TV One C2-6204 Operation Manual

Download or browse on-line these Operation Manual for TV One C2-6204 Receiver.

TV One C2-6204 Manual Information:

This manual for TV One C2-6204, given in the PDF format, is available for free online viewing and download without logging on. The guide contains 105 pages, and the size of the file at download is . The document type is Operation Manual.

Download Manual

Summary of Contents:

[Page 1] TV One C2-6204

C2-6204 SERIES OPERATION MANUAL C2-6204 Video Processor Operation Manual ...

[Page 2] TV One C2-6204

C2-6204 SERIES OPERATION MANUAL TABLE OF CONTENTS 1 DISCLAIMER ................................................................................................ 1 1.1 Regulatory Agency Acceptance...........................................................

[Page 3] TV One C2-6204

C2-6204 SERIES OPERATION MANUAL 8.3.1 Extended scaling controls.................................................................................. 38 8.3.2 ‘Aspect adjust’ = ‘Advanced’..............................................................

[Page 4] TV One C2-6204

C2-6204 SERIES OPERATION MANUAL 10.6.2 Adjustment: ....................................................................................................... 87 11 TROUBLESHOOTING AND TECHNICAL SUPPORT ................................ 89 11.1 There is n...

[Page 5] TV One C2-6204

C2-6204 SERIES OPERATION MANUAL 15.14 Optional Accessories.........................................................................................99 16 CONTACT INFORMATION....................................................................... 100 ...

[Page 6] TV One C2-6204

C2-6204 SERIES OPERATION MANUAL 1 1 DISCLAIMER This product is intended for professional and/or home use. This product is not intended for use in a medical environment and does not have the required certifications for such use. Similarly, use aboar...

[Page 7] TV One C2-6204

C2-6204 SERIES OPERATION MANUAL 2 Caution: This equipment is intended for use in the manner prescribed in the Instruction Manual. Any user changes or modifications not expressly approved by TV One Multimedia Solutions could void the user’s autho...

[Page 8] TV One C2-6204

C2-6204 SERIES OPERATION MANUAL 3 2 IMPORTANT SAFETY INSTRUCTION To insure the best from this product, please read this manual carefully.  Read these instructions  Keep these Instructions  Heed all warnings  Follow all instructions  Do...

[Page 9] TV One C2-6204

C2-6204 SERIES OPERATION MANUAL 4 If you did not receive the correct plug, DO NOT attempt to modify it. Instead, immediately contact your dealer or contact TV One at the sales office nearest to your geographic location and request the proper plug. ...

[Page 10] TV One C2-6204

C2-6204 SERIES OPERATION MANUAL 5 2 CONSIGNE IMPORTANTE DE SECURITE Pour obtenir les meilleures performances avec ce produit, nous vous demandons de lire soigneusement ce manuel.  Lisez ces consignes  Conservez ces consignes  Respectez tous...

[Page 11] TV One C2-6204

C2-6204 SERIES OPERATION MANUAL 6 ! AVERTISSEMENT Pour réduire tout risque d'incendie ou de choc électrique, n'exposez pas cet appareil à la pluie ou à une humidité.  Le câble d'alimentation secteur ou l'adaptateur rem...

[Page 12] TV One C2-6204

C2-6204 SERIES OPERATION MANUAL 7 2 WICHTIGE SICHERHEITSANWEISUNGEN Lesen Sie diese Bedienungsanleitung sorgfältig, um zu gewährleisten, dass Sie den optimalen Nutzen aus diesem Produkt ziehen.  Lesen Sie diese Anweisungen.  Bewahren Sie die...

[Page 13] TV One C2-6204

C2-6204 SERIES OPERATION MANUAL 8 ! WARNUNG: Setzen Sie das Gerät weder Regen noch Feuchtigkeit aus, um die Gefahr eines Brandes oder elektrischen Schlags zu minimieren.  Das mitgelieferte Netzkabel oder der mitgelieferte Adapter müssen dem i...

[Page 14] TV One C2-6204

C2-6204 SERIES OPERATION MANUAL 9 2 INSTRUCCIONES IMPORTANTES DE SEGURIDAD Para garantizar el máximo rendimiento de este producto, lea cuidadosamente este manual.  Lea estas instrucciones  Guarde estas instrucciones  Respete todas las adv...

[Page 15] TV One C2-6204

C2-6204 SERIES OPERATION MANUAL 10 en su cable o adaptador con la toma de corriente donde vaya a instalar la unidad. Si no ha recibido la clavija correcta, NO intente modificarla. Póngase inmediatamente en contacto con su distribuidor o con TV One...

[Page 16] TV One C2-6204

C2-6204 SERIES OPERATION MANUAL 11 2 BELANGRIJKE VEILIGHEIDSINSTRUCTIE Om dit product optimaal te kunnen gebruiken, dient u deze handleiding aandacht te lezen.  Lees deze instructies  Bewaar deze instructies  Let op alle waarschuwingen  ...

[Page 17] TV One C2-6204

C2-6204 SERIES OPERATION MANUAL 12  Het type wisselspanningkabel of adapter dat met deze eenheid is geleverd, dient overeen te komen met wat in uw land wordt gebruikt. Vergelijk de stekker van de kabel of adapter met het stop...

[Page 18] TV One C2-6204

C2-6204 SERIES OPERATION MANUAL 13 2 VIKTIGA SÄKERHETSANVISNINGAR För att få ut det bästa av din produkt bör du läsa denna bruksanvisning noggrant.  Läs dessa anvisningar  Spara dessa anvisningar  Rätta dig efter alla varningar  F...

[Page 19] TV One C2-6204

C2-6204 SERIES OPERATION MANUAL 14 Om du inte fick rätt stickkontakt FÅR DU INTE försöka anpassa den. Kontakta i stället omedelbart butiken eller TV Ones närmaste försäljningsställe och be att få rätt stickkontakt. 2.1 Intellektuell egen...

[Page 20] TV One C2-6204

C2-6204 SERIES OPERATION MANUAL 15 2 VIKTIGE SIKKERHETSANVISNINGER For at du skal få mest mulig ut av dette produktet, ber vi deg lese denne håndboken nøye.  Les disse anvisningene.  Ta vare på disse anvisningene.  Vær oppmerksom på a...

[Page 21] TV One C2-6204

C2-6204 SERIES OPERATION MANUAL 16 Hvis du har fått feil støpsel, må du IKKE forsøke å modifisere det. I stedet må du straks kontakte forhandleren eller nærmeste salgskontor for TV One og be om riktig type støpsel. 2.1 Opphavsrett Noen av I...

[Page 22] TV One C2-6204

C2-6204 SERIES OPERATION MANUAL 17 2 TÄRKEITÄ TURVALLISUUSOHJEITA Lue tämä opaskirja huolellisesti, jotta saat parhaan hyödyn tästä tuotteesta.  Lue nämä ohjeet  Säilytä nämä ohjeet  Ota kaikki varoitukset huomioon  Noudata...

[Page 23] TV One C2-6204

C2-6204 SERIES OPERATION MANUAL 18 Jos laitteen pistoke on väärä, ÄLÄ yritä muunnella sitä. Ota heti yhteys jälleenmyyjään tai lähimpään TV One -myyntikonttoriin ja pyydä oikeaa pistoketta. 2.1 Immateriaaliomaisuus Jotkut tässä tuo...

[Page 24] TV One C2-6204

C2-6204 SERIES OPERATION MANUAL 19 3 CAPABILITY, DEVICE FEATURES AND PRODUCT FEATURES 3.1 Device Capabilities The C2-6204 uses four proprietary CORIO ® 2 scaling engines to perform its functions, offering a powerful toolset for any application req...

[Page 25] TV One C2-6204

C2-6204 SERIES OPERATION MANUAL 20 processing hardware – the CORIO ® 2 scaling engine. See http://www.tvone.com/support for more detail. ...

[Page 26] TV One C2-6204

C2-6204 SERIES OPERATION MANUAL 21 4 PRODUCT IMAGES Your product should look like the unit below. ...

[Page 27] TV One C2-6204

C2-6204 SERIES OPERATION MANUAL 22 5 UNPACKING AND INSTALLATION 5.1 Shipping Carton Your unit will arrive double boxed for maximum protection during shipping. You are encouraged to retain both boxes and all packing material so the unit can be retur...

[Page 28] TV One C2-6204

C2-6204 SERIES OPERATION MANUAL 23 6 FRONT PANEL CONTROLS The range of buttons on the front of the unit provides the user with quick access for selecting a variety of inputs and features. The cross-hair (up/down/left/right) buttons on the front pane...

[Page 29] TV One C2-6204

C2-6204 SERIES OPERATION MANUAL 24 6.2 Menu navigation buttons The LCD is controlled from the front panel by using these buttons. These functions let the user navigate through the menu structure or change a parameter, and are detailed in a later s...

[Page 30] TV One C2-6204

C2-6204 SERIES OPERATION MANUAL 25 All stored settings except resolutions are lost when the unit is reset. A Firmware update is the only way to perform a complete factory reset (including resolution data). 6.4.4 Forcing output to specific resolutio...

[Page 31] TV One C2-6204

C2-6204 SERIES OPERATION MANUAL 26 7 VIDEO INPUTS AND OUTPUTS 7.1 C2-6204 This unit has 4x SDI inputs, 1x DVI-I background input, 1x DVI-I output and 1x SDI output. 7.2 Computer & Video inputs Signal DVI-I input Analog RGBHV  RGsB (sync on gr...

[Page 32] TV One C2-6204

C2-6204 SERIES OPERATION MANUAL 27 7.4 Computer & Video outputs The output resolution from your unit is set in the ‘Adjust outputs’ menu using the ‘Output res.’ menu item. The signal format is also selectable in that menu, with the fol...

[Page 33] TV One C2-6204

C2-6204 SERIES OPERATION MANUAL 28 7.6 Block diagram / product architecture This unit has 4 scaling engines and 4 keyers whose outputs are mixed together (with an optional background / cascade input) to form a single image, as in the block diagram ...

[Page 34] TV One C2-6204

C2-6204 SERIES OPERATION MANUAL 29 8 MENU LAYOUT AND SETTINGS ADJUSTMENT From here on, we’ll be looking at the menu structure and, more importantly, the individual menu items that allow you to take advantage of the power of the unit. You’ll be...

[Page 35] TV One C2-6204

C2-6204 SERIES OPERATION MANUAL 30 Menus are arranged so that a particular general function has a menu name on the top line and beneath that either a sub-menu or one or more related individual settings are displayed. In some cases the functionality...

[Page 36] TV One C2-6204

C2-6204 SERIES OPERATION MANUAL 31 Note that the ‘Advanced menus’ menu item must be ‘On’ to activate certain menu items. 8.2 Items Associated with the Adjust outputs group This menu group allows adjustments to be made that specifically affec...

[Page 37] TV One C2-6204

C2-6204 SERIES OPERATION MANUAL 32 one resolution to another while avoiding any potential frame-rate conversion artifacts. 'H/V shift' can be used to align the output to the input more accurately, but this may cause instability until the ...

[Page 38] TV One C2-6204

C2-6204 SERIES OPERATION MANUAL 33 Status message Description Effect No display There is no display attached (HOTPLUG is low). Nothing will be output on the DVI connector. Unavailable The device attached is not capable of supporting HDCP. As the D...

[Page 39] TV One C2-6204

C2-6204 SERIES OPERATION MANUAL 34 source’s input – hence it should be turned Off it the CV/YC outputs are going to be used. This menu item is only available when the Output resolution is set to PAL or NTSC. With this you can change the output ...

[Page 40] TV One C2-6204

C2-6204 SERIES OPERATION MANUAL 35 This menu item only appears on units with multiple windows or PIPs. It is used to select which one you want to modify. Alternatively, use one of the dedicated buttons on the front panel to choose the window to a...

[Page 41] TV One C2-6204

C2-6204 SERIES OPERATION MANUAL 36 By adjusting the H/V values, you can crop out the black areas to correct the size on the final output screen. Note that it does not change the shape or aspect ratio of the image – but just removes the parts of ...

[Page 42] TV One C2-6204

C2-6204 SERIES OPERATION MANUAL 37 This is a feature only present in advanced units only. It greatly improves the method of frame-rate conversion, by allowing the unit to merge frames together during the process. When ‘Off’, the unit will use ...

[Page 43] TV One C2-6204

C2-6204 SERIES OPERATION MANUAL 38 Certain units can display audio bar measurements and this menu item displays how many stereo-bars are shown. A maximum of 4 stereo bars (8 bars in total, with left- right pairs next to each other) can be shown. A...

[Page 44] TV One C2-6204

C2-6204 SERIES OPERATION MANUAL 39 Simple Advanced Pixel Zoom level % [100] Zoom H/V [100]100 1.333:1 In [ 0],0 640,480 H/V zoom pan% [50] 50 H/V zoom pan% [50] 50 Out [ 0],0 640,480 H/V crop % [ 0] 0 H/V crop % [ 0] 0 Shrink level % [50] ...

[Page 45] TV One C2-6204

C2-6204 SERIES OPERATION MANUAL 40 placed in the output video signal – in other words the ‘In’ and ‘Out’ positions and sizes. The diagram below should help to clarify the function of these values: In the example above, ‘In’ has been se...

[Page 46] TV One C2-6204

C2-6204 SERIES OPERATION MANUAL 41 Normally, your foreground is the input (window) source and your background is the lock source. This then allows you to superimpose any graphics or video input on top of the lock source by keying out a certain col...

[Page 47] TV One C2-6204

C2-6204 SERIES OPERATION MANUAL 42 Setting it to Off will cause the colour range that’s defined to be removed - remove the desired colors. Setting it to On will cause the colour range that’s defined to be kept - key out all other colors. The de...

[Page 48] TV One C2-6204

C2-6204 SERIES OPERATION MANUAL 43 This parameter controls how visible the border is to the viewer. A setting of 0 renders the border invisible (transparent) whereas a setting of 100 makes the Logo fully visible. (In-between settings can give the B...

[Page 49] TV One C2-6204

C2-6204 SERIES OPERATION MANUAL 44 This menu item controls where the source label will appear within the window that uses this source. H position options: Off, Left, Center, Right V position options: Off, Top, Middle, Bottom When either of the opt...

[Page 50] TV One C2-6204

C2-6204 SERIES OPERATION MANUAL 45 This menu item allows the font, H-Size and V-Size of the characters to be altered. If you make the font size too big, it may become corrupted or disappear. 8.7 Items Associated with the Adjust sources group The �...

[Page 51] TV One C2-6204

C2-6204 SERIES OPERATION MANUAL 46 Setting Result Fill (default) The source is stretched to fill the output. Aspect The source’s aspect ratio is maintained on the output. H-fit The source is stretched to fill the horizontal dimension of the output...

[Page 52] TV One C2-6204

C2-6204 SERIES OPERATION MANUAL 47 In most situations, the Audio input values would be different for each video source – so that when the first video source is selected, so is the first audio source (this is called ‘audio follow video’). The ...

[Page 53] TV One C2-6204

C2-6204 SERIES OPERATION MANUAL 48 Mode Function Normal/weave The two interlaced fields are simply combined/weaved together. This will often show artifacts on moving images, but can be used when the input is known to be still. Auto Automatically sel...

[Page 54] TV One C2-6204

C2-6204 SERIES OPERATION MANUAL 49 Status message Description Effect Inactive HDCP is not active at the DVI connector. HDCP-encrypted material cannot be received by the unit. Active HDCP is active at the DVI connector. HDCP-encrypted material ca...

[Page 55] TV One C2-6204

C2-6204 SERIES OPERATION MANUAL 50 It should also be noted that some graphic cards will require your PC to be re-booted before they see that a change has occurred. If your unit allows ‘HDMI’ to be selected, this can also enable certain audio fea...

[Page 56] TV One C2-6204

C2-6204 SERIES OPERATION MANUAL 51 pixel phase adjustment allows you to change the position (from 0 to 31) where the pixels are sampled, relative to the horizontal sync signal. To make this adjustment, select an RGB source and then provide an image ...

[Page 57] TV One C2-6204

C2-6204 SERIES OPERATION MANUAL 52 Saturation is the amount of color present in the image. Hue is the color “tint” parameter and the adjustment range is +90 degrees through to -90 degrees with 0 being the default. Within limits, you can enhance...

[Page 58] TV One C2-6204

C2-6204 SERIES OPERATION MANUAL 53 This first adjustment controls the type of transition desired: ‘Cut’, ‘Fade’, ‘Wipe’ or ‘Push’. If you select ‘Cut’ or ‘Fade’, the only remaining menu items will be ‘Switching Fade Time�...

[Page 59] TV One C2-6204

C2-6204 SERIES OPERATION MANUAL 54 Tally / GPIO connections are connected via a D25 socket: 13 12 11 10 9 8 7 6 5 4 3 2 1 5v TX+ RX+ GND TI8 TI7 TI6 TI5 TI4 TI3 TI2 TI1 GND TX- RX- GND TO8 TO7 TO6 TO5 TO4 TO3 TO2 TO1 GND 25 24 23 22 21 20 19 18 17 16...

[Page 60] TV One C2-6204

C2-6204 SERIES OPERATION MANUAL 55 In Normal mode, the borders are set as follows: Tally input pin pulled low Activation result on a 4-window system TI1 Window A has a red border TI2 Window A has a green border TI3 Window B has a red border TI4 Windo...

[Page 61] TV One C2-6204

C2-6204 SERIES OPERATION MANUAL 56 In most networks, all computers and other electronic equipment will have a dedicated connection to a network hub or switch, with each item having its own ‘IP address’ (Internet Protocol address). This is the ...

[Page 62] TV One C2-6204

C2-6204 SERIES OPERATION MANUAL 57 Enter 4 numbers one by one to form the IP address you wish to assign to the unit. The IP address is a series of four numbers between 0 and 255. Anything above 255 is not a valid number in an IP address range. The ...

[Page 63] TV One C2-6204

C2-6204 SERIES OPERATION MANUAL 58 DO NOT ADJUST THESE ITEMS UNLESS YOU’RE CERTAIN YOU KNOW WHAT YOU’RE DOING! THE ONLY METHOD TO UNDO CERTAIN CHANGES IS TO UPDATE THE FIRMWARE. TRY USING THE AUTOSET, SHRINK, SHRINK POS, TL & BR ADJUSTMENT...

[Page 64] TV One C2-6204

C2-6204 SERIES OPERATION MANUAL 59 The H.freq.fine (Horizontal Sync Frequency) adjustment provides the option for changing the Horizontal Sync timing Frequency in 1 Hz steps. Use this option to fine tune after using the course adjust. Please note t...

[Page 65] TV One C2-6204

C2-6204 SERIES OPERATION MANUAL 60 Porch have a direct bearing on where the active (visible) portion of the image begins. Do not attempt this adjustment without monitoring the results with an oscilloscope. There are standards for all current comput...

[Page 66] TV One C2-6204

C2-6204 SERIES OPERATION MANUAL 61 designators and cannot be changed by the user however both designators are important to support personnel. This is an information page showing when the currently installed software was released. The information is...

[Page 67] TV One C2-6204

C2-6204 SERIES OPERATION MANUAL 62 This parameter controls whether the ‘welcome’ screen is displayed or not on power up for units with an on-screen display – it can be disabled as required. This is useful when a unit is installed as part of a...

[Page 68] TV One C2-6204

C2-6204 SERIES OPERATION MANUAL 63 The screen labeled ‘Buzzer’ is actually the control for turning the “Beep” “On” or “Off”. Normally this is left in the “On” position to provide positive feedback that your data entries and par...

[Page 69] TV One C2-6204

C2-6204 SERIES OPERATION MANUAL 64 This is another informational display for usage audit purposes. Certain units have built-in temperature sensors, and if yours has such a feature then the above menu item will appear. If the ambient temperature of t...

[Page 70] TV One C2-6204

C2-6204 SERIES OPERATION MANUAL 65 9 SERIAL PORT 9.1 Connection Your unit is fitted with a standard ‘D9’ plug or socket allowing it to be controlled from a computer or other type of terminal or console with a similar interface. Most computers ...

[Page 71] TV One C2-6204

C2-6204 SERIES OPERATION MANUAL 66 Note: Any command you send to the unit will be replied to either with an error code or with the actual changed value. This may be different to the one you sent; for example, if trying to set a value too high or to...

[Page 72] TV One C2-6204

C2-6204 SERIES OPERATION MANUAL 67 10 SERIAL / IP CONTROL SPECIFICATION PLEASE NOTE: Not all units support Serial and/or IP (Ethernet) communications – check to see if this feature is present on your unit. This section outlines how to control a uni...

[Page 73] TV One C2-6204

C2-6204 SERIES OPERATION MANUAL 68 The ACK flag will be returned as 0 if the command is invalid for some reason – for example a bad FUNCTION, WINDOW, OUTPUT or PAYLOAD value. An ACK=0 message will be otherwise identical to the one you sent, so y...

[Page 74] TV One C2-6204

C2-6204 SERIES OPERATION MANUAL 69 returned means message was okay. ACK=0 returned means an error was present in the message. Bit 5 = 0 Reserved for future use. Bit 4 = 0 Reserved for future use. Bit 3 = 0 Reserved for future use. Bit 2 = 1 This bi...

[Page 75] TV One C2-6204

C2-6204 SERIES OPERATION MANUAL 70 CS ASCII-hex byte that is the (check) sum of all previous bytes (excluding the SOP 'F' character). E.g. The command F0400410082000001C8 has the checksum of 04+00+41+00+82+00+00+01=C8, so the complete com...

[Page 76] TV One C2-6204

C2-6204 SERIES OPERATION MANUAL 71 Adjust outputs Output enable 170 0=Blanked, 1=Active Lock source (connector) 149 0x10 to 0x1F = RGB1 to RGB16 0x30 to 0x3F = CV1 to CV16 0x40 to 0x4F = YC1 to YC16 0x50 to 0x5F = SDI1 to SDI16 0xD0 = OUT1, 0xD1 = OU...

[Page 77] TV One C2-6204

C2-6204 SERIES OPERATION MANUAL 72 4 = 16:9 Letterbox centre 5 = 16:9 Letterbox top 6 = >16:9 Letterbox centre 7 = 14:9 Full format 8 = 16:9 Full format Take 11E 0->1 = Perform a Preview -> Program transition Audio amp. Volume 201 -16 to 15...

[Page 78] TV One C2-6204

C2-6204 SERIES OPERATION MANUAL 73 In (top-left H) 21B In (top-left V) 21D In (H size) 21C In (V size) 21E Out (top-left H) 21F Out (top-left V) 221 Out (H size) 220 Out (V size) 222 Aspect change 190 0..2 = Normal, Letterbox, Pillarbox Aspect adjust...

[Page 79] TV One C2-6204

C2-6204 SERIES OPERATION MANUAL 74 E.blnd size H 18B 0.. limited by H width E.blnd size V 18C 0.. limited by V height E.blnd gamma H 188 1..150 1=0.01, 150=1.50 E.blnd gamma V 18D 1..150 1=0.01, 150=1.50 E.blnd comp cent 198 0..99 E.blnd comp side ...

[Page 80] TV One C2-6204

C2-6204 SERIES OPERATION MANUAL 75 Label H. Size 10..5F 249 0..8 Label V. Size 10..5F 24A 0..8 Label H. Position 10..5F 24D 0..3 (Off / Left / Center / Right) Label V. Position 10..5F 24E 0..3 (Off / Top / Middle / Bottom) Label char. to adj. 10..5F ...

[Page 81] TV One C2-6204

C2-6204 SERIES OPERATION MANUAL 76 M.comp.med., M.comp.high, Frame/bob (Film mode detected) 10..FF 0E3 0..1 = Not detected, Detected Diagonal interpolation 10..FF 22B 0..1 = Off, On Noise reduction 10..5F 23F 0..1 = Off, On Bright 30..5F 0BB 0..180 C...

[Page 82] TV One C2-6204

C2-6204 SERIES OPERATION MANUAL 77 1 = Normal 2 = Presets Tally input number 261 1 to 8 Tally preset to load 262 1 to 50 Adjust resolutions Note: You MUST set the 'Image to adjust' value to the correct value first, and only then change th...

[Page 83] TV One C2-6204

C2-6204 SERIES OPERATION MANUAL 78 Number of logos 14F Read only Board temp. (deg.C) 0CD Read only Air temp. (deg.C) 148 Read only Regulators temp.(deg.C) 147 Read only PLD temp. (deg.C) 111 Read only Fan speed (rpm) 0CE Read only Led brightness 12C ...

[Page 84] TV One C2-6204

C2-6204 SERIES OPERATION MANUAL 79 SOP CMD CHA WIN OUT FUN PAY CS EOP SOP CMD CHA WIN OUT FUN PAY CS EOP Set output 1 window B Source to RGB2 F 04 00 42 00 82 000011 D9 CR F 44 00 42 00 82 000011 19 CR Set output 1 window A to Enable advanced aspect ...

[Page 85] TV One C2-6204

C2-6204 SERIES OPERATION MANUAL 80 10.5.1 Reading a previously stored Macro In order to read a macro the following commands must be sent in this specific order – no other commands should be sent between these messages. The CHA in these cases re...

[Page 86] TV One C2-6204

C2-6204 SERIES OPERATION MANUAL 81 F 04 02 42 00 F1 000001 3A CR F 44 02 42 00 F1 000001 7A CR Write the function for first item in macro 3 = Zoom F 04 02 42 00 F3 000086 C1 CR F 44 02 42 00 F3 000011 01 CR Write data for the first item = 100 F 04 02...

[Page 87] TV One C2-6204

C2-6204 SERIES OPERATION MANUAL 82 Set to 720p 59.94Hz output 0000EB Set to 720p 60Hz output 0000EC Cycle presets (demo mode) 0100EE Select DVI-I1 as source 000200 Select DVI-I2 as source 000201 Select DVI-I3 as source 000202 Select DVI-I4 as source ...

[Page 88] TV One C2-6204

C2-6204 SERIES OPERATION MANUAL 83 Run Macro 5 00021D Run Macro 6 000267 Run Macro 7 000268 Add to Macro 1 020119 Add to Macro 2 02011A Add to Macro 3 02011B Add to Macro 4 02011C Add to Macro 5 02011D Add to Macro 6 020167 Add to Macro 7 020168 Eras...

[Page 89] TV One C2-6204

C2-6204 SERIES OPERATION MANUAL 84 Select CV1 as source for window A 00023F Select CV2 as source for window A 000240 Select CV3 as source for window A 000241 Select YC1 as source for window A 000242 Select YC2 as source for window A 000243 Select YC3...

[Page 90] TV One C2-6204

C2-6204 SERIES OPERATION MANUAL 85 Select RGB2 as source 00027D Select YUV1 as source 000264 Logo 1A toggle on/off 000265 Logo 2B toggle on/off 000266 Window 1A toggle on/off 00026D Window 2B toggle on/off 00026E Go to Lock menu item 00027E Output 1 ...

[Page 91] TV One C2-6204

C2-6204 SERIES OPERATION MANUAL 86 Erase Preset 3 280193 Erase Preset 4 280194 Erase Preset 5 280195 Erase Preset 6 280196 Erase Preset 7 280197 Erase Preset 8 280198 Erase Preset 9 280199 Erase Preset 10 28019A Set output to BLACK 00029B Set output ...

[Page 92] TV One C2-6204

C2-6204 SERIES OPERATION MANUAL 87 COMMON OPERATIONS This section provides step by step instructions for some common operations. 10.6 Operation of the Keyer Some units come equipped with a very powerful Luminance and Chrominance Keyer. The Keyer can...

[Page 93] TV One C2-6204

C2-6204 SERIES OPERATION MANUAL 88 to decrease the ‘min’ values and increase the ‘max’ values to broaden the range of colors keyed out. At this point, only the key color should remain transparent. ...

[Page 94] TV One C2-6204

C2-6204 SERIES OPERATION MANUAL 89 11 TROUBLESHOOTING AND TECHNICAL SUPPORT If problems are experienced, please read through the symptom topics below in order to resolve the problem. After doing so, if you still need to, contact Technical Support a...

[Page 95] TV One C2-6204

C2-6204 SERIES OPERATION MANUAL 90 11.4 There is excessive flicker on the Output. Try using a different Flicker reduction mode. Turning the contrast down and the brightness up on the output device can have a large effect on flicker. Or try adjustin...

[Page 96] TV One C2-6204

C2-6204 SERIES OPERATION MANUAL 91 11.11 The RGB input is selected but the image is rolling or pink. Check the Adjust sources menu and confirm that the input type and sync method is set correctly. (Having YUV input selected, instead of RGBHV often c...

[Page 97] TV One C2-6204

C2-6204 SERIES OPERATION MANUAL 92 12 RETURN PROCEDURE Before returning your unit for repair, there are several checks you can make yourself to make sure the problem is actually caused by a failure. 12.1 Are you sure there's a fault? Many &apos...

[Page 98] TV One C2-6204

C2-6204 SERIES OPERATION MANUAL 93 Please clearly state the return number on the outside packaging and on any accompanying documentation. This will greatly speed up processing. IMPORTANT: DO NOT return a unit for warranty repair without first obtain...

[Page 99] TV One C2-6204

C2-6204 SERIES OPERATION MANUAL 94 13 WARRANTY POLICY LIMITED WARRANTY – With the exceptions noted in the next paragraph, TV One warrants the original purchaser that the equipment it manufactures or sells will be free from defects in materials an...

[Page 100] TV One C2-6204

C2-6204 SERIES OPERATION MANUAL 95 14 CONNECTOR PINOUTS 14.1 DVI-I connector PIN# SIGNAL PIN# SIGNAL 1 T.M.D.S DATA 2- 16 HOT PLUG DETECT 2 T.M.D.S DATA 2+ 17 T.M.D.S DATA 0- 3 T.M.D.S DATA 2/4 SHIELD 18 T.M.D.S DATA 0+ 4 Not used 19 T.M.D.S DATA 0/5...