Download or browse on-line these Installation Manual for Wirepath Surveillance WPS-750-DOM-IPH Security Camera.
This manual for Wirepath Surveillance WPS-750-DOM-IPH, given in the PDF format, is available for free online viewing and download without logging on. The guide contains 70 pages, and the size of the file at download is . The document type is Installation Manual.
[Page 1] Wirepath Surveillance WPS-750-DOM-IPH
CAMERA IP DOME INSTALLATION MANUAL Review manual thoroughly before installation. Retain for future reference. WPS-750-DOM-IPH ...
[Page 2] Wirepath Surveillance WPS-750-DOM-IPH
2 WPS-750-DOM-IPH Installation Manual 1. Safety Instructions 1. Read and follow all instructions and warnings in this manual. Keep for future reference. 2. Install according to manufacturer’s instructions. 3. Do not install near any heat source...
[Page 3] Wirepath Surveillance WPS-750-DOM-IPH
3 © 2014 Wirepath Surveillance WPS-750-DOM-IPH Installation Manual Table of Contents 1. Safety Instructions 2 2. Introduction 7 2.1. Features 7 3. Package Contents 8 4. Required Items for Installation 8 5. How It Works 9 6. Camera Connec...
[Page 4] Wirepath Surveillance WPS-750-DOM-IPH
4 WPS-750-DOM-IPH Installation Manual 10.2.1. System Information Menu Settings 20 10.2.1.1. Server Information 20 10.2.1.2. OSD Setting 20 10.2.1.3. Time Setting 21 10.2.1.4. Network LED 21 10.2.2. Camera Time Setup 22 10.2.2.1. NTP Time ...
[Page 5] Wirepath Surveillance WPS-750-DOM-IPH
5 © 2014 Wirepath Surveillance WPS-750-DOM-IPH Installation Manual 10.3.6. PPPoE Setup 38 10.3.6.1. PPPoE Overview 38 10.3.6.2. PPPoE Settings 38 10.3.6.3. Send Mail after PPoE Dialed 38 10.3.7. DDNS Setup 39 10.3.7.1. DDNS Overview 39 10...
[Page 6] Wirepath Surveillance WPS-750-DOM-IPH
6 WPS-750-DOM-IPH Installation Manual 10.5.3.1. Snapshot Menu 59 10.5.3.2. How to Set Up Scheduling for Events 60 10.5.3.3. Set up Snapshot 60 10.5.4. I/O Settings 61 10.5.4.1. Input Settings 61 10.5.4.2. Output Settings 61 10.6. Log List ...
[Page 7] Wirepath Surveillance WPS-750-DOM-IPH
7 © 2014 Wirepath Surveillance WPS-750-DOM-IPH Installation Manual 2. Introduction Thank you for purchasing a Wirepath™ IP Surveillance camera. The WPS-750-DOM-IPH is an indoor/outdoor camera designed for mounting to any wall, ceiling or surfac...
[Page 8] Wirepath Surveillance WPS-750-DOM-IPH
8 WPS-750-DOM-IPH Installation Manual 3. Package Contents NOTE: A POWER SUPPLY IS NOT INCLUDED WITH THIS CAMERA. The PS-12DC-1A, WPS-PS multiple output power supply or a Power over Ethernet (PoE) switch is recommended. 4. Required Items for Instal...
[Page 9] Wirepath Surveillance WPS-750-DOM-IPH
9 © 2014 Wirepath Surveillance WPS-750-DOM-IPH Installation Manual How Does IP Video Surveillance Work? Wirepath™ IP cameras use a digital image processor to capture video in a stream of packets that are broadcast using a standard Ethernet netwo...
[Page 10] Wirepath Surveillance WPS-750-DOM-IPH
10 WPS-750-DOM-IPH Installation Manual 6. Camera Connections Wirepath™ Surveillance IP Cameras can be powered by Power over Ethernet (PoE) through the Cat5e/Cat6 Ethernet connection. This method is recommended because it limits the amount of wiri...
[Page 11] Wirepath Surveillance WPS-750-DOM-IPH
11 © 2014 Wirepath Surveillance WPS-750-DOM-IPH Installation Manual 6.1. Network Cable Recommendation (PoE and non-PoE) • Cable Type: Cat5e/6 • Max Length: 100 meters (328 feet) • Termination: 568B recommended 6.2. Choosing the Right Net...
[Page 12] Wirepath Surveillance WPS-750-DOM-IPH
12 WPS-750-DOM-IPH Installation Manual 7. Camera Installation Instructions 7.1. Wiring Installation A. Run a Cat5e/6 cable from the network port to the camera location and terminate both ends to 568B. B. (Non-PoE applications only) Run wiring to ...
[Page 13] Wirepath Surveillance WPS-750-DOM-IPH
13 © 2014 Wirepath Surveillance WPS-750-DOM-IPH Installation Manual 7.3. Aiming the Camera A. Connect the BNC Test Adapter to a monitor or WPS-CCTV-TESTER video in. B. Connect a power supply to the secondary power connection on the camera (if ma...
[Page 14] Wirepath Surveillance WPS-750-DOM-IPH
14 WPS-750-DOM-IPH Installation Manual 8.1. Network Software Setup - IP Installer The IP Installer software included with the camera provides a quick view of Wirepath™ IP Surveillance devices connected to the local network. Use the Installer to s...
[Page 15] Wirepath Surveillance WPS-750-DOM-IPH
15 © 2014 Wirepath Surveillance WPS-750-DOM-IPH Installation Manual 8.2. IP Installer-Conguring Camera IP Settings By default, the camera will receive a DHCP IP address. This should be changed to a reserved or static IP address so that the cam...
[Page 16] Wirepath Surveillance WPS-750-DOM-IPH
16 WPS-750-DOM-IPH Installation Manual 9. IP Camera Web Interface - Setup and Use 9.1. First Time Access Instructions A. Connect the PC to the same local network (LAN) the camera is connected to. B. Open the web browser and enter the IP address t...
[Page 17] Wirepath Surveillance WPS-750-DOM-IPH
17 © 2014 Wirepath Surveillance WPS-750-DOM-IPH Installation Manual 9.2. Camera Web Browser Interface The web browser Home screen displays video and current information from the camera feed. The camera name, time signature, video frame size and f...
[Page 18] Wirepath Surveillance WPS-750-DOM-IPH
18 WPS-750-DOM-IPH Installation Manual 9.2.2. Web Interface Layout - Bottom Bar 1. Information Bar Displays basic information about the camera feed. 2. Video Size Adjusts the size of the Live View area within the browser window. 3. Video Source (I...
[Page 19] Wirepath Surveillance WPS-750-DOM-IPH
19 © 2014 Wirepath Surveillance WPS-750-DOM-IPH Installation Manual 10. Camera Conguration Menu Setup After browser access to the camera has been established, the remaining steps for setup may be completed so that cameras are remotely viewable...
[Page 20] Wirepath Surveillance WPS-750-DOM-IPH
20 WPS-750-DOM-IPH Installation Manual 10.2. System Information and Settings 10.2.1. System Information Menu Settings • Navigation: Log in as an administrator. From Home Screen, click “Cong” button in top right corner. 10.2.1.1. Server In...
[Page 21] Wirepath Surveillance WPS-750-DOM-IPH
21 © 2014 Wirepath Surveillance WPS-750-DOM-IPH Installation Manual 10.2.1.3. Time Setting 3 Server Time Current time based on the settings saved in the camera. Date Format Select the order in which days (d), months (m), and years (y) are displaye...
[Page 22] Wirepath Surveillance WPS-750-DOM-IPH
22 WPS-750-DOM-IPH Installation Manual 10.2.2. Camera Time Setup Important! Wirepath™ Surveillance strongly recommends using the “NTP” time setting option unless Internet access is not available from the camera network. Other settings may not ...
[Page 23] Wirepath Surveillance WPS-750-DOM-IPH
23 © 2014 Wirepath Surveillance WPS-750-DOM-IPH Installation Manual 10.2.2.5. NTP Setup Instructions (For Cameras with Internet Access) A. Set the Time Setting option to “NTP”. B. Set the desired Date Format and Time Zone. C. If applicable ...
[Page 24] Wirepath Surveillance WPS-750-DOM-IPH
24 WPS-750-DOM-IPH Installation Manual 10.2.3. User Management • Navigation: Log in as an administrator. From Home Screen, click “Cong” button in top right corner, then click “User Management” in left column “System” sub-menu. 10.2...
[Page 25] Wirepath Surveillance WPS-750-DOM-IPH
25 © 2014 Wirepath Surveillance WPS-750-DOM-IPH Installation Manual 10.2.3.5. Administrator Account Setup Once the camera is accessible on the network, the administrator password should be changed to prevent unwanted access. Select a new password...
[Page 26] Wirepath Surveillance WPS-750-DOM-IPH
26 WPS-750-DOM-IPH Installation Manual 10.2.4. System Update • Navigation: Log in as an administrator. From Home Screen, click “Cong” button in top right corner, then click “User Management” in left column “System” sub-menu. Import...
[Page 27] Wirepath Surveillance WPS-750-DOM-IPH
27 © 2014 Wirepath Surveillance WPS-750-DOM-IPH Installation Manual 10.2.4.4. How to Back up Camera Settings Once the settings for a camera have been set up, they can be downloaded to a conguration backup le in case the camera is reset or m...
[Page 28] Wirepath Surveillance WPS-750-DOM-IPH
28 WPS-750-DOM-IPH Installation Manual 10.2.4.6. Upgrade the Firmware Important! Updating Firmware MUST be performed over a wired IP connection to the device to ensure that a connection is sustained throughout the process. If connection is lost dur...
[Page 29] Wirepath Surveillance WPS-750-DOM-IPH
29 © 2014 Wirepath Surveillance WPS-750-DOM-IPH Installation Manual 10.3. Network IP Settings • Navigation: Log in as an administrator. From Home Screen, click “Cong” button in top right corner, then click “IP Settings” in left colu...
[Page 30] Wirepath Surveillance WPS-750-DOM-IPH
30 WPS-750-DOM-IPH Installation Manual Basic IP Settings, Continued 10.3.1.2. Port Assignment 2 Web Page Port Port for accessing the camera web interface. Set to 80 by default. Each Camera must have a unique port number in order to access from out...
[Page 31] Wirepath Surveillance WPS-750-DOM-IPH
31 © 2014 Wirepath Surveillance WPS-750-DOM-IPH Installation Manual Basic IP Settings, Continued 10.3.1.4. RTSP Setting The camera supports Real Time Streaming Protocol (RTSP). RTSP is a network protocol designed to allow media devices to stream ...
[Page 32] Wirepath Surveillance WPS-750-DOM-IPH
32 WPS-750-DOM-IPH Installation Manual Basic IP Settings, Continued 10.3.1.6. ONVIF The ONVIF (Open Network Video Interface Forum) standard is used by IP surveillance for communication across devices from various manufacturers. This setting does no...
[Page 33] Wirepath Surveillance WPS-750-DOM-IPH
33 © 2014 Wirepath Surveillance WPS-750-DOM-IPH Installation Manual 10.3.2. Advanced IP Settings - HTTPS Access Setup Accessing the Camera through HTTPS provides an additional security level for the video stream by requiring certicate authentic...
[Page 34] Wirepath Surveillance WPS-750-DOM-IPH
34 WPS-750-DOM-IPH Installation Manual 10.3.3. Advanced IP Settings - SNMP SNMP (Simple Network Management Protocol) is used for network management of larger networks. It allows for monitoring network devices such as IP cameras via a management host...
[Page 35] Wirepath Surveillance WPS-750-DOM-IPH
35 © 2014 Wirepath Surveillance WPS-750-DOM-IPH Installation Manual 10.3.4. Advanced IP Settings - Access List (IP Filter) IP address ltering is used to allow or deny access to the camera from individual IP addresses or ranges of IP addresses. T...
[Page 36] Wirepath Surveillance WPS-750-DOM-IPH
36 WPS-750-DOM-IPH Installation Manual 10.3.4.2. Add or Remove IP Addresses or Ranges A. Enable IP Address Filtering to gain access to the settings: B. Enter an IP address or range of addresses into the eld and select whether to allow or deny a...
[Page 37] Wirepath Surveillance WPS-750-DOM-IPH
37 © 2014 Wirepath Surveillance WPS-750-DOM-IPH Installation Manual 10.3.5. Advanced IP Settings - QoS/DSCP Quality of Service (QoS) is used within a network to dene priority levels for selected trafc. This allows for a higher level of bandw...
[Page 38] Wirepath Surveillance WPS-750-DOM-IPH
38 WPS-750-DOM-IPH Installation Manual 10.3.6. PPPoE Setup 10.3.6.1. PPPoE Overview Point-to-Point Protocol Over Ethernet (PPPoE) is a network protocol primarily used with DSL (Digital Subscriber Line) providers and modems. This protocol requires a...
[Page 39] Wirepath Surveillance WPS-750-DOM-IPH
39 © 2014 Wirepath Surveillance WPS-750-DOM-IPH Installation Manual 10.3.7. DDNS Setup 10.3.7.1. DDNS Overview Dynamic Domain Name Servers (DDNS) map an alphanumeric Internet domain name to a network’s WAN IP address. When congured, DDNS ena...
[Page 40] Wirepath Surveillance WPS-750-DOM-IPH
40 WPS-750-DOM-IPH Installation Manual 10.3.7.4. Setting Up a DDNS Address – WirepathDNS A. To use Wirepath DDNS service, enable the DDNS feature by selecting the button. B. Enter a prex for the address in the host name eld as shown in the...
[Page 41] Wirepath Surveillance WPS-750-DOM-IPH
41 © 2014 Wirepath Surveillance WPS-750-DOM-IPH Installation Manual 10.3.8. Server Settings Server Settings menus allow conguration of the message and le transfer systems used by the camera to send emails, video les, or snapshots to: emai...
[Page 42] Wirepath Surveillance WPS-750-DOM-IPH
42 WPS-750-DOM-IPH Installation Manual 10.3.8.3. FTP Settings An FTP server is a remote computer server the camera connects to over the network or Internet. When an FTP server is congured, recorded video and snapshot les can be stored on the ...
[Page 43] Wirepath Surveillance WPS-750-DOM-IPH
43 © 2014 Wirepath Surveillance WPS-750-DOM-IPH Installation Manual 10.3.8.4. Network Share Settings • Navigation: Log in as an administrator. From Home Screen, click “Cong” button in top right corner, then click “Server Settings” i...
[Page 44] Wirepath Surveillance WPS-750-DOM-IPH
44 WPS-750-DOM-IPH Installation Manual 10.4. Camera A/V Settings 10.4.1. Image Settings Menu The image setting menu is used to set up the camera view for the best image possible. Brief descriptions of the menu are given below. Complete instructions...
[Page 45] Wirepath Surveillance WPS-750-DOM-IPH
45 © 2014 Wirepath Surveillance WPS-750-DOM-IPH Installation Manual 10.4.1.1. Tips for Getting the Best Camera Image • Too much brightness causes the image to fade. Too little brightness will cause dark colors to run together. • Too much con...
[Page 46] Wirepath Surveillance WPS-750-DOM-IPH
46 WPS-750-DOM-IPH Installation Manual 10.4.2. How to Congure Day & Night Settings (Color Modes) The camera can record an image in color or black-and-white mode. Color mode requires more light but provides the best image given ideal condition...
[Page 47] Wirepath Surveillance WPS-750-DOM-IPH
47 © 2014 Wirepath Surveillance WPS-750-DOM-IPH Installation Manual 10.4.2.2. Day & Night Modes Select the mode from the Day & Night drop-down menu. Light Sensor Mode (Default) Uses camera light sensor to switch between Color (Day) and ...
[Page 48] Wirepath Surveillance WPS-750-DOM-IPH
48 WPS-750-DOM-IPH Installation Manual 10.4.2.5. How to Congure Privacy Masks Privacy mask allows for areas of an image to be blocked out to avoid unwanted capturing of sensitive areas. Example: A camera used to monitor the front lawn of a house...
[Page 49] Wirepath Surveillance WPS-750-DOM-IPH
49 © 2014 Wirepath Surveillance WPS-750-DOM-IPH Installation Manual 10.4.3. Video Settings Menu Overview The Camera supports up to four streams that can be used for streaming to a mobile device, network recorder, control system GUI, or the browser...
[Page 50] Wirepath Surveillance WPS-750-DOM-IPH
50 WPS-750-DOM-IPH Installation Manual 10.4.4. Video Streaming 1 and 2 Setup Note: Streaming 1 and 2 settings are identical. Settings options have only been covered once. Basic/ Advanced Mode Set the streaming mode to “Advanced” to allow ne c...
[Page 51] Wirepath Surveillance WPS-750-DOM-IPH
51 © 2014 Wirepath Surveillance WPS-750-DOM-IPH Installation Manual Video Streaming 1 and 2 Setup, Continued GOP Size GOP (Group of Pictures) is used to generate the visible frames of a video stream. The GOP size setting determines the multiplier ...
[Page 52] Wirepath Surveillance WPS-750-DOM-IPH
52 WPS-750-DOM-IPH Installation Manual 10.4.5. Streaming 3 and 4 Setup 10.4.5.1. Streaming 3 1 Video Quality Changes the video bitrate based on a level from Low (slowest) to Best (fastest). Click “Apply” at the bottom right of the page to save m...
[Page 53] Wirepath Surveillance WPS-750-DOM-IPH
53 © 2014 Wirepath Surveillance WPS-750-DOM-IPH Installation Manual 10.4.6. Audio Settings The camera supports two-way audio recording and playback. Record audio at the camera location using an external microphone, and hear it on PC’s or smartp...
[Page 54] Wirepath Surveillance WPS-750-DOM-IPH
54 WPS-750-DOM-IPH Installation Manual 10.4.7. Camera Audio Technology Overview 10.4.7.1. How to Enable Audio Setup Enable these settings ONLY if the features are being used, and only AFTER installation and connection of cameras and audio equipment...
[Page 55] Wirepath Surveillance WPS-750-DOM-IPH
55 © 2014 Wirepath Surveillance WPS-750-DOM-IPH Installation Manual 10.5. Event Record Setup and Scheduling Cameras can be set up to record on a set schedule, or in response to contact closure, motion or tampering. Set up how and when events are ...
[Page 56] Wirepath Surveillance WPS-750-DOM-IPH
56 WPS-750-DOM-IPH Installation Manual 10.5.1.1. Record File 3 File Format Selects the le type to create when the event occurs: • AVI File – Creates a short .AVI format video le. • JPEG Files (Streaming 1 must be set MJPEG) – Creates...
[Page 57] Wirepath Surveillance WPS-750-DOM-IPH
57 © 2014 Wirepath Surveillance WPS-750-DOM-IPH Installation Manual 10.5.2. Conguring Motion Detection Areas Motion detection allows for specic areas of the image to be used for triggering the recording of video, an alarm, or sending a noti�...
[Page 58] Wirepath Surveillance WPS-750-DOM-IPH
58 WPS-750-DOM-IPH Installation Manual 10.5.2.2. Adding a New Motion Detection Area A. Select Event Setting under Event on the left side Menu. B. Select the Area for Motion Detection. C. Select Area 1 next to the blue box. D. Place the mouse at ...
[Page 59] Wirepath Surveillance WPS-750-DOM-IPH
59 © 2014 Wirepath Surveillance WPS-750-DOM-IPH Installation Manual 10.5.3. Schedule Menu Use this menu to congure a schedule for capturing images from the camera to be stored. 1 Enable Check box to Enable Scheduling feature. Schedule Grid with ...
[Page 60] Wirepath Surveillance WPS-750-DOM-IPH
60 WPS-750-DOM-IPH Installation Manual 10.5.3.2. How to Set Up Scheduling for Events A. Select Schedule under Event on the left side Menu. B. Select the Enabled check box. C. Click on the box(es) to enable one-hour blocks of time for the desired ...
[Page 61] Wirepath Surveillance WPS-750-DOM-IPH
61 © 2014 Wirepath Surveillance WPS-750-DOM-IPH Installation Manual 10.5.4. I/O Settings 10.5.4.1. Input Settings 1 DI Sensor State N.O Camera expects contact closure connected to the DI input to be normally Open. Event is triggered when the c...
[Page 62] Wirepath Surveillance WPS-750-DOM-IPH
62 WPS-750-DOM-IPH Installation Manual 10.6. Log List The camera software stores a log le for several parameters in the camera. Use the Log List menu to select a log to view. System Log 1 Displays System events such as logins and conguration ...
[Page 63] Wirepath Surveillance WPS-750-DOM-IPH
63 © 2014 Wirepath Surveillance WPS-750-DOM-IPH Installation Manual 10.7. SD Card Menu Use this menu to set up and access a microSD card. 10.7.1. Playback 1 This area will display “No SD Card” when no microSD card is installed. When a compatib...
[Page 64] Wirepath Surveillance WPS-750-DOM-IPH
64 WPS-750-DOM-IPH Installation Manual 11. Internal Heater Overview This IP camera is equipped with an internal heating element that is programmed to turn on as needed based on ambient temperature. If temperatures fall below 23°F for an extended ...
[Page 65] Wirepath Surveillance WPS-750-DOM-IPH
65 © 2014 Wirepath Surveillance WPS-750-DOM-IPH Installation Manual 12. Reset Procedure If the camera ever becomes unresponsive after an update, or Administrator access is lost, it may be necessary to manually reset the camera back to default con...
[Page 66] Wirepath Surveillance WPS-750-DOM-IPH
14. Specications Imaging Image Sensor 1/2.7” 2MP CMOS sensor Lens Type Varifocal 3~10.5mm Mega Pixel Lens F1.4 View Angle 103.73°(H) 54.43°(V) Video Resolution 1920x1080@30fps, 1280x720@30fps, 640x480@30fps, 320x240@30fps, 176x144@30fps Mini...
[Page 67] Wirepath Surveillance WPS-750-DOM-IPH
Security and QoS Password protection, IP address ltering, HTTPS encrypted data transmission, QoS/DSCP Simultaneous Connections / Users Up to 10 SD Card Management Yes Recording Triggers Motion Detection IP Ping failure Network disconnect Sched...
[Page 68] Wirepath Surveillance WPS-750-DOM-IPH
68 WPS-750-DOM-IPH Installation Manual 15. Dimensions Top View Side View 5.91" 4.04" 67.0° Maximum Camera Angle ...
[Page 69] Wirepath Surveillance WPS-750-DOM-IPH
16. Warranty 3-Year Limited Warranty This Camera has a 3-Year Limited Warranty. The warranty includes parts and labor repairs on all components found to be defective in material or workmanship under normal conditions of use. This warranty shall not...
[Page 70] Wirepath Surveillance WPS-750-DOM-IPH
140826-1430 © 2014 Wirepath™ Surveillance ...
Instruction manual (2 pages)
Owner's manual (12 pages)
Specifications (1 pages)
Operation & user’s manual (29 pages)
Operation & user’s manual (76 pages)
Installation manual (2 pages)