NexxTech CCD-420 User Manual

[Page 1] NexxTech CCD-420

WIRELESS 2.5” COLOR TFT LCD BABY MONITORING SYSTEM User’s Manual - Portable 2.5” Color TFT LCD with Receiver - Wireless Color Camera PLEASE READ CAREFULLY AND SAVE This manual contains important information about this product’s operation....

[Page 2] NexxTech CCD-420

Wireless 2.5” Color TFT LCD Monitoring System Model No.: CCD-420 Contents Safety and Hazard Notices ..................................................................................................................1 FCC/CE Warning .................

[Page 3] NexxTech CCD-420

1 Important Safety Instructions * Use only a (110V - 240 Volt / 50 hz -or 60 Hz) adapter for the product to plug into a standard wall outlet receptacle. Never attempt to operate the product with a different voltage. * Ensure all electrical and/o...

[Page 4] NexxTech CCD-420

2 work or exchanging parts or modules, you must separate the product(s) from any power sources first. Only an expert familiar with the risks and any pertinent regulations should maintain/repair the product(s). * Never plug-in or unplug the product...

[Page 5] NexxTech CCD-420

3 Installing the Camera ATTENTION! Prior to drilling and inserting the screws, make sure that there are no electric cables pipes, etc. in the wall that could be damaged. POWER ON/OFF CAMERA ON/OFF PWR. BAT.LO 1 2 3 4 5 6 7 8 9 10 11 D C I ...

[Page 6] NexxTech CCD-420

4 Connecting the Camera Connect the small voltage plug of the power unit to the voltage supply jack of the camera. Pay attention to the correct output voltage of 7.5V DC! • Insert the plug-in power unit into a suitable wall outlet. • The camer...

[Page 7] NexxTech CCD-420

5 System Installation When installing the camera, check the reception of the monitor before final installation. Have someone hold the camera in the area to be monitored. Have another person move the monitor to a variety of locations throughout the ...

[Page 8] NexxTech CCD-420

6 System Installation (con’t) Additional Notice - When installing the camera, check the reception of the receiver before the final installation. Have someone hold the camera in the area of to be monitored and another person to check the receptio...

[Page 9] NexxTech CCD-420

7 Technical Data Camera Receiver Operating Voltage 7.5V DC (plug-in power unit) battery operation 2 x “AA” Alkaline 5V DC (plug-in power unit) battery operation 4 x “AAA” Alkaline Current Consumption 200 mA 600 mA Transmitting Frequency 2...

[Page 10] NexxTech CCD-420

8 Disposal If the camera system no longer functions properly and cannot be repaired, it must be disposed of according to valid statutory regulations for your area. Disposing of spent batteries and toxic materials Troubleshooting You can easily...

[Page 11] NexxTech CCD-420

9 Who is Providing This Warranty? • Orbyx Electronics, LLC (“Orbyx”), as the distributor of this Nexxtech TM product (your “Product”). What Does This Warranty Cover? • This warranty covers defects in materials or workman - ship in you...