Showtec LED Pixel Track User Manual

[Page 1] SHOWTEC LED Pixel Track

LED Pixel Track ORDERCODE 42200 ...

[Page 2] SHOWTEC LED Pixel Track

Congratulations! You have bought a great, innovative product from Showtec. The Showtec LED Pixel Track brings excitement to any venue. Whether you want simple plug-&-play action or a sophisticated DMX show, this product provides the effect you n...

[Page 3] SHOWTEC LED Pixel Track

1 2 2 3 3 4 4 4 4 5 5 5 5 5 6 6 7 8 9 9 9 10 Showtec Showtec LED Pixel Track™ Product Guide Warning..…...................................................................................…………………………………………. Safety-inst...

[Page 4] SHOWTEC LED Pixel Track

2 WARNING FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY BEFORE YOUR INITIAL START-UP! SAFETY INSTRUCTIONS Every person involved with the installation, operation and maintenance of this device has to: - be qualified - follow the instru...

[Page 5] SHOWTEC LED Pixel Track

3 • Make sure that the power-cord is never crimped or damaged. Check the device and the power-cord from time to time. • If device is dropped or struck, disconnect mains power supply immediately. Have a qualified engineer inspect for safety befo...

[Page 6] SHOWTEC LED Pixel Track

4 Description of the device Features The LED Pixel Track is a LED system from Showtec. • Sound-controlled via built-in microphone • 3 Modes: Stand-alone, DMX-controlled or Sound-controlled NOTE: Knowledge of DMX is required to fully utilize this ...

[Page 7] SHOWTEC LED Pixel Track

5 Installation Remove all packing materials from the LED Pixel Track. Check that all foam and plastic padding is removed. Connect all cables. Do not supply power before the whole system is set up and connected properly. Always disconnect from electri...

[Page 8] SHOWTEC LED Pixel Track

6 Stand-alone Operation Refer to the four buttons on the front panel of the LED Pixel Track: Mode F / S Up Down Press the MODE button to view the Chase menu: Select Chases 1-9 using the UP and DOWN buttons. Chases 1-8 run according to the Fade and Sp...

[Page 9] SHOWTEC LED Pixel Track

7 DMX Operation Press the MODE button to view the DMX address setting rnenu: Select the DMX starting address for the Pixel Drive 8 using the UP and DOWN buttons. The DMX Channel functions are: Channel 1: Rainbow Channel 2: Red (0-255) Channel 3: Gree...

[Page 10] SHOWTEC LED Pixel Track

8 DMX Modes Press the MODE button to view the DMX mode selection menu. Use the UP and DOWN buttons to select the DMX mode. DMX Mode 1 : 48-channel operation (Control each LED Pixel Track LED cluster separately) DMX Mode 2 : 2...

[Page 11] SHOWTEC LED Pixel Track

9 Maintenance The LED Pixel Track requires almost no maintenance. However, you should keep the unit clean. Disconnect the mains power supply, and then wipe the cover with a damp cloth. Do not immerse in liquid. Keep connections clean. Disconnect elec...

[Page 12] SHOWTEC LED Pixel Track

10 Product Specification Model: Showtec LED Pixel Track Voltage : AC 230V-50Hz (CE) Power: 115W Fuse: 250V / T1,5A Audio trigger: Built-in Mic DMX Input : 3-pin XLR Male connector DMX Output : 3-pin XLR Female connector Dimensions : 811 x 173 x 160 m...

[Page 13] SHOWTEC LED Pixel Track

2005 Showtec. ...