side of the seat (as seen by the driver in the seat). When making a...

[Page 25] Husqvarna PZ6034FXZT

CONTROLS 25 IMPORTANT INFORMATION Experience indicates that alcohol blended fuels (called gasohol, ethanol or methanol) can attract moisture which leads to separation and formation of acids during storage. Acidic gas can damage the fuel system of...

[Page 26] Husqvarna PZ6034FXZT

OPERATION 26 Read the Safety Instructions section and the following pages if you are unfamiliar with the machine. Training Due to unique steering capabilities, zero turn mowers are far more maneuverable than typical riding mowers. This section sho...

[Page 27] Husqvarna PZ6034FXZT

OPERATION 27 Before Starting 1. Read the sections on Safety and Controls before starting the machine. 2. Perform the daily maintenance before starting (see Maintenance Schedule in the Maintenance section). 3. Check that there is sufficient fue...

[Page 28] Husqvarna PZ6034FXZT

OPERATION 28 Starting the Engine 1. Sit on the seat. 2. Raise the mower deck to the transport position by setting the lift pedals fully forward. 3. Activate the parking brake. 4. Disengage the mower blades by pressing the blade switch downwards...

[Page 29] Husqvarna PZ6034FXZT

OPERATION 29 5. Move the steering controls outward to the locked (outer) neutral position. 8065-018 Place controls in neutral position 7. If the engine is cold, the choke control should be pulled up. 8065-015 Set the choke control 6. Move the th...

[Page 30] Husqvarna PZ6034FXZT

OPERATION 30 9. Press in and turn the ignition key to the start position. 10. When the engine starts, immediately release the ignition key back to the run position. Push the choke control in gradually when the engine has started. IMPORTANT INFO...

[Page 31] Husqvarna PZ6034FXZT

OPERATION 31 11. Set the engine speed with the throttle. Allow the engine to run at a moderate speed, approximately mid throttle, for 3-5 minutes before loading it too heavily. USE FULL THROTTLE WHEN MOWING (no choke). WARNING! Engine exhaust an...

[Page 32] Husqvarna PZ6034FXZT

OPERATION 32 Weak Battery If the battery is too weak to start the engine, it should be recharged. (See Battery in the Maintenance section.) Jumper Cables Use 1. Connect each end of the RED cable to the POSITIVE (+) terminal on each battery, takin...

[Page 33] Husqvarna PZ6034FXZT

OPERATION 33 Running 1. Release the parking brake by moving the lever downward. NOTE: The mower is equipped with an operator presence system. When the engine is running, any attempt by the operator to leave the seat without first setting the p...

[Page 34] Husqvarna PZ6034FXZT

OPERATION 34 Operating on Hills Read the Safety Instructions Driving on Slopes in the Safety Instructions. WARNING! Do not drive up or down hills with slopes greater than 10 degrees. Do not drive across slopes. 8065-018 Place controls in neutral p...

[Page 35] Husqvarna PZ6034FXZT

OPERATION 35 8011-603b Mowing pattern Mowing Tips • Observe and flag rocks and other fixed objects to avoid collisions. • Begin with a high cutting height and reduce it until the desired mowing result is attained. The average lawn should b...

[Page 36] Husqvarna PZ6034FXZT

OPERATION 36 IMPORTANT INFORMATION Leaving the ignition switch in any other position than OFF will cause the battery to be discharged. Stopping the Engine 1. Move the throttle to the minimum position (tortoise symbol).pressing the blade switch. 2...

[Page 37] Husqvarna PZ6034FXZT

OPERATION 37 Moving Machine By Hand WARNING! No adjustments or maintenance should be carried out unless: • the engine stopped • the ignition key removed • the parking brake activated 8050-231 Right side, ZT-5400 bypass valve Bypass Valves B...

[Page 38] Husqvarna PZ6034FXZT

MAINTENANCE 38 1) First change after 8-10 hours. When operating with a heavy load or at high ambient temperatures, replace every 50 hours. 2) In dusty conditions, cleaning and replacement are required more often. 3) Performed by authorized ser...

[Page 39] Husqvarna PZ6034FXZT

MAINTENANCE 39 1) First change after 5-8 hours. When operating with a heavy load or at high ambient temperatures, replace every 50 hours. 2) In dusty conditions, cleaning and replacement are required more often. 3) Performed by authorized serv...

[Page 40] Husqvarna PZ6034FXZT

MAINTENANCE 40 1 2 Battery The mower is equipped with a maintenance free battery and does not need servicing. However, periodic charging of the battery with an automotive type battery charger will extend its life. • Keep battery and terminals c...

[Page 41] Husqvarna PZ6034FXZT

MAINTENANCE 41 Safety System This machine is equipped with a safety system that prevents starting or driving under the following conditions. The engine can only be started when: 1. The mower deck is disengaged. 2. The steering controls are in the...

[Page 42] Husqvarna PZ6034FXZT

MAINTENANCE 42 1 2 1¾" Parking Brake Visually check that no damage is found on the lever, links, or switch belonging to the parking brake. Perform a standstill test and check that there is sufficient braking action. IMPORTANT INFORMATION Th...

[Page 43] Husqvarna PZ6034FXZT

MAINTENANCE 43 A C B D 1 /8"-¼" gap with park brake engaged 8065-052 Parking brake adjustment 5. If adjustments are needed, loosen B jam nut and turn A jam nut until the correct distance is achieved. Retighten B jam nuts against A jam...

[Page 44] Husqvarna PZ6034FXZT

MAINTENANCE 44 8065-040 Release the belt tension Deck Belt Deck Belt Removal Park on a level surface. Apply park brake. Lower the deck into the lowest cutting position. 1. Remove foot plate and belt shields. 2. Remove any dirt or grass that may ha...

[Page 45] Husqvarna PZ6034FXZT

MAINTENANCE 45 1 2 3 Pump Belt The belts are not adjustable. Replace belts if they begin to slip from wear. Replacing Pump Belt Park the mower on a level surface. Engage the parking brake. Belt Removal 1. Remove the deck belt (see Deck Belt Remova...

[Page 46] Husqvarna PZ6034FXZT

MAINTENANCE 46 2 3 1 IMPORTANT INFORMATION The sharpening of blades should be carried out by an authorized service workshop. Cutting Blades To attain the best mowing effect, it is important that blades are well sharpened and not damaged. Replace bl...

[Page 47] Husqvarna PZ6034FXZT

MAINTENANCE 47 2 1 Adjusting the Mower Deck Leveling Deck Adjust the deck while the mower is on a level surface. Make sure the tires are inflated to the correct pressure. See Tire Pressures in Maintenance section. If tires are under or over infl...

[Page 48] Husqvarna PZ6034FXZT

MAINTENANCE 48 2 1 Anti-scalp Rollers Anti-scalp rollers keep the deck in the proper position to help prevent scalping in most terrain conditions. Do not adjust the rollers to support the deck. IMPORTANT INFORMATION Adjust anti-scalp rollers with t...

[Page 49] Husqvarna PZ6034FXZT

MAINTENANCE 49 Use protective glasses when cleaning and washing. Cleaning Regular cleaning and washing, especially under the mower deck, will increase the machine’s life-span. Make it a habit to clean the machine directly after use (after it is...

[Page 50] Husqvarna PZ6034FXZT

50 LUBRICATION 50 12/12 Every year 1/52 Every Week 1/365 Every day Lubricate with grease gun Oil change Filter change Level check 8065-031 Lubrication Schedule General Remove the ignition key to prevent unintentional movements during lubrication. Wh...

[Page 51] Husqvarna PZ6034FXZT

51 LUBRICATION 51 Wheel and Deck Zerks Use only good quality bearing grease. Grease from well-known brand names (petrochemical companies, etc.) usually maintains a good quality. Front Wheel Mount Remove dust cap to expose zerk. Lubricate with a gre...

[Page 52] Husqvarna PZ6034FXZT

52 LUBRICATION 52 3 2 6 4 5 1 Hydraulic Drive - ZT5400 Fluid and Filter Change This transaxle is designed with a servicable filter. To ensure constant fluid quality levels and longer life, an initial oil and filter change at 100 hours is recomm...

[Page 53] Husqvarna PZ6034FXZT

53 LUBRICATION 53 Transmission Purging Procedures Due to the effects air has on efficiency in hydrostatic drive applications, it is critical to purge the system. These purge procedures should be implemented any time a hydrostatic system has been o...

[Page 54] Husqvarna PZ6034FXZT

TROUBLESHOOTING 54 Problem Cause Engine will not start • Blade switch is engaged. • Steering controls are not locked in the neutral position • Parking brake is not activated • Battery is dead • Contamination in the carburetor or fuel l...

[Page 55] Husqvarna PZ6034FXZT

TROUBLESHOOTING 55 Problem Cause Engine overheats • Clogged air intake or cooling fins • Engine overloaded • Poor ventilation around engine • Defective engine speed regulator • Too little or no oil in the engine • Contamination in ...

[Page 56] Husqvarna PZ6034FXZT

STORAGE 56 Winter Storage The machine should be readied for storage at the end of the mowing season or if it will not be in use for longer than 30 days. Fuel allowed to stand for long periods of time (30 days or more) can leave sticky residues tha...

[Page 57] Husqvarna PZ6034FXZT

WIRING DIAGRAM 57 TIMER SCHEMATIC ...

[Page 58] Husqvarna PZ6034FXZT

TECHNICAL DATA 58 PZ6034FX ZT Engine Manufacturer Kawasaki Type FX921V Power 31 HP* (23.1 Kw) @ 3600 rpm Lubrication Pressure w/ Oil Filter Fuel Min 87 octane unleaded (Max ethyl alcohol 10%, Max MTBE 15%) Fuel tanks capacity 11 gallons / 41.6 liter...

[Page 59] Husqvarna PZ6034FXZT

TECHNICAL DATA 59 PZ6034FX ZT Frame Cutting Width 60" (152.4 cm) Cutting Height 1"-5" (2.5-12.7 cm) Uncut Circle 0 Number of Blades 3 Blade Length 21" / 53.3 cm Antii-scalp Rollers 5 adjustable Sprung Seat Suspension Hinged Arm Re...

[Page 60] Husqvarna PZ6034FXZT

TECHNICAL DATA 60 Engine crankshaft bolt 50 ft/lb (67 Nm) Deck pulley bolts 150 ft/lb (203 Nm) Lug nuts 75 ft/lb (100 Nm) Blade bolt 90 ft/lb (122 Nm) Standard ¼" fasteners 9 ft/lb (12 Nm) Standard 5 /16" fasteners 18 ft/lb (2...

[Page 61] Husqvarna PZ6034FXZT

CONFORMITY CERTIFICATES 61 USA requirements Labels are placed on the engine and/or in the engine compartment stating that the machine will fulfill the requirements. This is also applicable to special requirements for any of the states, (Californi...

[Page 62] Husqvarna PZ6034FXZT

SERVICE JOURNAL Action Date, mtr reading, stamp, sign 62 Delivery Service Charge and connect the battery. ¨ Adjust the tire pressure of all wheels to 15 PSI (1 bar). ¨ Connect the contact box to the cable for the seat’s safety switch. ¨ Check hy...

[Page 63] Husqvarna PZ6034FXZT

SERVICE JOURNAL Action Date, mtr reading, stamp, sign 63 After 10 hours Change the engine oil. ¨ Change the oil filter. ¨ Check hydraulic oil level. ¨ Inspect hydraulic hoses. ¨ Inspect hydraulic belt ¨ Inspect hydraulic filter. ¨ Check neutr...

[Page 64] Husqvarna PZ6034FXZT

SERVICE JOURNAL Action Date, mtr reading, stamp, sign 64 Daily Service Clean debris from mower. ¨ Check engine oil level. ¨ Check the tire pressures. ¨ Check underside of deck. ¨ Inspect deck pulleys. ¨ Check/clean the engine’s cooling air int...

[Page 65] Husqvarna PZ6034FXZT

SERVICE JOURNAL Action Date, mtr reading, stamp, sign 65 50-Hour Service Clean debris from mower. ¨ Check engine oil level. ¨ Check the tire pressures. ¨ Check underside of deck. ¨ Inspect deck pulleys. ¨ Check/clean the engine’s cooling air i...

[Page 66] Husqvarna PZ6034FXZT

SERVICE JOURNAL Action Date, mtr reading, stamp, sign 66 250-Hour Service Grease fittings (caster pivots and caster wheels) ¨ Inspect dampers ¨ Inspect frame ¨ Inspect throttle and choke cables ¨ Inspect hardware ¨ Check the tire pressures ¨ C...

[Page 67] Husqvarna PZ6034FXZT

SERVICE JOURNAL Action Date, mtr reading, stamp, sign 67 500-Hour Service Grease fittings (caster pivots and caster wheels) ¨ Inspect dampers ¨ Inspect frame ¨ Inspect throttle and choke cables ¨ Inspect hardware ¨ Check the tire pressures ¨ C...

[Page 68] Husqvarna PZ6034FXZT

SERVICE JOURNAL Action Date, mtr reading, stamp, sign 68 At Least Once Each Year Clean the engine’s cooling air intake. ¨ Replace the air cleaner’s pre-filter (foam). ¨ Replace the air filter’s paper cartridge. ¨ Change the engine oil. ¨ ...

[Page 69] Husqvarna PZ6034FXZT

SERVICE JOURNAL Action Date, mtr reading, stamp, sign 69 ...

[Page 70] Husqvarna PZ6034FXZT

SERVICE JOURNAL Action Date, mtr reading, stamp, sign 70 ...

[Page 71] Husqvarna PZ6034FXZT

...

[Page 72] Husqvarna PZ6034FXZT

www.husqvarna.com 115 462327 Rev A 2011-11-10 ...