Husqvarna Sapphire 875 Quilt User Manual

Download or browse on-line these Operation & User’s Manual for Husqvarna Sapphire 875 Quilt Sewing Machine.

Husqvarna Sapphire 875 Quilt Manual Information:

This manual for Husqvarna Sapphire 875 Quilt, given in the PDF format, is available for free online viewing and download without logging on. The guide contains 56 pages, and the size of the file at download is . The document type is Operation & User’s Manual.

Download Manual

Summary of Contents:

[Page 1] Husqvarna Sapphire 875 Quilt

KEEPING THE WORLD SEWING™ User’s Guide ...

[Page 2] Husqvarna Sapphire 875 Quilt

This household sewing machine is designed to comply with IEC/EN 60335-2-28 and UL1594 IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, basic safety precautions should always be followed, including the following: Read all instructions...

[Page 3] Husqvarna Sapphire 875 Quilt

1 2 2 3 4 Getting ready to sew Page 7-17 Operating the machine Page 18-34 Basic sewing techniques Page 35-46 Taking care of the machine Page 47-49 Stitch and alphabet overview, page 50-53 Machine overview and accessories, page 5-6 ...

[Page 4] Husqvarna Sapphire 875 Quilt

Table of contents Machine overview ............................................................5 Included accessories ........................................................6 1. Getting ready to sew Unpacking ...........................................

[Page 5] Husqvarna Sapphire 875 Quilt

5 1 2 4 5 6 7 3 8 9 11 12 13 14 10 15 16 17 18 19 20 21 23 24 25 26 22 27 28 9 29 Machine overview 1. Lid 2. Pre-tension thread guide 3. Thread tension disks 4. Thread take-up lever 5. Thread tension dial, 835/855 6. Thread tension for bobbin wi...

[Page 6] Husqvarna Sapphire 875 Quilt

6 1 2 34 5 6 7 8 11 9 10 Included accessories Presser Feet Utility Foot A Attached on the machine upon delivery. This foot is used mainly for straight stitching and zigzag stitching with a stitch length longer than 1.0. Utility Foot B When sewing de...

[Page 7] Husqvarna Sapphire 875 Quilt

7 1 Getting ready to sew Unpacking 1. Place the machine on a sturdy, Á at surface, remove the packaging and lift off the cover. 2. Remove the packing material and the foot control. 3. The machine is delivered with an accessory bag, a power cord...

[Page 8] Husqvarna Sapphire 875 Quilt

8 123 Getting ready to sew Connecting the foot control cord Among the accessories you will À nd the foot control cord and the power cord. Connecting the foot control cord to the foot control is only necessary the very À rst time you are going to ...

[Page 9] Husqvarna Sapphire 875 Quilt

9 1 Getting ready to sew Lower the feed teeth The feed teeth are lowered when you move the switch on the front of the free arm to the right. Move the switch to the left if you wish to raise the feed teeth. The feed teeth will raise as you begin t...

[Page 10] Husqvarna Sapphire 875 Quilt

10 A D B C 1 2 Getting ready to sew Needles The sewing machine needle plays an important role in successful sewing. To ensure you will get a quality needle, we recommend needles of system 130/705H. The needle package included with your machine co...

[Page 11] Husqvarna Sapphire 875 Quilt

11 1 A B Getting ready to sew Spool pins and spool caps Your sewing machine has two spool pins, a main spool pin and an auxiliary spool pin. The spool pins are designed for all types of thread. The main spool pin is adjustable and can be used in a...

[Page 12] Husqvarna Sapphire 875 Quilt

12 A B C D E Getting ready to sew Threading the upper thread Make sure the presser foot is raised and the needle is in the up position Press the ON/OFF switch to OFF. 1. Place the thread on the spool pin and the spool cap on the spool pin as des...

[Page 13] Husqvarna Sapphire 875 Quilt

13 1 12 3 4 A B C Getting ready to sew Needle threader The needle must be in the up position to use the built-in needle threader. We also recommend lowering the presser foot. 1. Use the handle to pull the needle threader all the way down, catching...

[Page 14] Husqvarna Sapphire 875 Quilt

14 A C D B D C Getting ready to sew Threading for twin needles Press the ON/OFF switch to OFF. 1. Insert a twin needle. 2. Use a second thread spool or wind a bobbin with the thread you are going to use as the second upper thread. 3. Lift the...

[Page 15] Husqvarna Sapphire 875 Quilt

15 1 A B C A B C D Getting ready to sew Winding the bobbin using the vertical spool pin 1. Place an empty bobbin on the bobbin spindle on the top of the machine. The bobbin only À ts on one way, with the logo facing up. Use only original HUSQ...

[Page 16] Husqvarna Sapphire 875 Quilt

16 1 2 3 E F G 12 34 I H Getting ready to sew Inserting the bobbin Press the ON/OFF switch to OFF. 1. Remove the bobbin cover by sliding it towards you. 2. Place the bobbin in the bobbin case. It drops in only one way with the logo facing up....

[Page 17] Husqvarna Sapphire 875 Quilt

17 1 Getting ready to sew EXCLUSIVE SENSOR SYSTEM™ (ESS) Sensor Foot Pressure With the Sensor Foot Pressure, the presser foot actually senses the thickness of fabric and stitching to sew over it smoothly and evenly with perfect fabric feeding. ...

[Page 18] Husqvarna Sapphire 875 Quilt

18 835/855 875 Quilt 1 2 5 7 3 6 4 8 9 2 3 7 6 4 5 1 Operating the machine 1. Needle Stop Up/Down Press this button to move the needle down or up. The setting of the needle stop position is changed at the same time. The upper LED next to the button...

[Page 19] Husqvarna Sapphire 875 Quilt

19 2 Operating the machine 6. Fix By using the FIX button you can lock the stitch at the beginning and/or at the end. The LED next to the button is lit when FIX is activated. Press the FIX button to turn off the function. The FIX function is au...

[Page 20] Husqvarna Sapphire 875 Quilt

20 855 835 ALT CLR 10 11 12 15 13 14 16 17 18 19 21 24 20 25 10 11 12 15 13 14 16 17 18 19 21 24 20 25 Operating the machine Function buttons on the Touch Panel 10. Alternate View When you select a satin stitch the length and width settings will b...

[Page 21] Husqvarna Sapphire 875 Quilt

21 2 875 Quilt 22 2423 10 11 12 15 13 14 16 17 18 19 21 20 25 Operating the machine 14. Stitch Selection Buttons By pressing any of the 0 to 9 buttons you select the stitch illustrated on that button immediately. By pressing two digits in quick s...

[Page 22] Husqvarna Sapphire 875 Quilt

22 1 2 3 9 4 5 6 7 8 10 11 12 13 15 14 17 16 Operating the machine Sewing Mode, 835 Sewing Mode is the À rst view on the GraphicDisplay after you turn on the machine. Here you will À nd all the basic information you need to start sewing. This is ...

[Page 23] Husqvarna Sapphire 875 Quilt

23 2 Operating the machine Sewing Mode, 855/875 Quilt Sewing Mode is the À rst view on the GraphicDisplay after you turn on the machine. Here you will À nd all the basic information you need to start sewing. This is also the menu where you adju...

[Page 24] Husqvarna Sapphire 875 Quilt

24 Operating the machine Selecting a stitch Press the Stitch Menu button to select a stitch menu. Use the arrow buttons to select among the menus: 1. Utility stitches 2. Quilt stitches 3. Decorative stitches 4. Decorative stitches U. My Stitches ...

[Page 25] Husqvarna Sapphire 875 Quilt

25 2 4. 6. Operating the machine Programming The Programming function on your machine makes it possible to create stitches with your own personal settings and to combine stitches and letters into stitch programs. You can add up to 40 stitches...

[Page 26] Husqvarna Sapphire 875 Quilt

26 Operating the machine Add stitches or letters at other positions If you wish to add a stitch or letter at another position in the program, move the cursor by pressing the arrow buttons. The stitch or letter will be inserted to the right of the...

[Page 27] Husqvarna Sapphire 875 Quilt

27 2 Operating the machine Adjust the entire stitch program Adjustments that affect the whole program and not just single stitches, are done in Sewing Mode. Press the PROG button to leave Programming Mode and switch to Sewing Mode. In Sewing Mod...

[Page 28] Husqvarna Sapphire 875 Quilt

28 Operating the machine My Stitches Menu My Stitches is your own personal menu where you can save and recall your programs or favorite stitches with personal settings. Model 835 has 10 memories, model 855 has 15 memories and model 875 Quilt ha...

[Page 29] Husqvarna Sapphire 875 Quilt

29 2 Operating the machine SET Menu You can change the pre-set machine settings and make manual adjustments to the automatic functions in the SET Menu. Open the menu by pressing the SET Menu button and select the setting you wish to adjust by...

[Page 30] Husqvarna Sapphire 875 Quilt

30 Operating the machine Twin needle If you are using a twin needle, set the size of the needle to limit the width of all stitches and prevent needle breakage. Activate or deactivate the twin needle function with the OK button and use the left/...

[Page 31] Husqvarna Sapphire 875 Quilt

31 2 Operating the machine Pop-up messages Bobbin winding on This pop-up message appears when the bobbin winding spindle is pushed to the right and bobbin winding is activated. Presser foot too high Your machine will not sew if there is too much ...

[Page 32] Husqvarna Sapphire 875 Quilt

32 Operating the machine Restart the buttonhole? If you are sewing a buttonhole and stop to adjust the length settings you will get this question once you start sewing again. If you select “Yes”, the machine will restart and sew the buttonhole...

[Page 33] Husqvarna Sapphire 875 Quilt

33 2 Operating the machine Main motor overload If you are sewing on very heavy fabric or if the machine is blocked when sewing, the main motor can get overloaded. The pop-up message will close when the main motor and power supply is secure. The...

[Page 34] Husqvarna Sapphire 875 Quilt

34 Operating the machine Woven fabric Knit fabric Fabric Selection WOVEN LIGHT: chiffon, organza, batiste, silk, wool challis, etc. WOVEN MEDIUM: calico, quilting fabrics, wool crepe, broadcloth, etc. WOVEN HEAVY: denim, wool suiting and coating,...

[Page 35] Husqvarna Sapphire 875 Quilt

35 3 Basic sewing techniques Seam A seam sews two pieces of fabric together with a seam allowance that usually will be pressed open. In most cases, edges of the seam allowance are À nished with an overcast stitch before sewing the seam. Seams ...

[Page 36] Husqvarna Sapphire 875 Quilt

36 Basic sewing techniques Overcast The three-step zigzag, is up to 1/4’’ (6mm) wide and suitable for all types of fabrics. Use this stitch for overcasting, butting two edges together to join them, mending tears and other special À nishing. ...

[Page 37] Husqvarna Sapphire 875 Quilt

37 3 Basic sewing techniquesBasic sewing techniques 1:7 Overcast Stitch Fabric: Stretch light or woven light/medium, cut in two. Select: Stretch light or woven light/medium fabric and Seam/ Overcast technique (The Exclusive SEWING ADVISOR™ featu...

[Page 38] Husqvarna Sapphire 875 Quilt

38 Basic sewing techniques Baste Basting is temporary stitching for À tting garments, gathering and marking. The Exclusive SEWING ADVISOR™ feature automatically sets a long stitch length and reduces the tension* so the threads are easy to rem...

[Page 39] Husqvarna Sapphire 875 Quilt

39 3 Basic sewing techniques Blind hem The blind hem creates an invisible hem on garments. There are two types of blind hem; one is recommended for medium to heavy stretch fabric, the other for medium to heavy woven fabric. Fold the fabric as illu...

[Page 40] Husqvarna Sapphire 875 Quilt

40 7 7 Basic sewing techniques Hem The Hem technique on your Exclusive SEWING ADVISOR™ feature will select the visible or topstitch hem that is best for your fabric weight and type. For woven fabric and leather and vinyl, a straight stitch is s...

[Page 41] Husqvarna Sapphire 875 Quilt

41 3 Basic sewing techniques Sewing buttonholes The buttonholes in your sewing machine are specially adjusted for different kinds of fabric and garments. Look at the stitch table on the last pages in this book to À nd descriptions of each button...

[Page 42] Husqvarna Sapphire 875 Quilt

42 Basic sewing techniques Manual Buttonholes A buttonhole can also be sewn step by step without the Sensor One-Step Buttonhole Foot connected. Use the reverse button to set the length of the buttonhole. 1. Snap on Presser Foot C. 2. Place the f...

[Page 43] Husqvarna Sapphire 875 Quilt

43 3 Basic sewing techniquesBasic sewing techniques Sewing on buttons Sew buttons, snaps, hooks and eyes quickly with your sewing machine. 1. Snap off the presser foot and lower the feed teeth. 2. Place the fabric, multipurpose tool/button reed...

[Page 44] Husqvarna Sapphire 875 Quilt

44 Basic sewing techniques Sewing zippers The Zipper Foot E can be snapped on either the right or the left of the needle, making it easy to sew both sides of the zipper. To sew the other side of the zipper, reposition the Zipper Foot. Move the ne...

[Page 45] Husqvarna Sapphire 875 Quilt

45 3 Basic sewing techniquesBasic sewing techniques Free Motion Quilting Free Motion Floating When sewing free motion at a low speed, the foot will raise and lower with each stitch to hold the fabric on the stitch plate while the stitch is being fo...

[Page 46] Husqvarna Sapphire 875 Quilt

46 Basic sewing techniques More Sewing Techniques Find instructions for many more sewing techniques on the HUSQVARNA VIKING® Internet web site. Enter www.husqvarnaviking.com and go to Sewing, Sewing Room, Sewing Techniques. Decorative Tapering Sti...

[Page 47] Husqvarna Sapphire 875 Quilt

47 4 1 2 A Taking care of the machine Changing the light bulbs Your sewing machine is equipped with two light bulbs. One is placed under the sewing head and one above the free arm. Only use light bulbs of a type as indicated on the front of the ...

[Page 48] Husqvarna Sapphire 875 Quilt

48 Taking care of the machine Trouble shooting Any time you experience a problem when sewing: • Select correct type and weight of fabric in the Exclusive SEWING ADVISOR™ feature. • Insert needle size and type as recommended on the Graphi...

[Page 49] Husqvarna Sapphire 875 Quilt

49 4 Taking care of the machine Machine Sews Slowly? • Check speed. • Remove stitch plate and brush lint from bobbin and teeth area. • Have your sewing machine serviced at your authorized HUSQVARNA VIKING® dealer. Machine Will Not Sew? �...

[Page 50] Husqvarna Sapphire 875 Quilt

50 Stitch table - menu 1. Utility Stitches Stitch Stitch no. Stitch name Presser Foot Application 835 855 875 000 Bartack Buttonhole Sensor One-Step Buttonh. Foot/C Standard buttonhole for most fabric weights. 111 Straight Stitch, center needle posi...

[Page 51] Husqvarna Sapphire 875 Quilt

51 Stitch Stitch no. Stitch name Presser Foot Application 835 855 875 19 19 19 Elastic Stitch or Smocking A/B Sew over two rows of elastic thread for elastic shirring. 20 20 20 Bridging stitch A/B For joining two pieces of fabric with À nished edg...

[Page 52] Husqvarna Sapphire 875 Quilt

52 SAPPHIRE™ 835 SAPPHIRE™ 875 Quilt SAPPHIRE™ 855 Stitch overview Menu 1: Utility Stitches, Menu 2: Quilt Stitches, Menu 3: Satin and Heirloom Stitches, Menu 4: Decorative Stitches Stitches 0-9 are the same in all four stitch menus. The stit...

[Page 53] Husqvarna Sapphire 875 Quilt

53 Brush Line (855/875 Quilt) Block (835/855/875 Quilt) Script (875 Quilt) Cyrillic and Hiragana Russian and Japanese alphabets. See the fonts on the GraphicDisplay of your sewing machine. Alphabets ...

[Page 54] Husqvarna Sapphire 875 Quilt

54 ...

[Page 55] Husqvarna Sapphire 875 Quilt

We reserve the right to change the machine equipment and the assortment of accessories without prior notice, or make modiÀ cations to the performance or design. Such modiÀ cations, however, will always be to the beneÀ t of the user and the pr...

[Page 56] Husqvarna Sapphire 875 Quilt

VSM Group AB • SE-561 84 Huskvarna, Sweden www.husqvarnaviking.com 413 22 72 - 26C • English • Inhouse • © 2009 KSIN Luxembourg II, S.ar.l. • All rights reserved • Printed in Sweden on environment friendly paper ...