ACME LED-MS150 User Manual

[Page 1] ACME LED-MS150

LED-MS150 User Manual Please read the instruction carefully before use ...

[Page 2] ACME LED-MS150

CONTENTS 1. Safety Instruction ................................................................................................... 2 2. Technical Specifications ....................................................................................

[Page 3] ACME LED-MS150

1. Safety Instruction WARNING Please keep this User Guide for future consultation. If you sell the unit to another user, be sure that they also receive this instruction manual.  Unpack and check carefully there is no transporta...

[Page 4] ACME LED-MS150

moisture.  DO NOT open the unit within five minutes after switching off.  The housing, the lenses, or the ultraviolet filter must be replaced if they are visibly damaged. Caution There are no user serviceable parts inside the unit. DO...

[Page 5] ACME LED-MS150

 Weight: 5.3Kgs  Dimension: 212 x 174 x 352mm 3. How To Set The Unit 3.1 Fixture Overview 1. LED: DMX On DMX input present MASTER On Master Mode SLAVE On Slave Mode ...

[Page 6] ACME LED-MS150

DOWN To go backward in the selected functions UP To go forward in the selected functions ENTER To confirm the selected functions 3. LED Display: Used to show the various menus and the selected functions. 4. DMX IN/OUT: ...

[Page 7] ACME LED-MS150

3.2 Gobo Wheel Rotation gobo wheel 3.3 Main Function To select any of the given functions, press the MENU button up to when the required one is showing on the display. Select the function by ENTER button and th...

[Page 8] ACME LED-MS150

FIXTURE HOURS MENU SOFTWARE VERSION LED DISPLAY OFF LED DISPLAY ON DISPLAY INVERSION NORMAL SLAVE MODE BLACKOUT MODE SOUND MODE TEST SOUND SENSE RESET NORMAL PAN INVERSION NORMAL TILT INVERSION TEMPERATURE 7 ...

[Page 9] ACME LED-MS150

DMX 512 ADDRESS To select the , press the ENTER button to show the DMX ADDRESS on the display. Use the DOWN/UP button to adjust the address from 1 to 512. Once the address has been selected, press the ENTER button to setup, to go back to th...

[Page 10] ACME LED-MS150

DIMMER MODE To select , press the ENTER button to show DIMMER MODE on the display. Use the DOWN/UP buttons to select the (Dimmer 1), (Dimmer2), (Dimmer 3) or (Dimmer 4) mode. Once the show has been selected, press the ENTER button...

[Page 11] ACME LED-MS150

BLACKOUT MODE To select the , press the ENTER button to show the BALCKOUT MODE on the display. Use the DOWN/UP button to select the (normal) or (blackout) mode. Once the mode has been selected, press the ENTER button to setup, to go...

[Page 12] ACME LED-MS150

TILT INVERSION To select the , press the ENTER button to show the TILT INVERSIO on the display. Use the DOWN/UP button to select the (normal) or (tilt inversion) mode. Once the mode has been selected, press the ENTER button to setup, ...

[Page 13] ACME LED-MS150

changes press the MENU button again. Hold and press the MENU button for one second or wait for one minute to exit the menu mode. RESET To select the , press the ENTER button to show the RESET on the display. Press the ENTER button and ...

[Page 14] ACME LED-MS150

Press the MENU button to exit. — Color home position adjustment To select the , press the ENTER button to show the COLOR OFFSET on the display. Use the DOWN and UP button to adjust the value from -127 to 127, press the ENTER button to s...

[Page 15] ACME LED-MS150

In slave mode, means the unit works normally and means 2-light show. In order to create a great light show, you can set on the second unit to get contrast movement to each other, even if you have two units only. 4.2 Easy Controller ...

[Page 16] ACME LED-MS150

5. DMX512 Configuration 8 Channels Mode: CHANNEL VALUE FUNCTION 1 000-255 PAN: 0 - 540° 2 000-255 TILT: 0 - 270° 3 STROBE: 000-007 Black out 008-015 Open 016-131 Strobe, Slow to Fast 132-139...

[Page 17] ACME LED-MS150

128-189 Clockwise Color Scroll, Fast to Slow 190-193 Stop 194-255 Counter Clockwise Color Scroll, Slow to Fast 5 GOBO: 000-009 White 010-018 Gobo1 019-027 Gobo2 028-036 Gobo3 037-045 Gobo4 0...

[Page 18] ACME LED-MS150

250-255 Sound Active 10 Channels Mode: CHANNEL VALUE FUNCTION 1 000-255 PAN: 0 ° - 540° 2 000-255 PAN FINE 3 000-255 TILT: 0 - 270° 4 000-255 TILT FINE 5 STROBE: 000-007 Black out 008...

[Page 19] ACME LED-MS150

7 000-009 White 010-018 Gobo1 019-027 Gobo2 028-036 Gobo3 037-045 Gobo4 046-054 Gobo5 055-063 Gobo6 064-073 White shaking 074-082 Gobo1 shaking 083-091 Gobo2 shaking 092-100 Gobo3 shakin...

[Page 20] ACME LED-MS150

6. DMX Connection Unit 1 Unit 2 Unit 3 Unit 4 1. At last unit, the DMX cable has to be terminated with a terminator. Solder a 120 ohm 1/4W resistor between pin 2(DMX-) and pin 3(D...

[Page 21] ACME LED-MS150

6. 3 pin XLR connectors are more popular than 5 pin XLR. 3 pin XLR: Pin 1: GND, Pin 2: Negative signal (-), Pin 3: Positive signal (+) 5 pin XLR: Pin 1: GND, Pin 2: Negative signal (-), Pin 3: Positive signal (+) Pin 4/5: Not us...

[Page 22] ACME LED-MS150

2. Check microphone to see if it is good by tapping the microphone E. One of the channels is not working well 1. The stepper motor might be damaged or the cable connected to the PCB is broken. 2. The motor’s drive IC on the PCB might be ou...

[Page 23] ACME LED-MS150

Declaration of Conformity We declare that our products (lighting equipments) comply with the following specification and bears CE mark in accordance with the provision of the Electromagnetic Compatibility (EMC) Directive 89...

[Page 24] ACME LED-MS150

Innovation, Quality, Performance 23 ...