Barbas UNICA 50 Instructions For Use Manual

[Page 1] barbas UNICA 50

INSTRUCTIONS FOR USE INSTALLATION INSTRUCTIONS COUNTRY NATURAL GAS PROPANE GREAT-BRITAIN / IRELAND UNICA 50 NG UNICA 50 PG UNICA 52 NG UNICA 52 PG UNICA 65 NG UNICA 65 PG UNICA 70 NG UNICA 70 PG...

[Page 2] barbas UNICA 50

...

[Page 3] barbas UNICA 50

3 UNICA 70 UNICA 100UNICA 65UNICA 50 UNICA 52 CONTENTS 1. INSTRUCTIONS FOR USE...................................................... 2. INSTALLATION INSTRUCTIONS............................................... 3. MAINTENANCE.....................

[Page 4] barbas UNICA 50

4 UNICA 70UNICA 100 UNICA 65 UNICA 52 UNICA 50 ...

[Page 5] barbas UNICA 50

5 UNICA 70 UNICA 100UNICA 65UNICA 50 UNICA 52 1 INSTRUCTIONS FOR USE 1.1 INTRODUCTION Congratulations on your purchase of this modern BARBAS gas fi re. This quality product will provide you with many years of enjoyment due to the fl ame effect...

[Page 6] barbas UNICA 50

6 UNICA 70UNICA 100 UNICA 65 UNICA 52 UNICA 50 The fi lling of the main burner with embers, vermiculite granules and wood logs may not under any circumstances be changed or added to. Do not place easily-fl ammable material...

[Page 7] barbas UNICA 50

7 UNICA 70 UNICA 100UNICA 65UNICA 50 UNICA 52 Figure 1: Hand control 1.4 IGNITING THE FIRE l Open the gas supply valve in the gas pipe to the appliance. l Lock the slider into “l” position. l Turn the thermostat knob to the ignition positio...

[Page 8] barbas UNICA 50

8 UNICA 70UNICA 100 UNICA 65 UNICA 52 UNICA 50 1.5 TURNING OFF THE FIRE l Turn the thermostat knob to the ignition position “«”. l Lock the slider to the “l” position. The burner will now be fully extinguished. If the thermostat knob i...

[Page 9] barbas UNICA 50

9 UNICA 70 UNICA 100UNICA 65UNICA 50 UNICA 52 B A Figure 2: Operating switch 1.7.2 Igniting the fi re l Open the gas valve in the gas supply pipe to the appliance l Turn the control knob B to the position where the “big fl ame”-symbol is l...

[Page 10] barbas UNICA 50

10 UNICA 70UNICA 100 UNICA 65 UNICA 52 UNICA 50 1.7.3 Flame height The fl ame height of the main burner can now be adjusted by means of control knob B. Manually in approximately 20 steps or by means of the cordless remote control (continuous). Tu...

[Page 11] barbas UNICA 50

11 UNICA 70 UNICA 100UNICA 65UNICA 50 UNICA 52 Changing batteries signal Temperature display °C - °F Heating period P1 and P2 Time display Button High MAN Setting TIMER Setting TIME Button Low MAN Setting TIMER Setting TIME SENDsymbol AUTO TIMER...

[Page 12] barbas UNICA 50

12 UNICA 70UNICA 100 UNICA 65 UNICA 52 UNICA 50 1.7.5 Extinguishing the fi re Turn knob B, possibly with the remote control, fully to the right to the l symbol and/or turn the control knob A to the right until the stop (“small fl ame” symbol...

[Page 13] barbas UNICA 50

13 UNICA 70 UNICA 100UNICA 65UNICA 50 UNICA 52 1.7.10 MAN mode for manual fl ame height adjustment l Press to turn on the fi re (main burner) or to increase fl ame height. l Press to decrease fl ame height or to turn down the ma...

[Page 14] barbas UNICA 50

14 UNICA 70UNICA 100 UNICA 65 UNICA 52 UNICA 50 Important: If the pilot light goes out for any reason, wait for 5 minutes before attempting to re-light it. 1.7.15 Replacing the batteries The batteries of the hand-held transmitter and reciev...

[Page 15] barbas UNICA 50

15 UNICA 70 UNICA 100UNICA 65UNICA 50 UNICA 52 1.8 USING THE APPLIANCE FOR THE FIRST TIME The gas fi re is coated with a lacquer layer resistant to high temperature. During the fi rst hours of operation, the burning in of the lacquer may result i...

[Page 16] barbas UNICA 50

16 UNICA 70UNICA 100 UNICA 65 UNICA 52 UNICA 50 2 INSTALLATION INSTRUCTIONS 2.1 GENERAL The gas fi re must be positioned and connected as a “open” appliance by a CORGI registered installation engineer in accordance with the following insta...

[Page 17] barbas UNICA 50

17 UNICA 70 UNICA 100UNICA 65UNICA 50 UNICA 52 2.3 PREPARATIONS BEFORE INSTALLATION Before installing the appliance, fi rst observe the following instructions. 2.3.1 The most important facilities according to the regulations: 1 NATURALLY VENTILA...

[Page 18] barbas UNICA 50

18 UNICA 70UNICA 100 UNICA 65 UNICA 52 UNICA 50 2 MECHANICALLY VENTILATED HOUSE (see Figure 7) l The room in which the appliance is to be fi tted must have a non- closable combustion air supply opening. The minimum dimensions are de...

[Page 19] barbas UNICA 50

19 UNICA 70 UNICA 100UNICA 65UNICA 50 UNICA 52 2.4 GENERAL SERVICES 1. UNPACKING THE APPLIANCE The appliance is fi tted with two “carrying handles” at the top. If required, they may be removed during installation. 2. FRAME ...

[Page 20] barbas UNICA 50

20 UNICA 70UNICA 100 UNICA 65 UNICA 52 UNICA 50 2.5 POSITIONING THE APPLIANCE Important: l Never use combustible materials during the installation. l Insulate the gas fi re using white loose insulation wool (heat r...

[Page 21] barbas UNICA 50

21 UNICA 70 UNICA 100UNICA 65UNICA 50 UNICA 52 Position the thermostat sensor at the left-or right hand side underneath the frame, or at the height of the plinth. See Paragraphe 2.5.3 for fi tting the log set. Check that all connections are complet...

[Page 22] barbas UNICA 50

22 UNICA 70UNICA 100 UNICA 65 UNICA 52 UNICA 50 3. Dismantling the frame: When necessary, the 50 mm frame can be removed (Unica 50: 32 mm). Unica 50 : Loosen the screws underneath at the left-and right hand side, Unica 70 at the inside of...

[Page 23] barbas UNICA 50

23 UNICA 70 UNICA 100UNICA 65UNICA 50 UNICA 52 Figure 8: Unica 50 / Unica 70 / Unica 100 Unica 52 : Dismantle the entire inner shell by slightly loosening the 4 Unica 65 nuts at the front. Next, turn the adjustment bolt downwards at ...

[Page 24] barbas UNICA 50

24 UNICA 70UNICA 100 UNICA 65 UNICA 52 UNICA 50 10. The fl ue spigot can be removed by loosening the self-tapping screws from the inside of the outer casing. The appliance is now fully dismantled. Figure 9: Unica 52 / Unica 65 Front Flue spig...

[Page 25] barbas UNICA 50

25 UNICA 70 UNICA 100UNICA 65UNICA 50 UNICA 52 Installing the gas fi re insert should be carried out in the following order: 1. FITTING THE OUTER CASING Place the outer casing into the fi replace opening. Using the supplied frame, position the �...

[Page 26] barbas UNICA 50

26 UNICA 70UNICA 100 UNICA 65 UNICA 52 UNICA 50 2. FITTING THE INNER SHELL Before assembly, check that the sealing cords of the fl ue spigot and glass are still intact. Unica 50 : Hook the complete inner shell onto the hinge points at the top Un...

[Page 27] barbas UNICA 50

27 UNICA 70 UNICA 100UNICA 65UNICA 50 UNICA 52 The mains electricity can now be restored to the wall socket. (Only applicable if the appliance is provided with a convection fan.) Check that all connections are completely gas tight using soapy water o...

[Page 28] barbas UNICA 50

28 UNICA 70UNICA 100 UNICA 65 UNICA 52 UNICA 50 Figure 10: Log set UNICA 50 NATURAL GAS-appliance Position of embers, vermiculite granules and logs on burner UNICA 50: POSITIONING THE CERAMIC LOG SET: NATURAL GAS-APPLIANCE: Unica 50 N... ...

[Page 29] barbas UNICA 50

29 UNICA 70 UNICA 100UNICA 65UNICA 50 UNICA 52 PROPANE-APPLIANCE: Unica 50 P... 1. Carefully remove the embers (1x 125 gram) from the packaging and place them evenly on and around the burner (not on the holes!). Please make sure that all b...

[Page 30] barbas UNICA 50

30 UNICA 70UNICA 100 UNICA 65 UNICA 52 UNICA 50 UNICA 52: POSITIONING THE CERAMIC LOG SET: NATURAL GAS-APPLIANCE: Unica 52 N... Evenly distribute the vermiculite granules over the burner. Place the rear log set; no , in the holder behind the burne...

[Page 31] barbas UNICA 50

31 UNICA 70 UNICA 100UNICA 65UNICA 50 UNICA 52 UNICA 65 / UNICA 70: POSITIONING THE CERAMIC LOG SET: NATURAL GAS-APPLIANCE: Unica 65 N... / Unica 70 N... Evenly distribute the vermiculite granules over the burner. Place the rear log set; no ,...

[Page 32] barbas UNICA 50

32 UNICA 70UNICA 100 UNICA 65 UNICA 52 UNICA 50 UNICA 100: POSITIONING THE CERAMIC LOG SET: NATURAL GAS-APPLIANCE: Unica 100 N... 1. Carefully remove the embers (2 x125 gram) from the packaging and place them evenly on the burner. Note ! Sma...

[Page 33] barbas UNICA 50

33 UNICA 70 UNICA 100UNICA 65UNICA 50 UNICA 52 Figure 15: UNICA 100 NATURAL GAS-appliance Position of embers and logs on burner PROPANE-APPLIANCE: Unica 100 P... 1. Carefully remove the embers (1 x125 gram) from the packaging and p...

[Page 34] barbas UNICA 50

34 UNICA 70UNICA 100 UNICA 65 UNICA 52 UNICA 50 Figure 16: UNICA 100 PROPANE-appliance Position of embers on burner Figure 17: UNICA 100 PROPANE-appliance Position of embers and logs on burner Positioning the rear logs The carbon si...

[Page 35] barbas UNICA 50

35 UNICA 70 UNICA 100UNICA 65UNICA 50 UNICA 52 6. FITTING THE FRONT, DOOR AND GLASS (WEAR PROTECTIVE GLOVES !!!) Unica 50 : First position the glass into the glass support plate at the bottom or Unica 70 the combustion chamber. Push the ...

[Page 36] barbas UNICA 50

36 UNICA 70UNICA 100 UNICA 65 UNICA 52 UNICA 50 3 MAINTENANCE 3.1 ANNUAL MAINTENANCE It is essential that the appliance, the chimney and the burner air intake are cleaned and inspected annually by a recognised fi tter/gas special...

[Page 37] barbas UNICA 50

37 UNICA 70 UNICA 100UNICA 65UNICA 50 UNICA 52 4 FAULTS Possible reasons for the gas fi re going out are: l Operation of the thermal one-way protection safety system due to fl ue gas escape. l Malfunction of the thermal one-way protection...

[Page 38] barbas UNICA 50

38 UNICA 70UNICA 100 UNICA 65 UNICA 52 UNICA 50 5 ELECTRICAL DIAGRAM blue brown yellow/green brown brown brown blue yellow/green Fanspeed controller convection-fan 230 VAC / 50 Hz Convection-fan 230 VAC / 50 Hz Thermostat “Clickson” set at ± ...

[Page 39] barbas UNICA 50

39 UNICA 70 UNICA 100UNICA 65UNICA 50 UNICA 52 6 DIMENSIONS 6.1 UNICA 50 Gas connection ...

[Page 40] barbas UNICA 50

40 UNICA 70UNICA 100 UNICA 65 UNICA 52 UNICA 50 6.2 UNICA 52 Gas connection 525 (fi xed frame) (fi xed frame) ...

[Page 41] barbas UNICA 50

41 UNICA 70 UNICA 100UNICA 65UNICA 50 UNICA 52 6.3 UNICA 65 Gas connection (fi xed frame) (fi xed frame) ...

[Page 42] barbas UNICA 50

42 UNICA 70UNICA 100 UNICA 65 UNICA 52 UNICA 50 6.4 UNICA 70 (fi xed frame) Plateau (fi xed frame) Gas connection ...

[Page 43] barbas UNICA 50

43 UNICA 70 UNICA 100UNICA 65UNICA 50 UNICA 52 6.5 UNICA 100 (fi xed frame) (fi xed frame) Gas connection ...

[Page 44] barbas UNICA 50

44 UNICA 70UNICA 100 UNICA 65 UNICA 52 UNICA 50 7 TECHNICAL DETAILS / REGULATIONS 7.1 Technical details; NG; NATURAL GAS - GREAT BRITAIN / IRELAND PG; PROPANE - GREAT BRITAIN / IRELAND National Installation Regulations: Gas ...

[Page 45] barbas UNICA 50

45 UNICA 70 UNICA 100UNICA 65UNICA 50 UNICA 52 Model : UNICA 52 NG : UNICA 52 PG Country : GB; Great Britain / IE; Ireland : GB; Great Britain / IE; Ireland Product identifi cation no : 0063 AU 3899 : 0063 AU 3...

[Page 46] barbas UNICA 50

46 UNICA 70UNICA 100 UNICA 65 UNICA 52 UNICA 50 Model :UNICA 65 NG :UNICA 65 PG UNICA 70 NG UNICA 70 PG Country : GB; Great Britain / IE; Ireland : GB; Great Britain / IE; Ireland Product identifi cation no :...

[Page 47] barbas UNICA 50

47 UNICA 70 UNICA 100UNICA 65UNICA 50 UNICA 52 Model : UNICA 100 NG : UNICA 100 PG Country : GB; Great Britain / IE; Ireland : GB; Great Britain / IE; Ireland Product identifi cation no : 0063 AU 3899 : 0063 AU 3899 Type of appl...

[Page 48] barbas UNICA 50

48 UNICA 70UNICA 100 UNICA 65 UNICA 52 UNICA 50 8 REPLACEMENT PARTS LIST When requesting service or ordering replacement parts, please quote the model type and serial number. All parts listed in this manual may be ordered from a Barbas dealer. 8...

[Page 49] barbas UNICA 50

49 UNICA 70 UNICA 100UNICA 65UNICA 50 UNICA 52 No Part no Description Hand Remote control control 27 301617 Black fi bre glass cord...

[Page 50] barbas UNICA 50

50 UNICA 70UNICA 100 UNICA 65 UNICA 52 UNICA 50 8.2 UNICA 52 No Part no Description Hand Remote control control 1 302056 Gas regulator ...

[Page 51] barbas UNICA 50

51 UNICA 70 UNICA 100UNICA 65UNICA 50 UNICA 52 No Part no Description Hand Remote control control 33 301669 Tube ceramic glue 34 301845 L...

[Page 52] barbas UNICA 50

52 UNICA 70UNICA 100 UNICA 65 UNICA 52 UNICA 50 8.3 UNICA 65 / UNICA 70 No Part no Description Hand Remote control control 1 302056 Gas re...

[Page 53] barbas UNICA 50

53 UNICA 70 UNICA 100UNICA 65UNICA 50 UNICA 52 No Part no Description Hand Remote control control 32 301607 Black fi bre glas...

[Page 54] barbas UNICA 50

54 UNICA 70UNICA 100 UNICA 65 UNICA 52 UNICA 50 8.4 UNICA 100 No Part no Description Hand Remote control control 1 302056 Gas regulato...

[Page 55] barbas UNICA 50

55 UNICA 70 UNICA 100UNICA 65UNICA 50 UNICA 52 ...

[Page 56] barbas UNICA 50

04 - 010507 - 303430 INTERFOCOS B.V. HALLENSTRAAT 17 5531 AB BLADEL NEDERLAND E-mail: [email protected] Internet: www.barbas.com ...