Miele KM 6325-1 Operating And Installation Instructions

[Page 1] Miele KM 6325-1

Operating and installation instructions Ceramic hobs with induction To avoid the risk of accidents or damage to the appliance it is essential to read these instructions before it is installed and used for the first time. en-GB M.-Nr. 10 023 510 ...

[Page 2] Miele KM 6325-1

Contents 2 Warning and Safety instructions .......................................................................... 4 Caring for the environment ................................................................................. 13 Overview ..........

[Page 3] Miele KM 6325-1

Contents 3 Problem solving guide......................................................................................... 35 Optional accessories........................................................................................... 38 Miele@home...

[Page 4] Miele KM 6325-1

Warning and Safety instructions 4 This hob complies with all relevant safety requirements. Inappro‐ priate use can, however, lead to personal injury and damage to property. To avoid the risk of accidents and damage to the appliance, please read the...

[Page 5] Miele KM 6325-1

Warning and Safety instructions 5 Correct application  This hob is intended for domestic use and use in other similar en‐ vironments.  This hob is not intended for outdoor use.  It is intended for domestic use only to cook food and keep it...

[Page 6] Miele KM 6325-1

Warning and Safety instructions 6 Safety with children  Children under 8 years of age must be kept away from the hob unless they are constantly supervised.  Children 8 years and older may only use the hob unsupervised if they have been shown ho...

[Page 7] Miele KM 6325-1

Warning and Safety instructions 7 Technical safety  Unauthorised installation, maintenance and repairs can cause considerable danger for the user. Installation, maintenance and re‐ pairs must only be carried out by a Miele authorised technician....

[Page 8] Miele KM 6325-1

Warning and Safety instructions 8  Miele can only guarantee the safety of the appliance when genu‐ ine original Miele replacement parts are used. Faulty components must only be replaced by Miele spare parts.  The hob is not intended for use w...

[Page 9] Miele KM 6325-1

Warning and Safety instructions 9 Correct use  The hob gets hot when in use and remains hot for a while after being switched off. There is a danger of burning until the residual heat indicators go out.  Due to the high temperatures radiated, ob...

[Page 10] Miele KM 6325-1

Warning and Safety instructions 10  You could burn yourself on the hot hob. Protect your hands with heat-resistant pot holders or gloves when handling hot pots and pans. Do not let them get wet or damp, as this causes heat to trans‐ fer through ...

[Page 11] Miele KM 6325-1

Warning and Safety instructions 11  Induction heating works extremely quickly and so the base of the pan could heat up to the temperature at which oil or fat self-ignites within a very short time. Do not leave the hob unattended whilst it is being...

[Page 12] Miele KM 6325-1

Warning and Safety instructions 12 Cleaning and care  Do not use a steam cleaning appliance to clean this hob. The steam could reach electrical components and cause a short cir‐ cuit.  If the hob is built in over a pyrolitic oven, the hob sh...

[Page 13] Miele KM 6325-1

Caring for the environment 13 Disposal of the packing mate‐ rial The packaging is designed to protect the appliance from damage during transportation. The packaging materials used are selected from materials which are environmentally friendly for d...

[Page 14] Miele KM 6325-1

Overview 14 Hob KM 6325-1 a PowerFlex cooking zone with TwinBooster b PowerFlex cooking zone with TwinBooster ab can be combined to form a PowerFlex cooking area c Cooking zone with Booster d Cooking zone with Booster e Display with cooking...

[Page 15] Miele KM 6325-1

Overview 15 KM 6362-1 / KM 6363-1 / KM 6364-1 a Cooking zone with WaterBoost b Cooking zone with Booster c PowerFlex cooking zone with TwinBooster d PowerFlex cooking zone with TwinBooster cd can be combined to form a PowerFlex cooking area ...

[Page 16] Miele KM 6325-1

Overview 16 Control symbols Symbol Description 0 Cooking zone off  Keeping warm setting  For switching on the PowerFlex cooking area B Booster level 1 B I/II TwinBooster/WaterBoost with 2 levels  Cooking zone selection, example: front left H...

[Page 17] Miele KM 6325-1

Overview 17 Cooking zones Cooking zone KM 6325-1 Ø in cm* Rating in watts for 230 V**  15–23 Normal TwinBooster, level 1 TwinBooster, level 2 2100 3000 3650  15–23 Normal TwinBooster, level 1 TwinBooster, level 2 2100 3000 3650  14–20...

[Page 18] Miele KM 6325-1

Overview 18 Cooking zone KM 6362-1 / 6363-1 / 6364-1 Ø in cm* Rating in watts for 230 V**  10–23 Normal WaterBoost, level 1 WaterBoost, level 2 2300 3200 5000  14–20 Normal Booster 1850 3000  15–23 Normal TwinBooster, level 1 TwinBoos...

[Page 19] Miele KM 6325-1

Before using for the first time 19  Please stick the extra data plate for the appliance supplied with this doc‐ umentation in the space provided in the "After sales service, data plate, guarantee" section of this booklet.  Remove an...

[Page 20] Miele KM 6325-1

Induction 20 The induction principle An induction coil is located under each cooking zone. When a cooking zone is switched on, this coil creates a magnet‐ ic field which impacts directly on the base of the pan and heats it up. The cooking zone itse...

[Page 21] Miele KM 6325-1

Induction 21 Noises When using an induction cooking zone, the following noises can occur in the pan, depending on what it is made of and how it has been constructed. On the higher power settings, it might buzz. This will decrease or cease alto‐ get...

[Page 22] Miele KM 6325-1

Induction 22 Pans The following pan types are suitable: – Stainless steel with a base that can be magnetised, – enamelled steel, – cast iron. The following pan types are not suita‐ ble: – Stainless steel pans without a mag‐ netic base, �...

[Page 23] Miele KM 6325-1

Tips on saving energy 23 – Use a lid whenever possible to mini‐ mise heat loss. – Select a smaller pan when cooking small quantities. A smaller pan uses less energy than a larger pan with very little in it. – Cook with as little water as poss...

[Page 24] Miele KM 6325-1

Power level range 24 Setting range Keeping warm h Melting butter Dissolving gelatine Melting chocolate 1-2 Making milk puddings 2 Warming small quantities of liquid Cooking rice 3 Defrosting frozen vegetables 3 Making porridge 3 Warming liquid and se...

[Page 25] Miele KM 6325-1

Operation 25  Fire hazard. Do not leave the hob unattended whilst it is being used. Please note that the heating up time on induction hobs is very much shorter than on conventional hobs. Cooking zone rotary controls The cooking zone rotary control...

[Page 26] Miele KM 6325-1

Operation 26 PowerFlex cooking area The PowerFlex cooking zones can be combined to form a PowerFlex cooking area (see "Guide to the appliance - Hob"). Settings for the cooking area are controlled by the front PowerFlex cook‐ ing zone. Swi...

[Page 27] Miele KM 6325-1

Operation 27 Auto heat-up When Auto heat-up has been activated, the cooking zone switches on automati‐ cally at the highest power setting and then switches to the continued cooking setting. The heat-up time depends on which continued cooking settin...

[Page 28] Miele KM 6325-1

Operation 28 Booster The cooking zones are equipped with a one stage Booster, two stage Water‐ Boost or TwinBooster (see "Guide to the appliance - Hob"). When activated, the power is boosted for a maximum of 15 minutes so that large quant...

[Page 29] Miele KM 6325-1

Operation 29 To switch on the Booster  Turn the rotary control clockwise gen‐ tly past the point of resistance to B and back to the point of resistance.  will appear in the cooking zone dis‐ play. Switching on WaterBoost / Twin‐ Booster, ...

[Page 30] Miele KM 6325-1

Operation 30 Keeping warm The keeping warm function is for keeping food that has just been cooked warm, i.e. food that is still hot. It is not for reheating food that has gone cold. If the keeping warm function has been activated, the cooking zone wi...

[Page 31] Miele KM 6325-1

Safety features 31 System lock The system lock is deactivated if there is an interruption to the power supply. The system lock can only be activated if all the cooking zones are switched off. Your hob is equipped with a system lock to prevent the coo...

[Page 32] Miele KM 6325-1

Safety features 32 Overheating protection All the induction coils and cooling ele‐ ments for the electronics are fitted with an overheating protection mechanism. Before the induction coils or cooling el‐ ements get too hot, the overheating protec...

[Page 33] Miele KM 6325-1

Cleaning and care 33  Danger of burning. The cooking zones must be switch‐ ed off. The hob must have cooled down.  Danger of injury. The steam from a steam cleaning appliance could reach electrical components and cause a short cir‐ cuit. Do...

[Page 34] Miele KM 6325-1

Cleaning and care 34 Ceramic surface Do not clean the area between the glass-ceramic surface and the frame or the frame and the worktop with sharp, pointed objects. This could damage to the seals. Do not use washing-up liquid to clean the appliance a...

[Page 35] Miele KM 6325-1

Problem solving guide 35 With the aid of the following guide, minor problems can be easily corrected with‐ out contacting Miele. If having followed the suggestions below, you still cannot resolve the problem, please contact Miele (see end of this b...

[Page 36] Miele KM 6325-1

Problem solving guide 36 Problem Cause and remedy After the hob has been switched on  appears in the display for a few seconds. The cooking zones do not heat up. Demonstration mode is activated.  Turn the rotary control for the front left ...

[Page 37] Miele KM 6325-1

Problem solving guide 37 Problem Cause and remedy  is flashing in the display of one or more cooking zones. The rotary control for the cooking zone has been turned to the point of resistance clockwise or anti- clockwise for longer than 30 seconds....

[Page 38] Miele KM 6325-1

Optional accessories 38 Miele offer a comprehensive range of useful accessories as well as cleaning and conditioning products for your Miele appliances. These can be ordered online at: or from Miele (see end of this booklet for contact details). Pans...

[Page 39] Miele KM 6325-1

Miele@home / Con@ctivity 39 Your hob is communication-enabled and via the stick supplied with selected cooker hoods can – be connected to the Miele@home system, – communicate with the cooker hood (Con@ctivity). Miele@home system Communication-ena...

[Page 40] Miele KM 6325-1

Miele@home / Con@ctivity 40 Signing on If you want to sign the hob – on to the Miele@home system, first prepare the signing on procedure on the master (display) appliance. – on to the Con@ctivity system, first sign on the cooker hood.  Disconn...

[Page 41] Miele KM 6325-1

Safety instructions for installation 41  The appliance must only be installed and connected to the electricity sup‐ ply by a suitably qualified and competent person in strict accordance with cur‐ rent national and local safety regulations. Fit...

[Page 42] Miele KM 6325-1

Safety distances 42 Safety distance above the hob A minimum safety distance must be maintained between the appliance and the cooker hood above it. See the cooker hood manufacturer's operating and installation instructions for details. If the man...

[Page 43] Miele KM 6325-1

Safety distances 43 Safety distances to the sides and back of the hob Ideally the hob should be installed with plenty of space on either side. There may be a wall at the rear or a tall unit or wall on one side (right or left) (see illus‐ trations)....

[Page 44] Miele KM 6325-1

Safety distances 44 Minimum safety distances un‐ derneath the hob To ensure sufficient ventilation to the hob, a certain gap must be left between the underside of the hob and any oven, interim shelf or drawer. The minimum gap between the under‐ s...

[Page 45] Miele KM 6325-1

Safety distances 45 Safety distance when installing the appliance near a wall with additional niche cladding A minimum safety distance must be maintained between the worktop cut-out and any niche cladding to protect it from heat damage. If the niche ...

[Page 46] Miele KM 6325-1

Hob with frame or bevelled edge 46 Installation notes Seal between the hob and the work‐ top Do not use sealant between the hob and the worktop. This could result in damage to the hob or the worktop if the hob ever needs to be removed for servicing...

[Page 47] Miele KM 6325-1

Hob with frame or bevelled edge 47 Building-in dimensions KM 6325-1 a Front b Casing depth c Mains connection box d Miele@home/Con@ctivity connection The mains connection cable (1440 mm long) is supplied separately with the hob. ...

[Page 48] Miele KM 6325-1

Hob with frame or bevelled edge 48 KM 6362-1 a Front b Casing depth c Mains connection box d Miele@home/Con@ctivity connection The mains connection cable (1440 mm long) is supplied separately with the hob. ...

[Page 49] Miele KM 6325-1

Hob with frame or bevelled edge 49 KM 6363-1 a Front b Casing depth c Mains connection box d Miele@home/Con@ctivity connection The mains connection cable (1440 mm long) is supplied separately with the hob. ...

[Page 50] Miele KM 6325-1

Hob with frame or bevelled edge 50 Installation Preparing the worktop  Make the worktop cut-out as shown in the building-in diagram. Observe the safety distances (see "Safety dis‐ tances").  Seal the cut surfaces with a suitable sea...

[Page 51] Miele KM 6325-1

Flush-fitted hobs 51 Installation notes Flush fit hobs are only suitable for in‐ stallation in natural stone (granite, marble), tiled or solid wood worktops. Certain models are suitable for build‐ ing into glass worktops - please see advice under...

[Page 52] Miele KM 6325-1

Flush-fitted hobs 52 Building-in dimensions KM 6364-1 a Front b Casing depth c Mains connection box d Stepped cut-out e Miele@home/Con@ctivity connec‐ tion The mains connection cable (1440 mm long) is supplied separately with the hob. Ple...

[Page 53] Miele KM 6325-1

Flush-fitted hobs 53 Installation Natural stone worktops a Worktop b Hob c Gap As the ceramic glass and the worktop cut-out have a certain dimensional tol‐ erance, the size of gap  can vary (min. 1 mm). d Stepped cut-out Solid wood, tile...

[Page 54] Miele KM 6325-1

Flush-fitted hobs 54 Preparing the worktop  Make the worktop cut-out as shown in "Building-in dimensions". Observe the safety distances (see "Safety dis‐ tances").  Solid wood, tiled and glass worktops: Fix the wooden fram...

[Page 55] Miele KM 6325-1

Electrical connection 55  Danger of injury. Miele cannot be held liable for unau‐ thorised installation, maintenance and repair work as this can be dan‐ gerous to users. Miele cannot be held liable for dam‐ age or injury caused by incorrect...

[Page 56] Miele KM 6325-1

Electrical connection 56 Disconnecting from the mains  Danger of electrical shock. After disconnection, ensure the ap‐ pliance cannot be switched back on by mistake. To disconnect the appliance from the mains power supply, do one of the fol‐ l...

[Page 57] Miele KM 6325-1

Electrical connection 57 Wiring diagram L1 200-240 V~ 200-240 V~ 200-240 V~ ab cde - L2 L3 N - L2 b L1 a cd N e (L3) 200-240 V~ 200-240 V~ a L1 bcd N e - (L2) 200-240 V~ ...

[Page 58] Miele KM 6325-1

After sales service, data plate, guarantee 58 After sales service In the event of any faults which you cannot easily remedy, please contact – your Miele Dealer, or – Miele See end of this booklet for contact details. When contacting your Dealer o...

[Page 59] Miele KM 6325-1

United Kingdom Miele Co. Ltd. Fairacres, Marcham Road Abingdon, Oxon, OX14 1TW Customer Contact Centre Tel: 0330 160 6600 E-mail: [email protected] Internet: www.miele.co.uk Australia Miele Australia Pty. Ltd. ACN 005 635 398 ABN 96 005 635 398 1...

[Page 60] Miele KM 6325-1

M.-Nr. 10 023 510 / 00en-GB KM 6325-1 / KM 6362-1 / KM 6363-1 / KM 6364-1  ...