Meiji Techno EMZ-2 Instruction Manual

[Page 1] Meiji Techno EMZ-2

...

[Page 2] Meiji Techno EMZ-2

NOMENCLATURE AND FUNCTION UNPACKING, ASSEMBLY, PREPARATION FOR USE Unpacking Assembly OPERATING PROCEDURES How to Operate Illuminators Focusing Capability Precise Focus On Specimen Focusing Procedure PHOTOGRAPHY AND TELEVISION Photography Camera Oper...

[Page 3] Meiji Techno EMZ-2

NOMENCLATURE AND FUNCTION MEIJI EMZ Series ZOOM STEREO MICROSCOPE Photo Tube Photo Tube Lever for switching the image from one of the binocular eyepieces vertically up to the film plane Stage Plate Set Screw Base with Transformer and Trans...

[Page 4] Meiji Techno EMZ-2

Zoom Control Ring Clamp Screw Set Screw Model EMZ-2 with SWF10X mounted on P Stand 3 EMZ-9 Zoom Stereo Body Eyetube Inclination : 60 Z-7100 Zoom Stereo Body Eyetube Inclination : 90 ...

[Page 5] Meiji Techno EMZ-2

UNPACKING All MEIJI TECHNO microscopes are usually supplied in an expanded polystyrene, 2-part case and this should be used for storage, possible transport in the future, etc. If your order includes a wooden storage cabinet, release the fixing scr...

[Page 6] Meiji Techno EMZ-2

FOCUSING CAPABILITY The Pole-type focusing stands have a double focusing capability, i.e. Rough Focus (by sliding the whole focus assembly and zoom body up and down on the pillar, fixing the clamp screw when in approximate focus on your specimen),...

[Page 7] Meiji Techno EMZ-2

6 FOCUSING PROCEDURE The whole point of stereoscopic microscopes is that, when properly adjusted, the observer sees the object image in three dimensions and can perceive height and depths on the specimen. This is a great advantage in material exam...

[Page 8] Meiji Techno EMZ-2

7 0.7X Finally it is necessary to adjust, so focus remains sharp through the whole range of zoom magnification and so that the image is seen equally sharply focused in both right and left-hand eyepieces. (1) (2) (3) (4) (5) (6) Set microscope magnif...

[Page 9] Meiji Techno EMZ-2

8 TELEVISION For television the MA 151/5N (EMZ-TR) "C" Mount Adaptor should be used, threaded into your TV camera, then placed and adjusted on the upper portion of your trinocular body. Adjustment can then proceed a per paragraph (3) above...

[Page 10] Meiji Techno EMZ-2

9 BULB REPLACEMENT When changing light bulbs in the illuminators, always disconnect the plug from the electrical source. Never work on the electrical system without first disconnecting. When a bulb replacement is necessary in the Incident Illuminato...

[Page 11] Meiji Techno EMZ-2

EM Series SYSTEM DIAGRAM ZOOM MODELS Photo/Video attachments are show in Page 13 MA569 Clear glass stage plate MA569 Clear glass stage plate MA567 Acrylic frosted stage plate MA567 Acrylic frosted stage plate MA568 B/W Plastic stage plate MA551 ...

[Page 12] Meiji Techno EMZ-2

MA667 Polarizing Plate (Polarizer) KBL Pole type w/illuminater port on flat base KBE Rigid-extendable arm on flat base MA569 Clear glass stage plate MA569 Clear glass stage plate MA569 Clear glass stage plate MA569 Clear glass stage plate MA567 A...

[Page 13] Meiji Techno EMZ-2

12 EM Series SYSTEM DIAGRAM SPECIAL STANDS S-4100 w/400mm Pole S-4200 w/610mm Pole S-4300 w/400mm Pole S-4400 w/610mm Pole S-4500 w/400mm Pole FX Holder w/illuminator port FS Holder w/illuminator port for bonding machine FC Holder w/coaxial coares an...

[Page 14] Meiji Techno EMZ-2

13 CK3900N or CK3900P CCD Camera MK300N or MK300P B/W CCD Camera CK3900N or CK3900P CCD Camera MK300N or MK300P B/W CCD Camera "C"Mounts* MA151/5N MA150 / 50 Camera Attachment 35mm SLR Camera Body T2 Adapter T2-1 Canon T2-2 Minolta T2-...

[Page 15] Meiji Techno EMZ-2

...