Siemens TC35i User Manual

Download or browse on-line these Operation & User’s Manual for Siemens TC35i Terminal Cell Phone Accessories, Modem.

Siemens TC35i Terminal Manual Information:

This manual for Siemens TC35i Terminal, given in the PDF format, is available for free online viewing and download without logging on. The guide contains 439 pages, and the size of the file at download is . The document type is Operation & User’s Manual.

Download Manual

More Manuals:

In case you failed to obtain relevant information in this document, please, look through related operating manuals and user instructions for Siemens TC35i Terminal. Just click one of the links below to go to the selected manual:

Summary of Contents:

[Page 1] Siemens TC35i Terminal

m o bi l e TC35i TC35i Terminal Siemens Cellular Engine Version: 02.07 DocId: TC35i_ATC_V02.07 ...

[Page 2] Siemens TC35i Terminal

TC35i AT Command Set TC35i_ATC_V02.07 Page 2 of 439 1/30/04 Confidential / Released s m obil e General Notes Product is deemed accepted by recipient and is provided without interface to recipient’s products. The documen- tation and/or product a...

[Page 3] Siemens TC35i Terminal

TC35i AT Command Set Contents s m obil e TC35i_ATC_V02.07 Page 3 of 439 1/30/04 Confidential / Released 1. Introduction.....................................................................................................................................

[Page 4] Siemens TC35i Terminal

TC35i AT Command Set Contents s m obil e TC35i_ATC_V02.07 Page 4 of 439 1/30/04 Confidential / Released 2.13 AT+CSCS Select TE character set ............................................................................................. 51 2.14 AT^SCF...

[Page 5] Siemens TC35i Terminal

TC35i AT Command Set Contents s m obil e TC35i_ATC_V02.07 Page 5 of 439 1/30/04 Confidential / Released 5.4 AT+CLCK Facility lock .............................................................................................................. 119 5.5 ...

[Page 6] Siemens TC35i Terminal

TC35i AT Command Set Contents s m obil e TC35i_ATC_V02.07 Page 6 of 439 1/30/04 Confidential / Released 7.25 AT+CSNS Single Numbering Scheme...................................................................................... 178 7.26 AT^SCNI List ...

[Page 7] Siemens TC35i Terminal

TC35i AT Command Set Contents s m obil e TC35i_ATC_V02.07 Page 7 of 439 1/30/04 Confidential / Released 10.4 AT+FBOR Query data bit order.................................................................................................248 10.5 AT+FCI...

[Page 8] Siemens TC35i Terminal

TC35i AT Command Set Contents s m obil e TC35i_ATC_V02.07 Page 8 of 439 1/30/04 Confidential / Released 11.15 AT+CSDH Show SMS text mode parameters........................................................................... 303 11.16 AT+CSMP Set SMS ...

[Page 9] Siemens TC35i Terminal

TC35i AT Command Set Contents s m obil e TC35i_ATC_V02.07 Page 9 of 439 1/30/04 Confidential / Released 15.4 AT+CLVL Loudspeaker volume level........................................................................................ 367 15.5 AT+CMUT Mu...

[Page 10] Siemens TC35i Terminal

TC35i AT Command Set List of Tables s m obil e TC35i_ATC_V02.07 Page 10 of 439 1/30/04 Confidential / Released Table 1.1: Product specific use of AT commands ...................................................................................... 12 T...

[Page 11] Siemens TC35i Terminal

TC35i AT Command Set List of Figures s m obil e TC35i_ATC_V02.07 Page 11 of 439 1/30/04 Confidential / Released Figure 1.1: Main character table of GSM 03.38 alphabet ............................................................................. 20 Fi...

[Page 12] Siemens TC35i Terminal

TC35i AT Command Set 1. Introduction s m obil e TC35i_ATC_V02.07 Page 12 of 439 1/30/04 Confidential / Released 1. Introduction 1.1 Scope of the document This document presents the AT Command Set for the Siemens Cellular Engines TC35i Version...

[Page 13] Siemens TC35i Terminal

TC35i AT Command Set 1.2 Related documents s m obil e TC35i_ATC_V02.07 Page 13 of 439 1/30/04 Confidential / Released 1.2 Related documents [1] Release Notes: TC35i, Version 02.07 [2] TC35i Hardware Interface Description, Version 02.07 [3] Remote-S...

[Page 14] Siemens TC35i Terminal

TC35i AT Command Set 1.3 Document conventions s m obil e TC35i_ATC_V02.07 Page 14 of 439 1/30/04 Confidential / Released 1.3 Document conventions Throughout the document, the GSM engines are referred to as ME (Mobile Equipment), MS (Mobile Station)...

[Page 15] Siemens TC35i Terminal

TC35i AT Command Set 1.3 Document conventions s m obil e TC35i_ATC_V02.07 Page 15 of 439 1/30/04 Confidential / Released 1.3.2 Superscript notation for parameters and values Table 1.2: Symbols used to indicate the correlations with other commands ...

[Page 16] Siemens TC35i Terminal

TC35i AT Command Set 1.4 AT command syntax s m obil e TC35i_ATC_V02.07 Page 16 of 439 1/30/04 Confidential / Released 1.4 AT command syntax The "AT" or "at" prefix must be set at the beginning of each command line. To terminate ...

[Page 17] Siemens TC35i Terminal

TC35i AT Command Set 1.4 AT command syntax s m obil e TC35i_ATC_V02.07 Page 17 of 439 1/30/04 Confidential / Released Example 1: Omitting parameters in the middle of a string Example 2: Using default parameter values for optional parameters 1.4.2...

[Page 18] Siemens TC35i Terminal

TC35i AT Command Set 1.5 Supported character sets s m obil e TC35i_ATC_V02.07 Page 18 of 439 1/30/04 Confidential / Released 1.5 Supported character sets The ME supports two character sets: GSM 03.38 (7 bit, also referred to as GSM alphabet or SMS ...

[Page 19] Siemens TC35i Terminal

TC35i AT Command Set 1.5 Supported character sets s m obil e TC35i_ATC_V02.07 Page 19 of 439 1/30/04 Confidential / Released CAUTION: Often, the editors of terminal programs do not recognize escape sequences. In this case, an escape sequence will b...

[Page 20] Siemens TC35i Terminal

TC35i AT Command Set 1.5 Supported character sets s m obil e TC35i_ATC_V02.07 Page 20 of 439 1/30/04 Confidential / Released 1.5.1 GSM alphabet tables and UCS2 character values This section provides tables for the GSM 03.38 alphabet supported by th...

[Page 21] Siemens TC35i Terminal

TC35i AT Command Set 1.5 Supported character sets s m obil e TC35i_ATC_V02.07 Page 21 of 439 1/30/04 Confidential / Released 1) This code value is reserved for the extension to another extension table. On receipt of this code, a receiving entity sh...

[Page 22] Siemens TC35i Terminal

TC35i AT Command Set 1.5 Supported character sets s m obil e TC35i_ATC_V02.07 Page 22 of 439 1/30/04 Confidential / Released In the event that an MS receives a code where a symbol is not represented in figure Extension character table of GSM 03.38 ...

[Page 23] Siemens TC35i Terminal

TC35i AT Command Set 1.5 Supported character sets s m obil e TC35i_ATC_V02.07 Page 23 of 439 1/30/04 Confidential / Released 1.5.2.2 Implementing input of Terminal data to SIM (direction TE to ME) Case 1 Data will be packed to 7-bit. Maximum te...

[Page 24] Siemens TC35i Terminal

TC35i AT Command Set 1.5 Supported character sets s m obil e TC35i_ATC_V02.07 Page 24 of 439 1/30/04 Confidential / Released Case 6 Two bytes are needed. Maximum text length: 280 characters Example: "00410042" ® 0x00,0x41,0x00,0x21 Probl...

[Page 25] Siemens TC35i Terminal

TC35i AT Command Set 1.6 Flow Control s m obil e TC35i_ATC_V02.07 Page 25 of 439 1/30/04 Confidential / Released 1.6 Flow Control Flow control is essential to prevent loss of data or avoid errors when, in a data or fax call, the sending device is t...

[Page 26] Siemens TC35i Terminal

TC35i AT Command Set 1.7 Unsolicited Result Code Presentation s m obil e TC35i_ATC_V02.07 Page 26 of 439 1/30/04 Confidential / Released 1.7 Unsolicited Result Code Presentation URC stands for Unsolicited Result Code and is a report message issued ...

[Page 27] Siemens TC35i Terminal

TC35i AT Command Set 1.8 Errors and Messages s m obil e TC35i_ATC_V02.07 Page 27 of 439 1/30/04 Confidential / Released 1.8 Errors and Messages The final result codes "+CME ERROR: <err>" and "+CMS ERROR: <err>" indic...

[Page 28] Siemens TC35i Terminal

TC35i AT Command Set 2. Configuration Commands s m obil e TC35i_ATC_V02.07 Page 28 of 439 1/30/04 Confidential / Released 2. Configuration Commands The AT Commands described in this chapter allow the external application to determine the TC35i&apo...

[Page 29] Siemens TC35i Terminal

TC35i AT Command Set 2.2 AT&V s m obil e TC35i_ATC_V02.07 Page 29 of 439 1/30/04 Confidential / Released 2.2 AT&V Display current configuration Syntax Command Description TA returns the current parameter setting. The configuration varies de...

[Page 30] Siemens TC35i Terminal

TC35i AT Command Set 2.2 AT&V s m obil e TC35i_ATC_V02.07 Page 30 of 439 1/30/04 Confidential / Released Table 2.1: Current configuration on ASC0 / MUX channel 1 (example) PIN authentication done No PIN authentication ACTIVE PROFILE: E1 Q0 V1 ...

[Page 31] Siemens TC35i Terminal

TC35i AT Command Set 2.2 AT&V s m obil e TC35i_ATC_V02.07 Page 31 of 439 1/30/04 Confidential / Released Table 2.2: Current configuration on MUX channels 2 and 3 (example) PIN authentication done No PIN authentication ACTIVE PROFILE: E1 Q0 V1...

[Page 32] Siemens TC35i Terminal

TC35i AT Command Set 2.3 AT&W s m obil e TC35i_ATC_V02.07 Page 32 of 439 1/30/04 Confidential / Released 2.3 AT&W Stores current configuration to user defined profile Syntax Command Description TA stores the currently set parameters to a us...

[Page 33] Siemens TC35i Terminal

TC35i AT Command Set 2.4 ATQ s m obil e TC35i_ATC_V02.07 Page 33 of 439 1/30/04 Confidential / Released 2.4 ATQ Set result code presentation mode Syntax Command Description This parameter setting determines whether or not the TA transmits any resul...

[Page 34] Siemens TC35i Terminal

TC35i AT Command Set 2.5 ATV s m obil e TC35i_ATC_V02.07 Page 34 of 439 1/30/04 Confidential / Released 2.5 ATV Set result code format mode This command determines the contents of header and trailer transmitted with AT command result codes and info...

[Page 35] Siemens TC35i Terminal

TC35i AT Command Set 2.5 ATV s m obil e TC35i_ATC_V02.07 Page 35 of 439 1/30/04 Confidential / Released CONNECT 2400 10 Link with 2400 bps CONNECT 4800 30 Link with 4800 bps CONNECT 9600 32 Link with 9600 bps CONNECT 14400 33 Link with 14400 bps CO...

[Page 36] Siemens TC35i Terminal

TC35i AT Command Set 2.6 ATX s m obil e TC35i_ATC_V02.07 Page 36 of 439 1/30/04 Confidential / Released 2.6 ATX Set CONNECT result code format and call monitoring Syntax Command Description This parameter setting determines whether or not the TA de...

[Page 37] Siemens TC35i Terminal

TC35i AT Command Set 2.7 AT\V s m obil e TC35i_ATC_V02.07 Page 37 of 439 1/30/04 Confidential / Released 2.7 AT\V Set CONNECT result code format Syntax Parameter Description [0] CONNECT <text> result code returned without RLP trailer 1 (&am...

[Page 38] Siemens TC35i Terminal

TC35i AT Command Set 2.8 ATZ s m obil e TC35i_ATC_V02.07 Page 38 of 439 1/30/04 Confidential / Released 2.8 ATZ Set all current parameters to user defined profile Syntax Command Description TA sets all current parameters to the user profile stored ...

[Page 39] Siemens TC35i Terminal

TC35i AT Command Set 2.9 AT+CFUN s m obil e TC35i_ATC_V02.07 Page 39 of 439 1/30/04 Confidential / Released 2.9 AT+CFUN Set phone functionality This command serves to control the functionality level of the ME. It can be used to reset the ME, to cho...

[Page 40] Siemens TC35i Terminal

TC35i AT Command Set 2.9 AT+CFUN s m obil e TC35i_ATC_V02.07 Page 40 of 439 1/30/04 Confidential / Released Command Description The test command returns the values of the supported parameters. The read command returns the current functionality val...

[Page 41] Siemens TC35i Terminal

TC35i AT Command Set 2.9 AT+CFUN s m obil e TC35i_ATC_V02.07 Page 41 of 439 1/30/04 Confidential / Released The parameter can only be used if the serial interface is enabled. Due to the command syntax, you need to enter parameter <fun>, fol...

[Page 42] Siemens TC35i Terminal

TC35i AT Command Set 2.9 AT+CFUN s m obil e TC35i_ATC_V02.07 Page 42 of 439 1/30/04 Confidential / Released EXAMPLE 2 To set the ME to NON-CYCLIC SLEEP mode enter When, for example, an SMS is being received and indicated by an unsolicited resul...

[Page 43] Siemens TC35i Terminal

TC35i AT Command Set 2.9 AT+CFUN s m obil e TC35i_ATC_V02.07 Page 43 of 439 1/30/04 Confidential / Released Unsolicited Result Code (URC) Yes Yes No Incoming voice or data call Yes Yes No Any AT command (incl. outgoing SMS, voice or data...

[Page 44] Siemens TC35i Terminal

TC35i AT Command Set 2.10 AT^SMSO s m obil e TC35i_ATC_V02.07 Page 44 of 439 1/30/04 Confidential / Released 2.10 AT^SMSO Switch off mobile station Syntax Unsolicited Result Code ^SHUTDOWN Indicates that the power-off procedure is finished and the ...

[Page 45] Siemens TC35i Terminal

TC35i AT Command Set 2.11 AT+GCAP s m obil e TC35i_ATC_V02.07 Page 45 of 439 1/30/04 Confidential / Released 2.11 AT+GCAP Request complete TA capabilities list Syntax Command Description TA reports a list of additional capabilities. Parameter De...

[Page 46] Siemens TC35i Terminal

TC35i AT Command Set 2.12 AT+CMEE s m obil e TC35i_ATC_V02.07 Page 46 of 439 1/30/04 Confidential / Released 2.12 AT+CMEE Report mobile equipment error Syntax Command Description This command controls the presentation of the result code +CME ERROR:...

[Page 47] Siemens TC35i Terminal

TC35i AT Command Set 2.12 AT+CMEE s m obil e TC35i_ATC_V02.07 Page 47 of 439 1/30/04 Confidential / Released Notes • The possible error result codes are listed in 2.12.1 and 2.12.2. • In multiplex mode (see AT+CMUX) the setting applies only t...

[Page 48] Siemens TC35i Terminal

TC35i AT Command Set 2.12 AT+CMEE s m obil e TC35i_ATC_V02.07 Page 48 of 439 1/30/04 Confidential / Released 2.12.2 Summary of CMS ERRORS related to GSM 07.05 27 invalid characters in dial string 30 no network service 31 Network timeout 32 Netw...

[Page 49] Siemens TC35i Terminal

TC35i AT Command Set 2.12 AT+CMEE s m obil e TC35i_ATC_V02.07 Page 49 of 439 1/30/04 Confidential / Released 41 Temporary failure 42 Congestion 47 Resources unavailable, unspecified 50 Requested facility not subscribed 69 Requested facility no...

[Page 50] Siemens TC35i Terminal

TC35i AT Command Set 2.12 AT+CMEE s m obil e TC35i_ATC_V02.07 Page 50 of 439 1/30/04 Confidential / Released 213 SIM data download error 255 Unspecified error cause 300 ME failure 301 SMS service of ME reserved 302 Operation not allowed 303 O...

[Page 51] Siemens TC35i Terminal

TC35i AT Command Set 2.13 AT+CSCS s m obil e TC35i_ATC_V02.07 Page 51 of 439 1/30/04 Confidential / Released 2.13 AT+CSCS Select TE character set Syntax Command Description Write command informs TA which character set <chset> is used by the T...

[Page 52] Siemens TC35i Terminal

TC35i AT Command Set 2.13 AT+CSCS s m obil e TC35i_ATC_V02.07 Page 52 of 439 1/30/04 Confidential / Released Notes • Also see chapter "Supported character sets". • When TA-TE interface is set to 8-bit operation and used TE alphabet is...

[Page 53] Siemens TC35i Terminal

TC35i AT Command Set 2.14 AT^SCFG s m obil e TC35i_ATC_V02.07 Page 53 of 439 1/30/04 Confidential / Released 2.14 AT^SCFG Extended Configuration Settings This command can be used to query and configure various settings of the TC35i. Syntax Unsolic...

[Page 54] Siemens TC35i Terminal

TC35i AT Command Set 2.14 AT^SCFG s m obil e TC35i_ATC_V02.07 Page 54 of 439 1/30/04 Confidential / Released Command Description The read command returns a list of all supported parameter and their current values. The write command allows to query...

[Page 55] Siemens TC35i Terminal

TC35i AT Command Set 2.14 AT^SCFG s m obil e TC35i_ATC_V02.07 Page 55 of 439 1/30/04 Confidential / Released AutoExec AT command String This parameter specifies the automatically launched AT command. It is executed as entered online, e.g. com- mand...

[Page 56] Siemens TC35i Terminal

TC35i AT Command Set 2.14 AT^SCFG s m obil e TC35i_ATC_V02.07 Page 56 of 439 1/30/04 Confidential / Released Value will be saved while switching off the TC35i via AT commands (e.g. AT+CFUN or AT^SMSO) and restored on next power up. AutoExec AT Com...

[Page 57] Siemens TC35i Terminal

TC35i AT Command Set 2.14 AT^SCFG s m obil e TC35i_ATC_V02.07 Page 57 of 439 1/30/04 Confidential / Released Examples EXAMPLE 1 Enable sending of a short message (SMS) on next DTR activation (OFF-ON transition). Sent SMS is assumed to be stored ...

[Page 58] Siemens TC35i Terminal

TC35i AT Command Set 2.14 AT^SCFG s m obil e TC35i_ATC_V02.07 Page 58 of 439 1/30/04 Confidential / Released EXAMPLE 3 Switch off the TC35i after three minutes without restart. For details regarding software controlled power down refer to AT+C...

[Page 59] Siemens TC35i Terminal

TC35i AT Command Set 2.15 AT^SM20 s m obil e TC35i_ATC_V02.07 Page 59 of 439 1/30/04 Confidential / Released 2.15 AT^SM20 Set M20 compatibility mode Syntax Command Description M20 is an earlier, widely used SIEMENS GSM engine. The AT^SM20 command s...

[Page 60] Siemens TC35i Terminal

TC35i AT Command Set 2.15 AT^SM20 s m obil e TC35i_ATC_V02.07 Page 60 of 439 1/30/04 Confidential / Released Parameter Description Call setup response mode Applies only to voice calls. 0 Set compatibility to Siemens mobile phones. ME will return &q...

[Page 61] Siemens TC35i Terminal

TC35i AT Command Set 3. Status Control Commands s m obil e TC35i_ATC_V02.07 Page 61 of 439 1/30/04 Confidential / Released 3. Status Control Commands The AT Commands described in this chapter allow the external application to obtain various status...

[Page 62] Siemens TC35i Terminal

TC35i AT Command Set 3.1 AT+CMER s m obil e TC35i_ATC_V02.07 Page 62 of 439 1/30/04 Confidential / Released Unsolicited Result Code +CIEV: <indDescr>, <indValue> A value of an indicator has changed. Command Description The read comman...

[Page 63] Siemens TC35i Terminal

TC35i AT Command Set 3.1 AT+CMER s m obil e TC35i_ATC_V02.07 Page 63 of 439 1/30/04 Confidential / Released Note • If the ME operates on different instances (MUX channels 1, 2, 3) avoid different settings for routing and indi- cating SMS. For exa...

[Page 64] Siemens TC35i Terminal

TC35i AT Command Set 3.2 AT+CIND s m obil e TC35i_ATC_V02.07 Page 64 of 439 1/30/04 Confidential / Released 3.2 AT+CIND Indicator control This command controls information about status changes via URC presentation of the $product; or connected item...

[Page 65] Siemens TC35i Terminal

TC35i AT Command Set 3.2 AT+CIND s m obil e TC35i_ATC_V02.07 Page 65 of 439 1/30/04 Confidential / Released Command Description The read command returns the status of the ME indicators. The write command is used to switch the event report for each...

[Page 66] Siemens TC35i Terminal

TC35i AT Command Set 3.2 AT+CIND s m obil e TC35i_ATC_V02.07 Page 66 of 439 1/30/04 Confidential / Released “smsfull“ A short message memory storage in the MT has become full (1) or memory locations are available (0), i.e. range is (0-1) “rs...

[Page 67] Siemens TC35i Terminal

TC35i AT Command Set 3.2 AT+CIND s m obil e TC35i_ATC_V02.07 Page 67 of 439 1/30/04 Confidential / Released +CIEV: smsfull,0 +CIEV: rssi,5 Receive with full signal field strength ATD0123456; Make a call. OK +CIEV: sounder,1 Receive a set of "+...

[Page 68] Siemens TC35i Terminal

TC35i AT Command Set 3.3 AT^SIND s m obil e TC35i_ATC_V02.07 Page 68 of 439 1/30/04 Confidential / Released 3.3 AT^SIND Extended Indicator Control AT^SIND supplies extended event indicator control and • offers greater flexibility than standard ...

[Page 69] Siemens TC35i Terminal

TC35i AT Command Set 3.3 AT^SIND s m obil e TC35i_ATC_V02.07 Page 69 of 439 1/30/04 Confidential / Released Command Description The read command provides a list of all indicators supported by AT+CIND and AT^SIND. Each indicator is rep- resented wit...

[Page 70] Siemens TC35i Terminal

TC35i AT Command Set 3.3 AT^SIND s m obil e TC35i_ATC_V02.07 Page 70 of 439 1/30/04 Confidential / Released • Indicator event reports are controlled via AT+CMER. • Indicators defined by AT^SIND remain deregistered until explicitly enabled. �...

[Page 71] Siemens TC35i Terminal

TC35i AT Command Set 3.4 AT+CEER s m obil e TC35i_ATC_V02.07 Page 71 of 439 1/30/04 Confidential / Released 3.4 AT+CEER Extended error report Syntax Command Description TA returns an extended error report of the reason for the last •call release...

[Page 72] Siemens TC35i Terminal

TC35i AT Command Set 3.4 AT+CEER s m obil e TC35i_ATC_V02.07 Page 72 of 439 1/30/04 Confidential / Released Release cause for last Supplementary Service call (listed in subclause 3.4.9) or last call related use of a Sup- plementary Service (listed ...

[Page 73] Siemens TC35i Terminal

TC35i AT Command Set 3.4 AT+CEER s m obil e TC35i_ATC_V02.07 Page 73 of 439 1/30/04 Confidential / Released EXAMPLE 3 The user attempts to activate call barring. Activation is denied by the network since the password is blocked after previous fa...

[Page 74] Siemens TC35i Terminal

TC35i AT Command Set 3.4 AT+CEER s m obil e TC35i_ATC_V02.07 Page 74 of 439 1/30/04 Confidential / Released 3.4.2 GSM release cause for L3 Radio Resource (RR) 3.4.3 SIEMENS release cause for L3 Radio Resource (RR) 50 GSM cause for Session Manageme...

[Page 75] Siemens TC35i Terminal

TC35i AT Command Set 3.4 AT+CEER s m obil e TC35i_ATC_V02.07 Page 75 of 439 1/30/04 Confidential / Released 3.4.4 GSM release cause for Mobility Management (MM) 4 SABM failure 5 Radio link counter expiry or PerformAbnormalRelease 6 Confirm ABORT...

[Page 76] Siemens TC35i Terminal

TC35i AT Command Set 3.4 AT+CEER s m obil e TC35i_ATC_V02.07 Page 76 of 439 1/30/04 Confidential / Released 3.4.5 SIEMENS release cause for L3 Mobility Management (MM) 3.4.6 GSM release cause for L3 Call Control (CC) Number Description 1 No SIM av...

[Page 77] Siemens TC35i Terminal

TC35i AT Command Set 3.4 AT+CEER s m obil e TC35i_ATC_V02.07 Page 77 of 439 1/30/04 Confidential / Released Resource unavailable class 34 No circuit/channel available 38 Network out of order 41 Temporary failure 42 Switching equipment congestio...

[Page 78] Siemens TC35i Terminal

TC35i AT Command Set 3.4 AT+CEER s m obil e TC35i_ATC_V02.07 Page 78 of 439 1/30/04 Confidential / Released 3.4.7 SIEMENS release cause for L3 Call Control (CC) 3.4.8 SIEMENS release cause for L3 Advice of Charge (AOC) 3.4.9 GSM Release cause for S...

[Page 79] Siemens TC35i Terminal

TC35i AT Command Set 3.4 AT+CEER s m obil e TC35i_ATC_V02.07 Page 79 of 439 1/30/04 Confidential / Released 13 CallBarred 15 CUGReject 16 IllegalSSOperation 17 SSErrorStatus 18 SSNotAvailable 19 SSSubscriptionViolation 20 SSIncompatibility 2...

[Page 80] Siemens TC35i Terminal

TC35i AT Command Set 3.4 AT+CEER s m obil e TC35i_ATC_V02.07 Page 80 of 439 1/30/04 Confidential / Released 3.4.10 SIEMENS release cause for Call-related Supplementary Services (CRSS) 313 Mistyped Parameter Return Error Problem Codes 314 Unrecog...

[Page 81] Siemens TC35i Terminal

TC35i AT Command Set 3.4 AT+CEER s m obil e TC35i_ATC_V02.07 Page 81 of 439 1/30/04 Confidential / Released 95 Semantically incorrect message 96 Invalid mandatory information 97 Message type non-existant or not implemented 98 Message type not c...

[Page 82] Siemens TC35i Terminal

TC35i AT Command Set 3.5 ATS18 s m obil e TC35i_ATC_V02.07 Page 82 of 439 1/30/04 Confidential / Released 3.5 ATS18 Extended call release report Syntax Command Description This command enables or disables the presentation of extended call release r...

[Page 83] Siemens TC35i Terminal

TC35i AT Command Set 3.5 ATS18 s m obil e TC35i_ATC_V02.07 Page 83 of 439 1/30/04 Confidential / Released Note • The command applies only to circuit switched data and fax calls. For voice calls extended call release reports can be retrieved using...

[Page 84] Siemens TC35i Terminal

TC35i AT Command Set 3.6 AT+CPAS s m obil e TC35i_ATC_V02.07 Page 84 of 439 1/30/04 Confidential / Released 3.6 AT+CPAS Mobile equipment activity status Syntax Command Description TA returns the activity status of ME. Parameter Description 0 rea...

[Page 85] Siemens TC35i Terminal

TC35i AT Command Set 3.7 AT+WS46 s m obil e TC35i_ATC_V02.07 Page 85 of 439 1/30/04 Confidential / Released 3.7 AT+WS46 Select wireless network Syntax Parameter Description 12 GSM digital cellular Test Command AT+WS46=? Response(s) +WS46: (list o...

[Page 86] Siemens TC35i Terminal

TC35i AT Command Set 4. Serial Interface Control Commands s m obil e TC35i_ATC_V02.07 Page 86 of 439 1/30/04 Confidential / Released 4. Serial Interface Control Commands The AT Commands described in this chapter allow the external application to d...

[Page 87] Siemens TC35i Terminal

TC35i AT Command Set 4.2 AT&C s m obil e TC35i_ATC_V02.07 Page 87 of 439 1/30/04 Confidential / Released 4.2 AT&C Set circuit Data Carrier Detect (DCD) function mode Syntax Command Description This parameter determines how the state of circ...

[Page 88] Siemens TC35i Terminal

TC35i AT Command Set 4.3 AT&D s m obil e TC35i_ATC_V02.07 Page 88 of 439 1/30/04 Confidential / Released 4.3 AT&D Set circuit Data Terminal Ready (DTR) function mode Syntax Command Description This parameter determines how the TA responds w...

[Page 89] Siemens TC35i Terminal

TC35i AT Command Set 4.4 AT%D s m obil e TC35i_ATC_V02.07 Page 89 of 439 1/30/04 Confidential / Released 4.4 AT%D Automatic Dial on DTR Line Activation Syntax Command Description Enable and disable automatic dialling on DTR line activation. A more...

[Page 90] Siemens TC35i Terminal

TC35i AT Command Set 4.4 AT%D s m obil e TC35i_ATC_V02.07 Page 90 of 439 1/30/04 Confidential / Released To enable auto dialling for data and voice calls after ME's power on it is necessary to disable PIN authorization with the command AT+CLC...

[Page 91] Siemens TC35i Terminal

TC35i AT Command Set 4.4 AT%D s m obil e TC35i_ATC_V02.07 Page 91 of 439 1/30/04 Confidential / Released • Command settings are storable via AT&W. • Exec command is not supported during multiplex mode ( AT+CMUX). Example Setup the first e...

[Page 92] Siemens TC35i Terminal

TC35i AT Command Set 4.5 AT&S s m obil e TC35i_ATC_V02.07 Page 92 of 439 1/30/04 Confidential / Released 4.5 AT&S Set circuit Data Set Ready (DSR) function mode Syntax Command Description This parameter determines how the TA sets circuit 10...

[Page 93] Siemens TC35i Terminal

TC35i AT Command Set 4.6 ATE s m obil e TC35i_ATC_V02.07 Page 93 of 439 1/30/04 Confidential / Released 4.6 ATE Enable command echo Syntax Command Description This setting determines whether or not the TA echoes characters received from TE during c...

[Page 94] Siemens TC35i Terminal

TC35i AT Command Set 4.7 AT+ICF s m obil e TC35i_ATC_V02.07 Page 94 of 439 1/30/04 Confidential / Released 4.7 AT+ICF Serial Interface Character Framing The command AT+ICF can be used to set or query the character framing. Syntax Command Descripti...

[Page 95] Siemens TC35i Terminal

TC35i AT Command Set 4.7 AT+ICF s m obil e TC35i_ATC_V02.07 Page 95 of 439 1/30/04 Confidential / Released 2 8 data 1 parity 1 stop [3] 8 data 0 parity 1 stop 5 7 data 1 parity 1 stop Specifies the method of calculating the parity bit, if a parity ...

[Page 96] Siemens TC35i Terminal

TC35i AT Command Set 4.8 AT+IFC s m obil e TC35i_ATC_V02.07 Page 96 of 439 1/30/04 Confidential / Released 4.8 AT+IFC Set Flow Control separately for data directions The command AT+IFC can be used to set or query the data flow control separately fo...

[Page 97] Siemens TC35i Terminal

TC35i AT Command Set 4.8 AT+IFC s m obil e TC35i_ATC_V02.07 Page 97 of 439 1/30/04 Confidential / Released 1 XON/XOFF, terminate flow control in the Cellular Engine 2RTS line 3 XON/XOFF, evaluate flow control in the Cellular Engine and pass it thro...

[Page 98] Siemens TC35i Terminal

TC35i AT Command Set 4.9 AT+ILRR s m obil e TC35i_ATC_V02.07 Page 98 of 439 1/30/04 Confidential / Released 4.9 AT+ILRR Set TE-TA local rate reporting The command AT+ILRR controls whether or not the intermediate result code "+ILRR" is tra...

[Page 99] Siemens TC35i Terminal

TC35i AT Command Set 4.9 AT+ILRR s m obil e TC35i_ATC_V02.07 Page 99 of 439 1/30/04 Confidential / Released Parameter Description 0 (&F) Disables reporting of local port rate 1 Enables reporting of local port rate port rate setting on connect...

[Page 100] Siemens TC35i Terminal

TC35i AT Command Set 4.10 AT+IPR s m obil e TC35i_ATC_V02.07 Page 100 of 439 1/30/04 Confidential / Released 4.10 AT+IPR Set fixed local rate The command AT+IPR can be used to set or query the DTE-DCE interface bit rate. Syntax Command Description...