Animo OptiBean Touch Service Book

[Page 1] Animo OptiBean Touch

Your perfect espresso is just one touch away servicebook OptiBean OptiBeanXL Model 2017 TOUCH ...

[Page 2] Animo OptiBean Touch

2 OptiBean (XL) Touch 2018/02 Rev. 0.4 TABLE OF CONTENTS FOREWORD 5 1. INTRODUCTION OPTIBEAN TOUCH ................................................................................. 6 1.1 Principles of operation ......................................

[Page 3] Animo OptiBean Touch

3 2018/02 Rev. 0.4 EN OptiBean (XL) Touch 4. MENU STRUCTURE / DISPLAY ........................................................................................ 50 4.1 The main menu .....................................................................

[Page 4] Animo OptiBean Touch

4 OptiBean (XL) Touch 2018/02 Rev. 0.4 12.1.6 Other currencies (no euros) ......................................................................... 121 12.1.7 Accepting tokens only (no euros) .........................................................

[Page 5] Animo OptiBean Touch

5 2018/02 Rev. 0.4 EN OptiBean (XL) Touch © 2018 Animo® All rights reserved. Nopartofthisdocumentmaybereproducedand/ormadepublicinprint,microlm,electronicmedia or any other form without the manuf...

[Page 6] Animo OptiBean Touch

6 OptiBean (XL) Touch 2018/02 Rev. 0.4 1. INTRODUCTION OPTIBEAN TOUCH Explanation of OptiBean Touch type designation: Designation Meaning Description Cup volume Dispensing height of cup Thermos jug 1st digit Number of canisters 1 - 3 - Standard ...

[Page 7] Animo OptiBean Touch

7 2018/02 Rev. 0.4 EN OptiBean (XL) Touch 1.1 Principles of operation DV 1 DV 2 Mixer 2 Cacao Topping Coee OptiBean 3 (XL) Touch DV 4 KW 3 Brewer Unit1 Unit 2 Hot water Cold water DV 1 DV 2 Mixer 2 Coee OptiBean 2 (XL) Touch DV 4 KW 3 Brewer...

[Page 8] Animo OptiBean Touch

8 OptiBean (XL) Touch 2018/02 Rev. 0.4 1.2 Model code TheOptiBeanTouchmodelsareconguredaccordingtothestandardcanistercongurationsshown below. OptiBean (XL) Model code Canister congurations Std. XL 1 ...

[Page 9] Animo OptiBean Touch

9 2018/02 Rev. 0.4 EN OptiBean (XL) Touch 2. FIRST MENU SETTINGS AFTER INSTALLATION Thefollowingdatamustbesetintheoperatorandservicemenusimmediatelyaftertherstuseofthe machine. The factor...

[Page 10] Animo OptiBean Touch

10 OptiBean (XL) Touch 2018/02 Rev. 0.4 Operator menu (page 52) • 1.01 Clock Time (set) Date (set) • 1.02 Switching times (set) The energy safe mode of the machine is activated by default. If this mode is not required, it can be deact...

[Page 11] Animo OptiBean Touch

11 2018/02 Rev. 0.4 EN OptiBean (XL) Touch • 2.04 Settings Language (set) • 2.06 Service boiler Service moment Cups (set) Months (set) Cups The message indicates that the device must be descaled. If a water lteris�...

[Page 12] Animo OptiBean Touch

12 OptiBean (XL) Touch 2018/02 Rev. 0.4 • Select CLEANING to run the cleaning program (without a cleaning tablet) and to reset the cleaning message. CLEANING ANIMO 10:10 MAKE YOUR CHOICE COFFEE 2X COFFEE ESPRESSO LATTE MACCHIATO COFFEE CHOC CA...

[Page 13] Animo OptiBean Touch

13 2018/02 Rev. 0.4 EN OptiBean (XL) Touch 2.1 User interface during free vend The user interface helps the user to select a drink (recipe) and informs them about the status of the process. Some of the items below are deactivated by default. The ...

[Page 14] Animo OptiBean Touch

14 OptiBean (XL) Touch 2018/02 Rev. 0.4 2.2 User interface when the payment system is connected The user interface below shows how the user is informed when the device is switched into the pay- ment mode. Some of the items below are deactivated by...

[Page 15] Animo OptiBean Touch

15 2018/02 Rev. 0.4 EN OptiBean (XL) Touch 2.4 How to program a recipe? Every machine contains preprogrammed basic recipes. Each key can be changed if required. In the example shown below button 1 is changed from coffee to cappuccino. 1. Navig...

[Page 16] Animo OptiBean Touch

16 OptiBean (XL) Touch 2018/02 Rev. 0.4 2.5 How do you correct a recipe? An easy way to check the volume and taste of the dispensed drink without leaving the menu: 1. Navigate to the service menu item shown above. 2. Change one or more settings...

[Page 17] Animo OptiBean Touch

17 2018/02 Rev. 0.4 EN OptiBean (XL) Touch 2.6 How do you measure the weight of an ingredient? Only the grinder or the ingredient motor will be driven (no water is dispensed). It is strongly recommended to check the coffee measurement using a...

[Page 18] Animo OptiBean Touch

18 OptiBean (XL) Touch 2018/02 Rev. 0.4 2.7 Adjustment rules 2.7.1 Espresso group TheOptiBeancanbeconguredtothefollowing espresso groups: Standard espresso group • A good cup of coffee (lungo) can be made with 7.5 - ...

[Page 19] Animo OptiBean Touch

19 2018/02 Rev. 0.4 EN OptiBean (XL) Touch 2.7.2 Coffee waste (puck) • It is very important how the compressed puck looks like when it is thrown out of the brewer. • A puck that is too wet and falling apart is a sign that too little coffee...

[Page 20] Animo OptiBean Touch

20 OptiBean (XL) Touch 2018/02 Rev. 0.4 2.8 How to adjust a coffee? After installation, the machine must always be adjusted for the coffee beans to be used. Use this chapter to help you do this. Once the coffee-making process has been set, the ...

[Page 21] Animo OptiBean Touch

21 2018/02 Rev. 0.4 EN OptiBean (XL) Touch Cappuccino and Latte Macchiato Milk-based drinks are drinks such as Coffee Latte, Cappuccino and Latte Macchiato. If the prefect setting for the espresso has been found, just copy this setting to all esp...

[Page 22] Animo OptiBean Touch

22 OptiBean (XL) Touch 2018/02 Rev. 0.4 2.9 Adjustment tips Cream layer too low Cream layer perfect Cream layer missing or too light - Thegrindistoone - Bitter taste - The preparation time is too long - Ground coffee dosing ...

[Page 23] Animo OptiBean Touch

23 2018/02 Rev. 0.4 EN OptiBean (XL) Touch 2.10 Advanced recipe settings Beforechangingtheadvancedrecipesettings(servicemenu2.03),youmustrstknowhowthe various parts such as valves, coffee grinder, in...

[Page 24] Animo OptiBean Touch

24 OptiBean (XL) Touch 2018/02 Rev. 0.4 3. PRINCIPLES OF OPERATION 3 1 4 5 2 6 7 8 9 16 10 17 11 19 18 15 12 13 14 20 21 22 Item Description Item Description 1. Coffee waste bin 12. KW2 Pump 10 bar 2. Drainage reservoir 13. KW1 Inlet valve 3. BM1 ...

[Page 25] Animo OptiBean Touch

25 2018/02 Rev. 0.4 EN OptiBean (XL) Touch 3.1 Water management Water supply Main tap Calcium & carbon cartrige De-scaler inlet for boiler Drain boiler & manometer Drip tray drainage. 3/8 “ KW1 PR KW2 NRV Flowmeter Pump WF NTC sensor B...

[Page 26] Animo OptiBean Touch

26 OptiBean (XL) Touch 2018/02 Rev. 0.4 3.1.1 Commissioning Switch on the machine using the ON/OFF switch. The display illuminates with the text ‘Position the driptrayandpressstart’.Theinletvalve[KW1]opensandt...

[Page 27] Animo OptiBean Touch

27 2018/02 Rev. 0.4 EN OptiBean (XL) Touch 3.1.4 Coffee preparation When a coffee is chosen, the coffee grinder measures approximately 7.5 g of coffee (9.5 g for OptiBean XL) into the espresso group, which then turns to the set position (brew). T...

[Page 28] Animo OptiBean Touch

28 OptiBean (XL) Touch 2018/02 Rev. 0.4 3.2 Components Component Image Inlet valve KW1 [1001161] Opens and closes the water supply, 24 Vdc coil closure. Pressure reducer DR [1000702] Reduces the water supply pressure to 2 bar. The water pressure i...

[Page 29] Animo OptiBean Touch

29 2018/02 Rev. 0.4 EN OptiBean (XL) Touch Component Image Expansion water valve DV6 [1000699] Pressure relief valve 4 bar [1007140] This valve is switched as an NO (normally open) valve. When the coil is not energised, the supply to the 4-bar pre...

[Page 30] Animo OptiBean Touch

30 OptiBean (XL) Touch 2018/02 Rev. 0.4 Component Image Espresso group (reversed) [1004572] Espresso group XL (reversed) [1004798] Thebrewerislledwithgroundcoffeefromthecoffeegrinder. Then the coffee is compacted, t...

[Page 31] Animo OptiBean Touch

31 2018/02 Rev. 0.4 EN OptiBean (XL) Touch Component Image Door switches There are two door switches on the inside of the right-side panel. Switch A is activated when the door is closed and switches off the machine when the door is opened. Switch...

[Page 32] Animo OptiBean Touch

32 OptiBean (XL) Touch 2018/02 Rev. 0.4 3.3 Cup detection (optional) The sensors detect the presence of a cup below the coffee outlet of the beverage dispenser. Coffee is only prepared when a cup has been placed. Also, the outlet for hot water is...

[Page 33] Animo OptiBean Touch

33 2018/02 Rev. 0.4 EN OptiBean (XL) Touch 3.4 Espresso group (reversed) The espresso group consists of a drive unit [4] and an espresso unit [3]. The 230-Vac motor in the drive unit drives the espresso unit. The upper [3.4] and lower pistons [3.6...

[Page 34] Animo OptiBean Touch

34 OptiBean (XL) Touch 2018/02 Rev. 0.4 3.4.1 Operation The ground coffee is measured into the espresso group and then the group closes. Hot water is forced at high pressure through the layer of coffee. The complete espresso cycle is described an...

[Page 35] Animo OptiBean Touch

35 2018/02 Rev. 0.4 EN OptiBean (XL) Touch 3.4.2 Espresso brewer specications Standard brewer XL Brewer Ø 37mm Ø 44mm min. 0,23 - max. 0,35* Ounces min. 0,34 - max 0,47* Ounces min. 50 - max. 150 ml min. 150 - max. 230 ml * max. 9,0 g...

[Page 36] Animo OptiBean Touch

36 OptiBean (XL) Touch 2018/02 Rev. 0.4 3.4.3 Dismantling Espresso group The espresso group can be disconnected from the drive unit as follows: 1. Switch off the machine. 2. Remove both hoses [1] from the espresso group. To remove the Teflon ...

[Page 37] Animo OptiBean Touch

37 2018/02 Rev. 0.4 EN OptiBean (XL) Touch 2. Remove the screws [3] around the motor housing [4]. 3. Carefully take the motor house [4] out of the machine. 4. Disconnect the connectors from the drive unit. 3.4.4 Replace Turn the drive shaft [A...

[Page 38] Animo OptiBean Touch

38 OptiBean (XL) Touch 2018/02 Rev. 0.4 3.5 Grinder The grinder is driven by a powerful DC motor [2.6]. Theuppergrindingdisk[2.2]isxed.Thelowergrindingdisk[2.3]isdrivenbyadrivebelt[2.4].T...

[Page 39] Animo OptiBean Touch

39 2018/02 Rev. 0.4 EN OptiBean (XL) Touch 3.5.1 Basic adjustment The coffee grinder is factory set for an average grinding neness. WARNING • Keep your fingers away from the grinding mechanism when the machine is in operation. WARNI...

[Page 40] Animo OptiBean Touch

40 OptiBean (XL) Touch 2018/02 Rev. 0.4 3.5.2 Service life The service life of the ceramic grinding disks is approximately 3 times longer than that of the steel grinding discs. The service life depends on the type of coffee beans* and is approxim...

[Page 41] Animo OptiBean Touch

41 2018/02 Rev. 0.4 EN OptiBean (XL) Touch 3.5.5 Replacement of the drive belt Coffee grinder housing disassembly 1. Remove the bean canister and the instant canister [1] and remove the cover plate [2] behind it. 2. Disconnect the electrical c...

[Page 42] Animo OptiBean Touch

42 OptiBean (XL) Touch 2018/02 Rev. 0.4 3.5.6 Cleaning Dependingonthenenessofthegrindandtheintensity of use, coffee residue piles up in the grinder housing andonthegrindingdiscs(neparticles,�...

[Page 43] Animo OptiBean Touch

43 2018/02 Rev. 0.4 EN OptiBean (XL) Touch 3.6 Instant group The instant product (ingredient) is pushed out of the canister [ 1 ] by a worm screw and falls via the dispensing nozzle into the mixer unit [ 3.4 ]. At the same time, hot water is disp...

[Page 44] Animo OptiBean Touch

44 OptiBean (XL) Touch 2018/02 Rev. 0.4 3.6.1 Adjustable mixer speed The mixer speed is adjustable from 20 to 100%. During the running time, two speeds can be set: Speed 1 and Speed 2. It is possible to adjust the percentage of Time speed 1. Sp...

[Page 45] Animo OptiBean Touch

45 2018/02 Rev. 0.4 EN OptiBean (XL) Touch 3.6.2 Ventilation mixer group The fan on the back of the machine ventilates the mixer group. The fan is easy to remove by turning the screw underneath. The fan speed can be adjusted in the service menu...

[Page 46] Animo OptiBean Touch

46 OptiBean (XL) Touch 2018/02 Rev. 0.4 3.7 Boiler system Turn on the device using the ON/OFF switch. The display will light up. If the boiler [1] is empty (at the rstinstallationorafterrunningtheshutdownmenu),the...

[Page 47] Animo OptiBean Touch

47 2018/02 Rev. 0.4 EN OptiBean (XL) Touch Dry boil protection This double pole dry boil protection [1.4] protects the heating element [1.3] against dry boiling. When the switchdetectsatemperatureabove135°C,both contacts...

[Page 48] Animo OptiBean Touch

48 OptiBean (XL) Touch 2018/02 Rev. 0.4 3.7.1 Dispensing valves The dispensing valves [2] used in the OptiBean are all the same and are called 3-way valves. The brewer valve DV1, mixer valve DV2 and hot water valve DV4 are used as NC (normally cl...

[Page 49] Animo OptiBean Touch

49 2018/02 Rev. 0.4 EN OptiBean (XL) Touch 3.7.2 Removing/replacing valves WARNING • Pressurised hot water! Do not remove components like valves, couplings, plugs and hoses before you depressurise the boiler system. Most valves (DV2, DV4, D...

[Page 50] Animo OptiBean Touch

50 OptiBean (XL) Touch 2018/02 Rev. 0.4 4. MENU STRUCTURE / DISPLAY 4.1 The main menu The main menu can be activated: - By pressing the text ‘MAKE YOUR CHOICE’ for 2 seconds. - By opening the door and pressing on the text ‘DOOR OPEN’. DO...

[Page 51] Animo OptiBean Touch

51 2018/02 Rev. 0.4 EN OptiBean (XL) Touch 4. MENU STRUCTURE / DISPLAY 4.1 The main menu The main menu can be activated: - By pressing the text ‘MAKE YOUR CHOICE’ for 2 seconds. - By opening the door and pressing on the text ‘DOOR OPEN’. ...

[Page 52] Animo OptiBean Touch

52 OptiBean (XL) Touch 2018/02 Rev. 0.4 4.2 The operator menu Operator menu Main item Subitem .. Range Default setting Description 1.00 FREE VEND FREE VEND YES/NO YES Set the machine for free or paid vending. To disable this item go to the servic...

[Page 53] Animo OptiBean Touch

53 2018/02 Rev. 0.4 EN OptiBean (XL) Touch Operator menu Main item Subitem .. Range Default setting Description 1.02 SWITCHING TIMES ENERGY SAFE MODE ACTIVE YES/NO YES Active: After the set time has passed, the machine goes into power save mod...

[Page 54] Animo OptiBean Touch

54 OptiBean (XL) Touch 2018/02 Rev. 0.4 Example: Three set prices for beverages MONDAY-FRIDAY. Price selection Price high: € 1,00 Price selection Free Price selection Price low: € 0,50 Price selection Price high: € 1,00 1 2 9.00 11.00 18.00 2...

[Page 55] Animo OptiBean Touch

55 2018/02 Rev. 0.4 EN OptiBean (XL) Touch Operator menu Main item Subitem Range Default setting Description 1.03 RECIPE COUNTERS 1 RECIPE 2 RECIPE 3 RECIPE 4 RECIPE ETC. TOTAL cups Total count per recipe (from free till jugs) Number of drinks fr...

[Page 56] Animo OptiBean Touch

56 OptiBean (XL) Touch 2018/02 Rev. 0.4 Operator menu Main item Subitem Range Default setting Description 1.06 SOFTWARE / HARDWARE SOFTWARE OK BOOTLADER: V6.0.2253 MAINBOARD: V6.0.2522 ANDROID APP: 0.1.2528 ANDROID BUILD: var_mx6-eng 5.0.2 1....

[Page 57] Animo OptiBean Touch

57 2018/02 Rev. 0.4 EN OptiBean (XL) Touch Operator menu Main item Subitem .. . Range Default setting Description 1.11 VISUAL & SOUND ADVERTISING SCREEN CHOOSE ADVERTISING SCREEN ANNULEREN OK  >GEEN<  AFBEELDING  VIDEO  ...

[Page 58] Animo OptiBean Touch

58 OptiBean (XL) Touch 2018/02 Rev. 0.4 Operator menu Main item Subitem .. Range Default setting Description 1.11 VISUAL & SOUND SOUNDS VIDEO SOUND 0 - 100 70 Set the video sound volume. SYSTEM SOUND 0 - 100 70 Set the system sound volume. ...

[Page 59] Animo OptiBean Touch

59 2018/02 Rev. 0.4 EN OptiBean (XL) Touch Pin Code Table No. Operator Pin code No. Operator Pin code No. Operator Pin code 1 4 2 1 2 2 8 3 4 3 1 4 15 3 4 3 1 2 2 3 3 4 4 3 9 4 2 1 3 4 16 3 4 4 2 4 3 1 4 1 1 3 10 3 3 3 1 4 17 1 4 2 2 4 4 2 4 2 1 2...

[Page 60] Animo OptiBean Touch

60 OptiBean (XL) Touch 2018/02 Rev. 0.4 Service menu Main item Subitem Item Range Default setting Description 2.02 RECIPE BUTTON SETTINGS 1 RECIPE 2 RECIPE 3 RECIPE 4 RECIPE ETC. SET RECIPE FUNCTION 0-1-2-3 Set the required operation of the key ...

[Page 61] Animo OptiBean Touch

61 2018/02 Rev. 0.4 EN OptiBean (XL) Touch 2.02 RECIPE BUTTON SETTINGS / 2.02.00.05 SET RECIPE FUNCTION SETTING DRINK PIN CODE NEEDED NO PAYMENT SYS- TEM CONNECTED PAYMENT SYSTEM ACTIVE 0 JUG COFFEE KAN KOFFIE KANNE KAFFEE PICHET DE CAFÉ PIN-COD...

[Page 62] Animo OptiBean Touch

62 OptiBean (XL) Touch 2018/02 Rev. 0.4 Service menu Main item Subitem Range Default setting Description 2.03 RECIPE SETTINGS 1 RECIPE 2 RECIPE 3 RECIPE 4 RECIPE ETC. UNIT 1 BREWER VALVE 1 DELAY TIME (DV1) 0.0-30.0 s Brewer valve 1 delay time BR...

[Page 63] Animo OptiBean Touch

63 2018/02 Rev. 0.4 EN OptiBean (XL) Touch Service menu Main item Subitem Range Description 2.03 RECIPE SETTINGS 1 RECIPE 2 RECIPE 3 RECIPE 4 RECIPE ETC. UNIT 2 MIXER 2 VALVE DELAY TIME (DV2) 0.0-30.0 s Mixer valve (DV2) delay time MIXER 3 VALVE ...

[Page 64] Animo OptiBean Touch

64 OptiBean (XL) Touch 2018/02 Rev. 0.4 Service menu Main item Subitem Range Description 2.03 RECIPE SETTINGS 1 RECIPE 2 RECIPE 3 RECIPE 4 RECIPE ETC. INGREDIENT RANGE SETTING COFFEE STRENGTH 0-10% With the strength range item, an ingredient c...

[Page 65] Animo OptiBean Touch

65 2018/02 Rev. 0.4 EN OptiBean (XL) Touch Service menu Main item Subitem Range Default setting Description 2.04 SETTINGS LANGUAGE ANNULEREN OK  NEDERLANDS  ENGLISH  DEUTSCH  FRANÇAIS  ......  ......  ......  ...... 2.04...

[Page 66] Animo OptiBean Touch

66 OptiBean (XL) Touch 2018/02 Rev. 0.4 Service menu Main item Subitem Range Default setting Description 2.04 SETTINGS COIN SYSTEM COIN VALIDATOR (G13) COIN CHANNEL 1 € 0.05 Coin value per channel setting. € 0.05 to € 2.00. 0.00 = free...

[Page 67] Animo OptiBean Touch

67 2018/02 Rev. 0.4 EN OptiBean (XL) Touch Service menu Main item Subitem Range Default setting Description 2.04 SETTINGS COIN SYSTEM COIN VALIDATOR (G13) CURRENCY SYMBOL SHOW SYMBOL YES/NO NO Show valuta symbol SELECT SYMBOL ANNULEREN OK 2...

[Page 68] Animo OptiBean Touch

68 OptiBean (XL) Touch 2018/02 Rev. 0.4 Service menu Main item Subitem Range Default setting Description 2.04 SETTINGS COIN SYSTEM MDB CURRENCY SYMBOL SHOW SYMBOL YES/NO NO SELECT SYMBOL ANNULEREN OK 2.04.05.00.10.01 KEUZE SYMBOOL CANCEL ...

[Page 69] Animo OptiBean Touch

69 2018/02 Rev. 0.4 EN OptiBean (XL) Touch Service menu Main item Subitem Range Default setting Description 2.04 SETTINGS DEMO MODUS YES/NO YES This function can be used when the machine is in a showroom or at a trade fair. The machine does n...

[Page 70] Animo OptiBean Touch

70 OptiBean (XL) Touch 2018/02 Rev. 0.4 Service menu Main item Subitem Range Default setting Description 2.05 RESET COUNTERS SERVICE COUNTERS RINSE COUNTER? Reset the rinse counter. CLEAN COUNTER? Reset the cleaning counter. RECIPE COUNTERS R...

[Page 71] Animo OptiBean Touch

71 2018/02 Rev. 0.4 EN OptiBean (XL) Touch Service menu Main item Subitem Sub Range Description 2.07 HARDWARE TEST INPUTS TEMPERATURE Boilertemp°C Shows the status of the sensors/ switches concerned. DRIP TRAY SENSOR YES/NO WASTE BIN YES/NO ...

[Page 72] Animo OptiBean Touch

72 OptiBean (XL) Touch 2018/02 Rev. 0.4 Service menu Main item Subitem Description 2.7 HARDWARE TEST CALIBRATION FLOW METER 1,850 p/ml (1,700-2,000) Ifnecessary,theowmetercanbe calibrated. The calibration is not described...

[Page 73] Animo OptiBean Touch

73 2018/02 Rev. 0.4 EN OptiBean (XL) Touch Service menu Main item Subitem Description 2.08 READ LOG FILE ERROR LOG Last 20 error messages including time and date will be saved. CLEANING LOG Last 31 cleaning actions including time and date will be s...

[Page 74] Animo OptiBean Touch

74 OptiBean (XL) Touch 2018/02 Rev. 0.4 Service menu Main item Subitem Item Description 2.11 SD / USB - MENU LOAD DATA / SOFTWARE UPDATE Memory Card Memory Card PERSONAL SETTINGS With this menu item, personal settings can be loaded into the m...

[Page 75] Animo OptiBean Touch

75 2018/02 Rev. 0.4 EN OptiBean (XL) Touch Service menu Main item Subitem Item Description 2.11 SD / USB - MENU SAVE DATA Memory Card Memory Card PERSONAL SETTINGS With this menu item, personal settings can be saved on an SD/ USB memory and/or c...

[Page 76] Animo OptiBean Touch

76 OptiBean (XL) Touch 2018/02 Rev. 0.4 Service menu Main item Subitem Range Default setting Description 2.12 CHANGE SERVICE PIN CODE NEW PIN CODE REPEAT PIN CODE With this menu item, the PIN code can be changed. The complete service menu is se...

[Page 77] Animo OptiBean Touch

77 2018/02 Rev. 0.4 EN OptiBean (XL) Touch Service menu Main item Subitem Range Default setting Description 2.14 INSTALLATION COMMISSIONING When a new machine is switched on, the commissioning menu starts automatically. Follow the instructions on...

[Page 78] Animo OptiBean Touch

78 OptiBean (XL) Touch 2018/02 Rev. 0.4 5. SETTINGS AND SOFTWARE This chapter [5.1 & 5.2] informs you about how to work withlesthatcanbecreatedbythemachine.Inthese les,variousmachinesettingsa...

[Page 79] Animo OptiBean Touch

79 2018/02 Rev. 0.4 EN OptiBean (XL) Touch Reading your saved les on a computer Thefollowinglescansimplybeopenedandreadonacomputer. WARNING • Never change the content in a file; this may not be changed a...

[Page 80] Animo OptiBean Touch

80 OptiBean (XL) Touch 2018/02 Rev. 0.4 5.1 Save settings Afterinstallingandsettingup(netuning)amachine,it is possible to copy the most important settings to other machines with thesamecanistercongurat...

[Page 81] Animo OptiBean Touch

81 2018/02 Rev. 0.4 EN OptiBean (XL) Touch 5.2 Load settings When loading previously saved settings into another machine withthesamecanisterconguration. If the display shows RDU MDU NOT AVAILABLE, there arenosuitablele...

[Page 82] Animo OptiBean Touch

82 OptiBean (XL) Touch 2018/02 Rev. 0.4 5.3 Software installation New software can easily be installed on the machine. New software is available in the following ways: • www.animo.eu/en/sd (no log in needed) • www.animo.eu / dealer login: E...

[Page 83] Animo OptiBean Touch

83 2018/02 Rev. 0.4 EN OptiBean (XL) Touch 6. Press OKifyouwanttosavetheexistinglesfromthemachine(preferred). Press SKIP if you do not want to save the existing les from the machine. The personal fil...

[Page 84] Animo OptiBean Touch

84 OptiBean (XL) Touch 2018/02 Rev. 0.4 8. Press INSTALL to continue the software update. The application (APP) is being updated to the PC board behind the display. Animo Do you want to install an update to this existing application? Your exis...

[Page 85] Animo OptiBean Touch

85 2018/02 Rev. 0.4 EN OptiBean (XL) Touch 10. Select the OptiBean Touch model of your choice. To select the right model please go to chapter 1.2 Model code. OptiBean 2 Touch = model 3B2A OptiBean 3 Touch = model 3B3A OptiBean 2 XL Touch = mode...

[Page 86] Animo OptiBean Touch

86 OptiBean (XL) Touch 2018/02 Rev. 0.4 12. Load the personal settings and the recipe settings, of which you made a back-up on the SD/USB memory before the software update was started, back into the machine. Navigate to the automatic software upda...

[Page 87] Animo OptiBean Touch

87 2018/02 Rev. 0.4 EN OptiBean (XL) Touch 6. MAINTENANCE 6.1 Daily rinsing program After 1 day, the display shows RINSE. This message will disappear after running the rinsing program. RINSING WIENER MELANGE CHOCOLATE MILK CLEANING WIENER MELA...

[Page 88] Animo OptiBean Touch

88 OptiBean (XL) Touch 2018/02 Rev. 0.4 6.2 Weekly cleaning program After 7 days, the display shows CLEANING. This message will disappear after running the cleaning program. RINSING WIENER MELANGE CHOCOLATE MILK CLEANING WIENER MELANGE CHOCOLA...

[Page 89] Animo OptiBean Touch

89 2018/02 Rev. 0.4 EN OptiBean (XL) Touch 6.3 Periodic maintenance 6.3.1 Service boiler During installation of the machine, the boilers service moment has been set. See service menu item 2.06 Service boiler / 2.06.1 Service moment During use, ...

[Page 90] Animo OptiBean Touch

90 OptiBean (XL) Touch 2018/02 Rev. 0.4 6.3.2 Service brewer The service moment for the brewer is factory set. See service menu item 2.13 Other Settings / 2.13.2 Service brewer During use, the brewer movements are counted. When the service mom...

[Page 91] Animo OptiBean Touch

91 2018/02 Rev. 0.4 EN OptiBean (XL) Touch 6.4 Service contracts Preface Preventive maintenance will extend the service life of the machine and reduce the chance of malfunctions. Read the (safety) instructions carefully in the user manual, servic...

[Page 92] Animo OptiBean Touch

92 OptiBean (XL) Touch 2018/02 Rev. 0.4 Activities Time Consumables Art.no. OptiBean Boiler 2-2 10 min Change lter cartridge - Incaseawaterlterisinstalled,replacethe cartridge for a new one. - Reset the 2.6 Serv...

[Page 93] Animo OptiBean Touch

93 2018/02 Rev. 0.4 EN OptiBean (XL) Touch Activities Time Consumables Art.no. OptiBean Replace the shaft seal and the O-ring in the green mixer mounting ring. Lubricate the inside shaft seal with food grade grease. 1000742 1x 1x 1003572 1x 1x Lu...

[Page 94] Animo OptiBean Touch

94 OptiBean (XL) Touch 2018/02 Rev. 0.4 Activities Time Consumables Art.no. OptiBean Dispensing valves (2 Yearly) 20 min. Dispensing valves 1000699 4x 4x Safety valves (2 Yearly) 10 min. Overpressure valves 3 bar 1000734 1x 1x Overpressure valves 1...

[Page 95] Animo OptiBean Touch

95 2018/02 Rev. 0.4 EN OptiBean (XL) Touch WARNING • During maintenance activities, stay with the machine. • When descaling, always follow the instructions for the descaling agent used. • It is advisable to wear safety glasses and protec...

[Page 96] Animo OptiBean Touch

96 OptiBean (XL) Touch 2018/02 Rev. 0.4 4. Remove the back panel and connect the suction tubetotheteeoftheowmeter(removeplug). CANCEL OK PLACE A EMPTY CONTAINER PRESS OK 2.15 DESCALING 2.15 DESCALING BOILE...

[Page 97] Animo OptiBean Touch

97 2018/02 Rev. 0.4 EN OptiBean (XL) Touch 7. After the soaking interval, the suction hose must be removedandtheplugmustberetted. CANCEL OK PLACE A EMPTY CONTAINER PRESS OK 2.15 DESCALING 2.15 DESCALING BOILER DEPR...

[Page 98] Animo OptiBean Touch

98 OptiBean (XL) Touch 2018/02 Rev. 0.4 6.5 Maintenance espresso group 6.5.1 Brewer r eplacement kit 25K • After 25,000 cycles, the filters and seals must be replaced. The display shows [ Service brewer ]. RINSING WIENER MELANGE CHOCOLATE MI...

[Page 99] Animo OptiBean Touch

99 2018/02 Rev. 0.4 EN OptiBean (XL) Touch 5. ToplaceanewO-ring[8],rstunscrewthebolt[5]. 6. Pull out the piston rod [6]. 7. Unscrewthetwoscrewswhichholdthelowerange[7]. 8. Place a n...

[Page 100] Animo OptiBean Touch

100 OptiBean (XL) Touch 2018/02 Rev. 0.4 6.6 Check/set the pump pressure WARNING • Pressurised hot water! Do not remove components like valves, couplings, plugs and hoses before depressurising the boiler system. 1. Activate the shut down m...