AOS D2367PH User Manual

[Page 1] AOS D2367PH

LCD Monitor User Manual D2367P /D2267 P W H / D2367P D2267P W / LED Backlight ...

[Page 2] AOS D2367PH

2 Safety ........................................................................................................................................................................ 3 National Conventions .........................................

[Page 3] AOS D2367PH

3 Safety National Conventions The following subsections describe notational conventions used in this document. Notes, Cautions, and Warnings Throughout this guide, blocks of text may be accompanied by an icon and printed in bold type o...

[Page 4] AOS D2367PH

4 Power The monitor should be operated only from the type of power source indicated on the label. If you are not sure of the type of power supplied to your home, consult your dealer or local power company. The monitor is equipped with...

[Page 5] AOS D2367PH

5 Installation Do not place the monitor on an unstable cart, stand, tripod, bracket, or table. If the monitor falls, it can injure a person and cause serious damage to this product. Use only a cart, stand, tripod, bracket, or table recommend...

[Page 6] AOS D2367PH

6 Cleaning Clean the cabinet regularly with cloth. You can use soft-detergent to wipe out the stain, instead of strong-detergent which will cauterize the product cabinet. When cleaning, make sure no detergent is leaked into the pro...

[Page 7] AOS D2367PH

7 Other If the product is emitting a strange smell, sound or smoke, disconnect the power plug IMMEDIATELY and contact a Service Center. Make sure that the ventilating openings are not blocked by a table or curtain. Do not engag...

[Page 8] AOS D2367PH

8 Setup Contents in Box check with the local dealer or AOC branch office for confirmation. Monitor CD Manual Base Adapter Power Cable Analog Cable HDMI Cable * * * Audio Cable 3D Glasses Not all signal cables (Analog, an...

[Page 9] AOS D2367PH

9 Setup Stand & Base Please setup or remove the base following the steps as below. Setup: Remove: 1 2 ...

[Page 10] AOS D2367PH

10 Unit standing without base is available. (Caution: must put unit in flat surface. Any uneven or sloped surface may result unit damaged or injury to user.) ...

[Page 11] AOS D2367PH

Adjusting Viewing Angle For optimal viewing it is recommended to look at the full face of the monitor, then adjust the monitor's angle to your own preference. Hold the stand so you will not topple the monitor when you change the monitor...

[Page 12] AOS D2367PH

12 Connecting the Monitor 1. Pow e r 2. 5. HDMI 3. To protect equipment, always turn off the PC and LCD monitor before connecting. 1 Connect the power cable to the AC port on the back of the monitor. 2 Connect o...

[Page 13] AOS D2367PH

Connecting the Monitor 1. Pow e r 2. DVI 3. To protect equipment, always turn off the PC and LCD monitor before connecting. 1 Connect the power cable to the AC port on the back of the monitor. 2 Connect one end of the 15-p...

[Page 14] AOS D2367PH

Adjusting Setting Optimal Resolution Windows Vista For Windows Vista: 1 Click START. 2 Click CONTROL PANEL. 3 Click Appearance and Personalization. 4 Click Personalization 1 4 ...

[Page 15] AOS D2367PH

5 Click Display Settings. 6 Set the resolution SLIDE-BAR to 1 . Optimal preset resolution 5 ...

[Page 16] AOS D2367PH

Windows XP For Windows XP: 1 Click START. 2 Click SETTINGS. 3 Click CONTROL PANEL. 4 Click Appearance and Themes. 5 Double click DISPLAY. 16 ...

[Page 17] AOS D2367PH

6 Click SETTINGS. 7 Set the resolution SLIDE-BAR to Windows ME/2000 For Windows ME/2000: 1 Click START. 2 Click SETTINGS. 3 Click CONTROL PANEL. 4 Double click DISPLAY. 5 Click SETTINGS. 6 Set the resolution SLIDE-B...

[Page 18] AOS D2367PH

Hotkeys 1 2 3 Menu/Enter 4 5 Power Press the Power button to turn on/off the monitor. When there is no OSD, press Volume adjust volume. Auto / Exit / Source hot key When there is no OSD, press Auto/Source but...

[Page 19] AOS D2367PH

OSD Setting Basic and simple instruction on the control keys. 1) Press the MENU-button to activate the OSD window. 2) Press or to navigate through the functions. Once the desired function is highlighted, press the MENU-button to act...

[Page 20] AOS D2367PH

Luminance 1. Press MENU (Menu) to display menu. 2. Press or to select (Luminance), and press MENU to enter. 3. Press or to select submenu, and press MENU to enter.   ∧ ∨ ∧ ∨ 20 ...

[Page 21] AOS D2367PH

4. Press or to adjust. 5. Press AUTO to exit. Brightness 0-100 Backlight Adjustment Contrast 0-100 Contrast from Digital-register. Eco mode Standard Standard Mode Text Text Mode Internet Internet M...

[Page 22] AOS D2367PH

Image Setup 1. Press MENU (Menu) to display menu. 2. Press or to select (Image Setup), and press MENU to enter. 3. Press or to select submenu, and press MENU to enter. 2   ∧ ∨ ∧ ∨ 2 ...

[Page 23] AOS D2367PH

4. Press or to adjust. 5. Press AUTO to exit. Clock 0-100 Adjust picture Clock to reduce Vertical-Line noise. Phase 0-100 Adjust Picture Phase to reduce Horizontal-Line noise Sharpness 0-100 Adjust picture sharpn...

[Page 24] AOS D2367PH

Color Setup 1. Press MENU (Menu) to display menu. 2. Press or to select (Color Setup), and press MENU to enter. 3. Press or to select submenu, and press MENU to enter. 2   ∧ ∨ ∧ ∨ 4 ...

[Page 25] AOS D2367PH

4. Press or to adjust. 5. Press AUTO to exit. Color setup. Warm Recall Warm Color Temperature from EEPROM. Normal Recall Normal Color Temperature from EEPROM. Cool Recall Cool Color Temperature from EEPROM. ...

[Page 26] AOS D2367PH

Picture Boost 1. Press MENU (Menu) to display menu. 2. Press or to select (Picture Boost), and press MENU to enter. 3. Press or to select submenu, and press MENU to enter. 2    ∧ ∨ ∧ ∨ 6 ...

[Page 27] AOS D2367PH

4. Press or to adjust. 5. Press AUTO to exit. Frame Size 14-100 Adjust Frame Size Brightness 0-100 Adjust Frame Brightness Contrast 0-100 Adjust Frame Contrast H. position 0-100 Adjust Frame horizon...

[Page 28] AOS D2367PH

OSD Setup 1. Press MENU (Menu) to display menu. 2. Press or to select (OSD Setup), and press MENU to enter. 3. Press or to select submenu, and press MENU to enter. 2    ∧ ∨ ∧ ∨ 8 ...

[Page 29] AOS D2367PH

4. Press or to adjust. 5. Press AUTO to exit. H.Position 0-100 Adjust the horizontal position of OSD V.Position 0-100 Adjust the vertical position of OSD Timeout 5-120 Adjust the OSD Timeout Transparence 0-100...

[Page 30] AOS D2367PH

Extra 1. Press MENU (Menu) to display menu. 2. Press or to select (Extra), and press MENU to enter. 3. Press or to select submenu, and press MENU to enter.   ∧ ∨ ∧ ∨ 30 ...

[Page 31] AOS D2367PH

4. Press or to adjust. 5. Press AUTO to exit. 31  ∧ ∨ Input Select Auto Select to Auto Detect input signal Select Signal Source as Input Select So urce as Input Auto Config yes or no Auto adjust t...

[Page 32] AOS D2367PH

1. menu. 2D, 2D-3D,3D (SBS), 3D(T/B) modes are available for switchover. HDMI input mode under 2D: Press the Menu key to enter the OSD menu and select the 2D/3D/ menu. Auto (2D), 2D-3D,3D (SBS) and 3 D (T/B) modes are available for switchov...

[Page 33] AOS D2367PH

. HDMI input mode un r 3D: Press the Menu key to enter the OSD menu and select the 2D/3D/ menu. . 4 HDMI input mode under 2D: Press the Menu key to enter the OSD menu and select the 2D/3D menu. When select 2D-3D mode, th...

[Page 34] AOS D2367PH

3 4 Exit 1. Press MENU (Menu) to display menu. 2. Press or to select (Exit), and press MENU to enter. 3. Press AUTO to exit. Exit Exit the main OSD ∧ ∨ ...

[Page 35] AOS D2367PH

3 5 LED Indicator Status LED Color Full Power Mode Blue Active-off Mode orange ...

[Page 36] AOS D2367PH

3 6 Driver Monitor Driver Windows 7 1.Start Windows® 7 2.Click on the 'Start' button and then click on 'Control Panel'. 3. Click on the 'Display' icon. ...

[Page 37] AOS D2367PH

3 7 4.Ckick on the “Change display settings” button. 5.Click the “Advanced Settings” button. 6. Click the “Monitor” tab and then click the “Properties” button. ...

[Page 38] AOS D2367PH

3 8 7.Click the “Driver” tab. 8. Open the "Update Driver Software-Generic PnP Monitor" window by clicking on “Update Driver... “and then click the "Browse my computer for driver software" button. 9. Selec...

[Page 39] AOS D2367PH

3 9 10. Click the “Have Disk” button. Click on the “Browse” button and navigate to the following directory: X:\Driver\module name (where X is the drive letter designator for the CD-ROM drive). 11. Select the "xxx.inf&qu...

[Page 40] AOS D2367PH

40 Windows Vista 1. Click "Start " and "Control Panel". Then, double-click on "Appearance and Personalization". 2. Click "Personalization" and then "Display Settings". 3. Cl...

[Page 41] AOS D2367PH

41 4. Click "Properties" in the "Monitor" tab. If the "Properties" button is deactivated, it means the configuration for your monitor is completed. The monitor can be used as is. If the message "Windows need...

[Page 42] AOS D2367PH

4 2 Windows XP 1. Start Windows® XP 2. Click on the 'Start' button and then click on 'Control Panel'. 3. Select and click on the category ‘Appearance and Themes’ 4. Click on the 'Display' Item...

[Page 43] AOS D2367PH

4 3 5. Select the 'Settings' tab then click on the 'Advanced' button. 6. Select ' Monitor' tab - If the 'Properties' button is inactive, it means your monitor is properly configured. Please stop in...

[Page 44] AOS D2367PH

44 8. Select the 'Install from a list or specific location [advanced]' radio button and then click on the 'Next' button. 9. Select t he 'Don't Search. I will choose the driver to install' radio button. Th...

[Page 45] AOS D2367PH

4 5 Windows 2000 1. Start Windows® 2000 2. Click on the 'Start' button, point to 'Settings', and then click on 'Control Panel'. 3. Double click on the 'Display' Icon. 4. Select the 'S...

[Page 46] AOS D2367PH

4 6 i-Menu Welcome to “i-Menu” software by AOC. i-Menu makes it easy to adjust your monitor display setting by using on screen menus instead of the OSD button on the monitor. To complete installation, please follow the installation guid...

[Page 47] AOS D2367PH

4 7 e-Saver Welcome to use AOC e-Saver monitor power management software! The AOC e-Saver features Smart Shutdown functions for your monitors, allows your monitor to timely shutdown when PC unit is at any status (On, Off, Sleep or Screen Sa...

[Page 48] AOS D2367PH

4 8 Screen+ Welcome to "Screen+" software by AOC, Screen+ software is a desktop screen splitting tool, it splits the desktop into different panes, each pane displays a different window. You only need to drag the window to a corre...

[Page 49] AOS D2367PH

4 9 Troubleshoot Problem & Question Possible Solutions Power LED Is Not ON Make sure the power button is ON and the Power Cord is properly connected to a grounded power outlet and to the monitor. No images on the screen Is the power...

[Page 50] AOS D2367PH

50 3D Troubleshooting for D2367P / H Ghost images that appear when viewing 3D effects may be a result of the following: 1. the display unit has not been adjusted to its optimum resolution of 1920* 1080 at 60HZ ; if a customer com...

[Page 51] AOS D2367PH

51 If the 3D effect fails, please check: 1. whether you are wearing the original 3D glasses supplied by the manufacturer and whether you are sitting within the effective viewing distance; 2. whether the 3D func tion of the ...

[Page 52] AOS D2367PH

5 50 4 Precautions when wearing 3D glasses: - Do not use 3D glasses as common glasses, sunglasses or protective goggles as they your eyesight; - Do not keep 3D glasses in places that are too hot or cold 3D glasses will be dama . Do not u...

[Page 53] AOS D2367PH

Specification Panel Model name D2367P H Driving system TFT Color LCD Viewable Image Size 584.2mm Diagonal Pixel pitch 0.0884*RGB( H )mm x 0.2652(V)mm Video R, G, B Analog lnterface ,HDMI Separate Sync. H/V TTL Display Col...

[Page 54] AOS D2367PH

54 51 Operating 0° to 40° Non-Operating -25°to 55° Humidity: Operating 10% to 85% (non-condensing) Non-Operating 5% to 93% (non-condensing) A ltitude: Operating 0~ 2000m (0~ 6562 ft ) Non-Operatin...

[Page 55] AOS D2367PH

55 52 Panel Model number D2267P WH Driving system TFT Color LCD Viewable Image Size 546.2 mm diagoanl Pixel pitch 0.08265*RGB (H)mm x 0.24795(V)mm Video R, G, B Analog lnterface,HDMI Separate Sync. H/V TTL Display Color ...

[Page 56] AOS D2367PH

Panel Model name D2367P Driving system TFT Color LCD Viewable Image Size 584.2mm Diagonal Pixel pitch 0.0884*RGB(H)mm x 0.2652(V)mm Video R, G, B Analog lnterface ,DVI Separate Sync. H/V TTL Display Color 16.7M Colors D...

[Page 57] AOS D2367PH

31 Non-Operating -25°to 55° Humidity: Operating 10% to 85% (non-condensing) Non-Operating 5% to 93% (non-condensing) A ltitude: Operating 0~ 5000m (0~ 16404 ft ) Non-Operating 0~ 12192m (0~ 40000 ft ) 57 ...

[Page 58] AOS D2367PH

Panel Model name Driving system TFT Color LCD Viewable Image Size 546.2mm Diagonal Pixel pitch 0.08265*RGB(H)mm x 0.24795 (V)mm Video R, G, B Analog lnterface ,DVI Separate Sync. H/V TTL Display Color 16.7M Colors Dot Cl...

[Page 59] AOS D2367PH

31 Operating 0° to 40° Non-Operating -25°to 55° Humidity: Operating 10% to 85% (non-condensing) Non-Operating 5% to 93% (non-condensing) A ltitude: Operating 0~ 5000m (0~ 16404 ft ) Non-Operating 0~ 12192m...

[Page 60] AOS D2367PH

Preset Display Modes STAND Resolution HORIZONTAL FREQUENCY(kHz) VERTICAL FREQUENCY(Hz) VGA 640x480@60Hz 31.469 59.940 640x480@72Hz 37.861 72.809 640x480@75Hz 37.500 75.00 SVGA 800x600@56Hz 35.156 56.250 800x600@60Hz 37.879 60.317 ...

[Page 61] AOS D2367PH

Pin Assignments Preset table for the HDMI 3D mode For HDMI INPUT, switch over to 1920*1080/24/25/30HZ if the font on the display unit screen is not clear. Pin Number 15-Pin Side of the Signal Cable 1 Video-Red 2 Video-Gree...

[Page 62] AOS D2367PH

10 Ground 11 N.C. 12 DDC-Serial data 13 H-sync 14 V-sync 15 DDC-Serial clock Pin No. Signal Name Pin No. Signal Name Pin No. Signal Name 1 TMDS Data 2+ 9 TMDS Data 0 17 DDC/CEC Ground 2 TMDS Data 2 Shield 10 TMDS Clock + ...

[Page 63] AOS D2367PH

31 Pin Number 24-Pin Color Display Signal Cable Pin Number 24-Pin Color Display Signal Cable 1 TMDS data 2－ 13 TMDS data 3＋ 2 TMDS data 2＋ 14 ＋5V Power 3 TMDS data 2/4 Shield 15 Ground (for+5V) 4 TMDS da...

[Page 64] AOS D2367PH

64 Regulation FCC Notice FCC Class B Radio Frequency Interference Statement NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are desi...

[Page 65] AOS D2367PH

65 WEEE Declaration Disposal of Waste Equipment by Users in Private Household in the European Union. This symbol on the product or on its packaging indicates that this product must not be disposed of with your other household waste.Inste...

[Page 66] AOS D2367PH

WEEE/E-Waste declaration for India This symbol on the product or on its packaging indicates that this product must not be disposed of with your other household waste.Instead, it is your responsibility to dispose of your waste equipment by ha...

[Page 67] AOS D2367PH

67 Service Warranty Statement for Europe LIMITED THREE-YEAR WARRANTY* AOC Color Monitors sold within Europe AOC International (Europe) BV warrants this product to be free from defects in material and workmanship for a period of Three (3)...

[Page 68] AOS D2367PH

6 8 modified or altered; you bear the sole responsibility and liability for any such modification or alteration. ALL EXPRESS AND IMPLIED W ARRANTIES FOR THIS PRODUCT (INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR P...

[Page 69] AOS D2367PH

69 Warranty Statement for North & South America (excluding Brazil) WARRANTY STATEMENT for AOC Color Monitors Including those Sold within North America as Specified Envision Peripherals, Inc. warrants this product to be free from def...

[Page 70] AOS D2367PH

ALL EXPRESS AND IMPLIED WARRANTIES FOR THIS PRODUCT (INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE) ARE LIMITED IN DURATION TO A PERIOD OF THREE (3) YEARS FOR PARTS AND LABOR AND ONE (1) YEAR FOR CRT TUBE OR...

[Page 71] AOS D2367PH

WARRANTY PERIOD COVERAGE AT NO CHARGE CUSTOMER CHARGES Within the first three months of purchase: Covered by EASE - ...

[Page 72] AOS D2367PH

TCO Certified Document for Displays version. 2.3 Congratulations! This product is designed for both you and the planet! TCO Development works for sustainable IT - manufacture, use and recycling of IT products reflecting environmental, soc...