Peavey XR-AT Operating Manual

[Page 1] Peavey XR-AT

www.peavey.com XR ® -AT Powered Mixer Operating Manual ...

[Page 2] Peavey XR-AT

 FCC/ICESCompliancyStatement ThisdevicecomplieswithPart15oftheFCCrulesandIndustryCanadalicense‐exemptRSSStandard(s).Operationis subjecttothefollowingtwoconditions:...

[Page 3] Peavey XR-AT

ENGLISH XR ® - AT Powered Mixer Congratulations on the purchase of your new XR ® -AT powered mixer from Peavey ® . The Peavey XR-AT is a revolutionary all-in-one powered mixer that provides everything a musician or DJ needs, including up to eigh...

[Page 4] Peavey XR-AT

MIC/LINE INPUT (CH.1-8) This combination input jack can accept either a 1/4" (balanced or unbalanced) input or an XLR balanced, low-impedance connection. The tip is positive on the 1/4" balanced input, and pin 2 is positive on the XLR...

[Page 5] Peavey XR-AT

Channel Controls MID EQ (CH. 8 & 9) The mid EQ is a band-pass (peak/notch) type of active tone control that varies the mid-range frequencies (+/-15dB at 450Hz). LOW EQ A shelving type of EQ that varies the bass frequency levels (+/- 15dB at ...

[Page 6] Peavey XR-AT

USB PLAYBACK: First, make sure channel 9 is in USB playback mode by checking the status of the Ch 9 INPUT button (37). When the switch is dark, channel 9 is in USB playback mode. If it is blinking or solid blue, it is in Bluetooth mode. The b...

[Page 7] Peavey XR-AT

EFX TO MON This switch toggles the EFX return signal being sent to the monitors. When it is lit, the effects signal is being sent to the monitors. POWER AMP 2 ASSIGN This switch allows the user to select the signal that is assigned to power amp ...

[Page 8] Peavey XR-AT

EDIT AUTO-TUNE The Edit Auto-Tune ® switch is used to enter Auto-Tune editing mode. When it is engaged (lit), the current Auto-Tune preset will be displayed on the LCD. When it is disengaged (dark), the current EFX preset will be displayed ...

[Page 9] Peavey XR-AT

EFFECTS EDIT MODE: In EFX Edit Mode, the EFX Select knob is used to navigate through the EFX presets. Turning the knob changes the EFX preset in the display. The new selection will be blinking in the display; push the EFX Select knob to choose...

[Page 10] Peavey XR-AT

Auto-Tune Key Table Key Display Note Number (n)= Key 0 1 2 3 4 5 6 7 8 9 10 11 Chrom C C# D D# E F F# G G# A A# B C Maj C D E F G A B C Mnr C D D# F G G# A# C#Maj C C# D# F F# G# ...

[Page 11] Peavey XR-AT

Inputs/Outputs GLOBAL PHANTOM POWER This switch, when depressed, applies +48 VDC to all input XLR connectors to power microphones that need phantom power to work. This switch applies +48 VDC voltage to the input XLR connectors to power micropho...

[Page 12] Peavey XR-AT

Rear Panel POWER SWITCH This is the main power switch. FUSE This is the main safety fuse for the AC line voltage. Only replace with a fuse of the exact type and rating. If the fuse continues to open, do not over fuse. Take the unit to an authori...

[Page 13] Peavey XR-AT

AUTO-TUNE FOOTSWITCH MIDI In/Footswitch This 8-pin DIN connector is provided for the connection of the Peavey 5-Button MIDI Footswitch. Preferably this should be connected before the mixer is powered up. See the “Peavey 5-Button MIDI Footswitch�...

[Page 14] Peavey XR-AT

Effects (parameter) PLATE (TIME) DESCRIPTION PREDELAY ROOM ROOM SIZE FRONT END HP BACK END LP MORE DESCRIPTIVE DAMP FACTOR NAME P1 Bright 35 ms P2 Gentle LP 48 ms P3 Med LP 62 ms P4 ...

[Page 15] Peavey XR-AT

HI PASS HI PASS 1- 1+ Meridian, MS 39301 Peavey Electronics Corp. P. O. Box 2898 4 3 2 1 D 4 3 2 1 CBA A B C D Sheet Title: Title: Sheet Date: of D LO PASS +48V EQ LO MID HI Graphic EQ with FLS Graphic EQ with FLS EQ LO MID HI LO 80Hz 4kHz MID-MORP...

[Page 16] Peavey XR-AT

Specifications INPUT SENSITIVITY: Mic In to full power at the power amp. Master Volume Nom. Full Nominal -40 dBu -22 dBu Line In to full power at the power amp. Master Volume Nom. Full Nominal -10 dBu +8 dBu CHANNEL EQ: Shelving EQ ...

[Page 17] Peavey XR-AT

Notes ______________________________________________________________________________________________________________________ ______________________________________________________________________________________________________________________ ...

[Page 18] Peavey XR-AT

Notes ______________________________________________________________________________________________________________________ ______________________________________________________________________________________________________________________ ...

[Page 19] Peavey XR-AT

U.S. CUSTOMER WARRANTY REGISTRATION Optional Product Extended Warranty Registration Give us some information and put your extended warranty into effect! 9. How would you describe your level of musicianship/technical expertise? 1. First Name Initi...

[Page 20] Peavey XR-AT

Peavey Electronics Corporation Attn: Warranty Department P.O. Box 1150 Meridian, Ms 39302-1150 FROM: Place Postage Here ...