Nortel 1120E User Manual

[Page 1] Nortel 1120E

Expansion Module for IP Phone 1100 Series User Guide Title page ...

[Page 2] Nortel 1120E

...

[Page 3] Nortel 1120E

Revision history 3 Revision history May 2007 Standard 01.03. This document is up-issued to support Nortel Communication Server 1000 Release 5.0 software. December 2006 Standard 01.02. This document is up-issued to include updates based on feedback....

[Page 4] Nortel 1120E

Revision history 4 ...

[Page 5] Nortel 1120E

Contents 5 Contents About the Expansion Module for IP Phone 1100 Series . . . 7 Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

[Page 6] Nortel 1120E

Contents 6 ...

[Page 7] Nortel 1120E

About the Expansion Module for IP Phone 1100 Series 7 About the Expansion Module for IP Phone 1100 Series This document describes the Expansion Module for IP Phone 1100 Series (Expansion Module) and how to use it with the IP Phone. Description The ...

[Page 8] Nortel 1120E

About the Expansion Module for IP Phone 1100 Series 8 Figure 1: IP Phone 1140E with Expansion Module Features The Expansion Module has the following features: • 18 keys provide up to 36 additional self-labeled line/programmable feature keys when ...

[Page 9] Nortel 1120E

About the Expansion Module for IP Phone 1100 Series 9 Adjusting the display The Expansion Module is equipped with a graphical, pixel-based, grayscale LCD display area beside the 18 line/feature keys (see Figure 1 on page 8). Each of the 18 physical...

[Page 10] Nortel 1120E

Setup and assembly 10 Setup and assembly The Expansion Module mounts on the right side of the IP Phone. The Expansion Module snaps into the Accessory Expansion Module (AEM) on the back of the IP Phone using the desk-mount bracket and structural ba...

[Page 11] Nortel 1120E

Setup and assembly 11 Installing the Expansion Module Use the following instructions to install the Expansion Module. 1. Press the tilt lever to adjust the stand angle on the IP Phone. You can adjust the stand angle to maximum, instead of removing t...

[Page 12] Nortel 1120E

Setup and assembly 12 Figure 2: Adjusting the stand angle on the IP Phone 2. At the back of the IP Phone, remove the rubber plug from the AEM port. Place the connecting arm of the Expansion Module behind the IP Phone and align the Expansion Modul...

[Page 13] Nortel 1120E

Setup and assembly 13 Figure 3: Connecting the Expansion Module 4. If connecting a second, or a third Expansion Module, repeat steps 2 to 4. Note: The second Expansion Module is attached to the right side of the first Expansion Module. The third E...

[Page 14] Nortel 1120E

Setup and assembly 14 Expansion Module startup initialization Once the Expansion Module has been installed and powered up on the IP Phone, the Expansion Module initializes. Table 1 lists the initialization process for the Expansion Module. Using the...

[Page 15] Nortel 1120E

Setup and assembly 15 Adjusting the tilt base The Expansion Module stand provides a continuous tilt adjustment so the tilt angle matches the IP Phone stand angle while accommodating variations in the desk surface. A clamp mechanism is used to unloc...

[Page 16] Nortel 1120E

Controls and settings 16 Controls and settings When an Expansion Module is installed on an IP Phone, the controls and settings of the IP Phone control both the IP Phone and the Expansion Module. Use the Telephone Options menu on the attached IP Pho...

[Page 17] Nortel 1120E

Controls and settings 17 Press the Services key to access the following menu items: • Display diagnostics • Set Info Display diagnostics Use the Up/Down navigation keys to scroll the Display diagnostics menu to access the following screens/diagn...

[Page 18] Nortel 1120E

Controls and settings 18 Table 2 shows the display diagnostic operation on the IP Phones and the Expansion Module. Table 2: Display diagnostic operation on the IP Phone and the Expansion Module Diagnostic step IP Phone DN/feature key display area ...

[Page 19] Nortel 1120E

Regulatory and safety information 19 Regulatory and safety information This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reas...

[Page 20] Nortel 1120E

Regulatory and safety information 20 この装置は、情報処理装置等電波障害自主規制協議会（ＶＣＣＩ）の基準に基づくクラス B 情報技術装置です。この装置は、家庭環境で使用することを目的と...

[Page 21] Nortel 1120E

Regulatory and safety information 21 DenAn regulatory notice for Japan ...

[Page 22] Nortel 1120E

Regulatory and safety information 22 ...

[Page 23] Nortel 1120E

Terms you should know 23 Terms you should know Accessory Expansion Module A built-in port on an Nortel IP Phone that enables accessory components (such as a Expansion Module for IP Phones 1100 Series) to connect and communicate with the IP Phone. D...

[Page 24] Nortel 1120E

Terms you should know 24 ...

[Page 25] Nortel 1120E

Index 25 Index A Accessory Expansion Module (AEM) 23 Auto Dial 23 D Directory Number (DN) 23 Display 9 Display label 9 DN 23 F Feature display 23 Features 8 I Initialize the IP Phone KEM 16 Install the IP Phone KEM 10 IP Phone 2002 7 IP Phone 2004 7...

[Page 26] Nortel 1120E

Index 26 ...

[Page 27] Nortel 1120E

...

[Page 28] Nortel 1120E

Nortel Communication Server 1000 Expansion Module for IP Phone 1100 Series User Guide Copyright © 2006 Nortel Networks. All Rights Reserved. The information in this document is subject to change without notice. The statements, configurations, tech...