Wittco 1826-7-DBL Operating & Maintenance Manual

[Page 1] Wittco 1826-7-DBL

OPERATIONS MAINTENANCE MANUAL FOOD HOLDING & TRANSPORT CABINETS WITTCO MODEL NUMBERS 1826-7-DBL 1826-7-DBL-IS ...

[Page 2] Wittco 1826-7-DBL

LIMITED WARRANTY Wittco warrants the Products that it manufactures to be free from defects in materials and workmanship, under normal use and service, for the periods indicated below from the date of purchase when installed and maintained in accord...

[Page 3] Wittco 1826-7-DBL

WITTCO TECHNICAL & PRODUCT SUPPORT TECHNICAL SUPPORT & SERVICE INQUIRES MAY BE DIRECTED TO WITTCO BY: 1. CALLING DIRECTLY TO: WITTCO FOODSERVICE EQUIPMENT TECHNICAL & SERVICE DEPARTMENT - (800) 367-8413 8:00 AM - 4:30 PM (CENTRAL ...

[Page 4] Wittco 1826-7-DBL

INTRODUCTION The 1826 DBL and 1826 DBL IS series of commercial and institutional cabinets from Wittco Foodservice Equipment provide an efficient and sanitary method of holding and transporting prepared food products. Because these cabinets provi...

[Page 5] Wittco 1826-7-DBL

Each Wittco Foodservice Equipment cabinet is packed in a cardboard carton which, in turn, is banded to a wooden pallet. When the cabinet is received by the operator, the carton should immediately be inspected for any sign of visible exterior damage...

[Page 6] Wittco 1826-7-DBL

As the elements are heating, the thermometers will begin to move and indicate the interior temperature of the compartments. At the number 5 setting the thermometer should indicate an average temperature of approximately 150 degrees 0 F. NOTE: The...

[Page 7] Wittco 1826-7-DBL

THERMOSTAT REPLACEMENT (CON'T) 5. Disconnect the wire leads connected to the thermostat. 6. Loosen the screws holding the temperature sensing bulb and remove it from the interior of the cabinet. The temperature sensing bulb must be re...

[Page 8] Wittco 1826-7-DBL

HEATING ELEMENT REPLACEMENT 1. DISCONNECT THE CABINET FROM ITS POWER SOURCE. 2. Open the door to the cabinet. 3. Remove the bottom mounted element cover. 4 Remove the retaining screws securing the element to the interior rear of the...

[Page 9] Wittco 1826-7-DBL

DRAWING TITLE 1826-7-DBL WIRING DIAGRAM 120V. 1PH. 60 HZ ...

[Page 10] Wittco 1826-7-DBL

WITTCO FOODSERVICE EQUIPMENT INC. REPLACEMENT PARTS LIST WTTTCO SERIES - HOLDING/TRANSPORT CABINETS 6/18/98 MODEL NUMBER AND QUANTITY REQUIRED WITTCO PART NO. PART DESCRIPTION 1826-7-DBL WP-113-E BUMPER, ALUMINUM EXTRUSION ONLY (NO VINYL)...

[Page 11] Wittco 1826-7-DBL

MODEL NUMBER AND QUANTITY REQUIRED WITTCO PART NO. PART DESCRIPTION 1826-7-DBL WP-174 INSPECTION CAP, CHROME 2 WP-106-1 LIGHT, INDICATOR DUAL 125 VOLT (AMBER/RED) 2 WP-106-2 LIGHT, INDICATOR DUAL 250 VOLT (AMBER/RED) 2 WP-302-7L RACKS...

[Page 12] Wittco 1826-7-DBL

MODEL NUMBER AND QUANTITY REQUIRED WITTCO PART NO. PART DESCRIPTION 1826-7-DBL-IS WP-113-EI BUMPER, ALUMINUM EXTRUSION ONLY (NO VINYL) 1 WP-113-VI BUMPER, BLACK VINYL ONLY (NO EXTRUSION) 1 WP-079 CARD HOLDER 3" x 5" 1 WP-114...

[Page 13] Wittco 1826-7-DBL

MODEL NUMBER AND QUANTITY REQUIRED WITTCO PART NO. PART DESCRIPTION 1826-7-DBL-IS WP-174 INSPECTION CAP, CHROME 2 WP-106-1 LIGHT, INDICATOR DUAL 125 VOLT (AMBER/RED) 2 WP-106-2 LIGHT, INDICATOR DUAL 250 VOLT (AMBER/RED) 2 WP-316-L RAC...