TP-Link Archer VR300 User Manual

Download or browse on-line these Operation & User’s Manual for TP-Link Archer VR300 Modem.

TP-Link Archer VR300 Manual Information:

This manual for TP-Link Archer VR300, given in the PDF format, is available for free online viewing and download without logging on. The guide contains 98 pages, and the size of the file at download is . The document type is Operation & User’s Manual.

Download Manual

Summary of Contents:

[Page 1] TP-Link Archer VR300

REV1.0.0 1910012157 User Guide AC1200 Wireless VDSL/ADSL Modem Router Archer VR300 ...

[Page 2] TP-Link Archer VR300

Contents About This Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 Chapter 1. Get to Know Your Modem Router . . . . . . . . . . . . . . . . . . . . . . . . . .2 1. 1. Product Overvi...

[Page 3] TP-Link Archer VR300

Chapter 9. Bandwidth Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 Chapter 10. Network Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 10. 1. Firewall & DoS P...

[Page 4] TP-Link Archer VR300

Chapter 14. Administrate Your Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73 14. 1. Set System Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74 14...

[Page 5] TP-Link Archer VR300

1 About This Guide This guide is a complement to Quick Installation Guide. The Quick Installation Guide provides instructions for quick internet setup, while this guide contains details of each function and demonstrates how to configure them in typ...

[Page 6] TP-Link Archer VR300

Chapter 1 Get to Know Your Modem Router This chapter introduces the modem router by detailing its main features and appearance. It contains the following sections: • Product Overview • Physical Appearance ...

[Page 7] TP-Link Archer VR300

3 Chapter 1 Get to Know Your Modem Router 1. 1. Product Overview TP-Link’s modem router is a combined wired/wireless network connection device with wireless router and DSL modem capabilities. With DSL and LAN/WAN ports, the modem router is comp...

[Page 8] TP-Link Archer VR300

4 Chapter 1 Get to Know Your Modem Router LED Explanation Color Status Indication Orange Flashing Slowly The system is starting up, or DSL synchronization is complete but there is no internet connection. Flashing Quickly DSL synchronization is i...

[Page 9] TP-Link Archer VR300

5 Chapter 1 Get to Know Your Modem Router Item Description POWER Port For connecting the modem router to a power socket via the provided power adapter. ON/OFF Button The switch for the power. Press it to power on or off the modem router. RESET But...

[Page 10] TP-Link Archer VR300

Chapter 2 Connect the Hardware This chapter contains the following sections: • Position Your Modem Router • Connect Your Modem Router ...

[Page 11] TP-Link Archer VR300

7 Chapter 2 Connect the Hardware 2. 1. Position Your Modem Router With the modem router, you can access your network from anywhere within the wireless network coverage. However, the wireless signal strength and coverage varies depending on the e...

[Page 12] TP-Link Archer VR300

8 Chapter 2 Connect the Hardware Method 2: Wirelessly Use the default SSID (Wireless Network Name) and Wireless Password printed on the product label of the modem router to connect wirelessly. Method 3: Use the WPS button Wireless devices that sup...

[Page 13] TP-Link Archer VR300

Chapter 3 Log In to Your Modem Router ...

[Page 14] TP-Link Archer VR300

10 Chapter 3 Log In to Your Modem Router With the web management page, it is easy to configure and manage the modem router. The web management page can be used on any Windows, Macintosh or UNIX OS with a Web browser, such as Microsoft Internet Ex...

[Page 15] TP-Link Archer VR300

Chapter 4 Set Up Internet Connections This chapter introduces how to connect your modem router to the internet. The modem router is equipped with a web-based Quick Setup wizard. It has many ISP information built in, automates many of the steps and...

[Page 16] TP-Link Archer VR300

12 Chapter 4 Set Up Internet Connections 4. 1. Use Quick Setup Wizard 1. Visit http://tplinkmodem.net, and log in with your TP-Link ID or the password you set for the router. 2. Click Quick Setup on the top of the page. Then follow the step-by-...

[Page 17] TP-Link Archer VR300

13 Chapter 4 Set Up Internet Connections 3. Click Save to make the settings effective, and you can refer to Test Internet Connectivity to test the internet connection. Tips: You can view and edit all internet connection settings on the Advanced ...

[Page 18] TP-Link Archer VR300

14 Chapter 4 Set Up Internet Connections 3. Click Start to test the internet connectivity and you will see the test result in the gray box. 4. 4. Set Up an IPv6 Connection If your ISP has provided a DSL line that supports IPv6 connection as we...

[Page 19] TP-Link Archer VR300

15 Chapter 4 Set Up Internet Connections 5. Scroll down the page, enable IPv6, and configure the IPv6 parameters. • Addressing Type: Consult your ISP for the addressing type (DHCPv6 or SLAAC). SLAAC is the most commonly used addressing type. �...

[Page 20] TP-Link Archer VR300

16 Chapter 4 Set Up Internet Connections 6. Click Save to make the settings effective. Tips: 1. You can view and edit all internet connections on Advanced > Network > Internet page. 2. In the Wireless Router Mode, you can also permit IPv...

[Page 21] TP-Link Archer VR300

Chapter 5 TP-Link Cloud Service TP-Link Cloud service provides a better way to manage your cloud devices. Log in to your router with a TP-Link ID, and you can easily monitor and manage your home network when you are out and about via the Tether app...

[Page 22] TP-Link Archer VR300

18 Chapter 5 TP-Link Cloud Service 5. 1. Register a TP-Link ID If you have skipped the registration during the Quick Setup process, you can: 1. Visit http://tplinkmodem.net, and log in with the password you set for the router. 2. Go to Basic >...

[Page 23] TP-Link Archer VR300

19 Chapter 5 TP-Link Cloud Service ¾ Change your password 1. Click behind the Password. 2. Enter the current password, then a new password twice. And click Save. 5. 3. Manage the User TP-Link IDs The first-time login TP-Link ID will be bound a...

[Page 24] TP-Link Archer VR300

20 Chapter 5 TP-Link Cloud Service • Add/remove other TP-Link IDs to/from the router. 5. 3. 1. Add an TP-Link ID to Manage the Router 1. Visit http://tplinkmodem.net, and log in with your TP-Link ID. 2. Go to Basic > TP-Link Cloud, and focus...

[Page 25] TP-Link Archer VR300

21 Chapter 5 TP-Link Cloud Service 5. 4. Manage the Router via TP-Link Tether App The Tether app runs on iOS and Android devices like smartphones and tablets. 1. Open the Apple App Store or Google Play and search the key word TP-Link Tether or ...

[Page 26] TP-Link Archer VR300

Chapter 6 IPTV IPTV is the abbreviation of Internet Protocol Television. The service can only be delivered through the Internet, and our modem router provides a specific LAN port for IPTV. By automatically separating IPTV from Internet surfing, you...

[Page 27] TP-Link Archer VR300

23 Chapter 6 IPTV Configure the modem router to enable Internet Protocol Television (IPTV) Services. For example, I already bought IPTV service, but this service can only be delivered through the Internet. Therefore, I need to configure my modem...

[Page 28] TP-Link Archer VR300

Chapter 7 Guest Network This function allows you to provide Wi-Fi access for guests without disclosing your main network. When you have guests in your house, apartment, or workplace, you can create a guest network for them. In addition, you can ass...

[Page 29] TP-Link Archer VR300

25 Chapter 7 Guest Network 7. 1. Create a Network for Guests 1. Visit http://tplinkmodem.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > Guest Network. Locate the Wireless Settings section. 3....

[Page 30] TP-Link Archer VR300

26 Chapter 7 Guest Network 2. Go to Advanced > Guest Network. 3. Assign network authorities and bandwidth according to your needs. • Allow Guests to Access Each Other Select this check box to allow the clients in your guest network to acces...

[Page 31] TP-Link Archer VR300

Chapter 8 Parental Controls This function allows you to block inappropriate, explicit and malicious websites and limit internet access during specified time periods. ...

[Page 32] TP-Link Archer VR300

28 Chapter 8 Parental Controls Control what types of websites my children or other home network users can visit and the time of day they are allowed to access the internet. For example, I want to allow my children’s devices (for example, a com...

[Page 33] TP-Link Archer VR300

29 Chapter 8 Parental Controls 4. Click Scan, and add the device to be controlled. Or, enter the Device Name and MAC Address manually. 5. Click the icon to set the Effective Time. Drag the cursor over the appropriate cell(s) and click OK. 6....

[Page 34] TP-Link Archer VR300

30 Chapter 8 Parental Controls 1 ) In Blacklist mode, the controlled devices cannot access any websites containing the specified keywords during the Effective Time period. 2 ) In Whitelist mode, the controlled devices can only access websites ...

[Page 35] TP-Link Archer VR300

Chapter 9 Bandwidth Control This feature is used to fully utilize your limited bandwidth and optimize the load respectively. With this feature enabled, you can assign a specific minimum or maximum bandwidth for each computer, thus minimizing the im...

[Page 36] TP-Link Archer VR300

32 Chapter 9 Bandwidth Control Use an independent bandwidth and enjoy a good Internet experience without being affected by other users who are sharing the same router. For example, my roommate and I share 512Kbps upstream bandwidth and 4Mbps dow...

[Page 37] TP-Link Archer VR300

33 Chapter 9 Bandwidth Control 1 ) IP Range: Enter the IP address. The field can be single IP address or IP address range according to your demands. When you configure the single IP address, the computer with this IP address will get independen...

[Page 38] TP-Link Archer VR300

Chapter 10 Network Security This chapter guides you on how to protect your home network from unauthorized users by implementing these network security functions. You can block or allow specific client devices to access your wireless network using M...

[Page 39] TP-Link Archer VR300

35 Chapter 10 Network Security 10. 1. Firewall & DoS Protection The SPI (Stateful Packet Inspection) Firewall and DoS (Denial of Service) Protection protect the router from cyber attacks. The SPI Firewall can prevent cyber attacks and valid...

[Page 40] TP-Link Archer VR300

36 Chapter 10 Network Security 2. The protection will be triggered immediately when the number of packets exceeds the preset threshold value, and the vicious host will be displayed in the Blocked DoS Host List. 10. 2. Service Filtering With Serv...

[Page 41] TP-Link Archer VR300

37 Chapter 10 Network Security 5. Select a Service Type from the drop-down list and the following four fields will be auto-populated. Select Custom when your desired service type is not listed, and enter the information manually. 6. Specify the...

[Page 42] TP-Link Archer VR300

38 Chapter 10 Network Security 3. Select the access mode to either block (recommended) or allow the device(s) in the list. To block specific device(s) 1 ) Select Blacklist and click Save. 2 ) Select the device(s) to be blocked in the Devices On...

[Page 43] TP-Link Archer VR300

39 Chapter 10 Network Security 3 ) Enter the Device Name and MAC Address. (You can copy and paste the information from Devices Online table if the device is connected to your network.) 4 ) Click OK. Now you can block or allow specific client de...

[Page 44] TP-Link Archer VR300

40 Chapter 10 Network Security 2 ) Click Bind to add to the Binding List. To bind the unconnected device 1 ) Click Add. 2 ) Enter the MAC address and IP address that you want to bind. 3 ) Select the check box to enable the entry and click OK. ...

[Page 45] TP-Link Archer VR300

41 Chapter 10 Network Security 4. Select an interface name from the drop-down list. Interface names are names of the internet connections you have set up. 5. Click Scan to select a service from the list to automatically populate the Port field ...

[Page 46] TP-Link Archer VR300

Chapter 11 NAT Forwarding Modem router’s NAT (Network Address Translation) feature makes the devices in the LAN use the same public IP address to communicate in the internet, which protects the local network by hiding IP addresses of the devices....

[Page 47] TP-Link Archer VR300

43 Chapter 11 NAT Forwarding 11. 1. Translate Address and Port by ALG ALG (Application Layer Gateway) allows customized NAT (Network Address Translation) traversal filters to be plugged into the gateway to support address and port translation fo...

[Page 48] TP-Link Archer VR300

44 Chapter 11 NAT Forwarding • RTSP ALG: If enabled, it allows RTSP (Real-Time Stream Protocol) clients and servers to transfer data via NAT. 11. 2. Share Local Resources over the Internet by Virtual Server When you build up a server in the l...

[Page 49] TP-Link Archer VR300

45 Chapter 11 NAT Forwarding 4. Click Scan, and choose HTTP. The external port, internal port and protocol will be automatically filled with contents. Enter the PC’s IP address 192.168.1.100 in the Internal IP field. 5. Click OK to save the s...

[Page 50] TP-Link Archer VR300

46 Chapter 11 NAT Forwarding address of the host. When the data from the internet returns to the external ports, the modem router can forward them to the corresponding host. Port triggering is mainly applied to online games, VoIPs and video playe...

[Page 51] TP-Link Archer VR300

47 Chapter 11 NAT Forwarding all ports opened. When you are not clear about which ports to open in some special applications, like IP camera and database software, you can set the PC to be a DMZ host. Note: DMZ is most applicable when you don’t...

[Page 52] TP-Link Archer VR300

48 Chapter 11 NAT Forwarding seamless connection of the network. You may need to enable the UPnP if you want to use applications such as multiplayer gaming, peer-to-peer connections, real-time communication (for example, VoIP or telephone confere...

[Page 53] TP-Link Archer VR300

Chapter 12 VPN Server The VPN (Virtual Private Networking) Server allows you to access your home network in a secured way through the internet when you are out of the house. IPSec (Internet Protocol Security) is a set of services and protocols defin...

[Page 54] TP-Link Archer VR300

50 Chapter 12 VPN Server 12. 1. Use IPSec VPN to Access Your Home Network IPSec VPN is used to create a VPN connection between local and remote networks. To use IPSec VPN, you should check that both local and remote routers support IPSec VPN fea...

[Page 55] TP-Link Archer VR300

51 Chapter 12 VPN Server 3 ) In the IPSec Connection Name column, specify a name. 4 ) In the Remote IPSec Gateway (URL) column, Enter Site B’s WAN IP address. 5 ) Configure Site A’s LAN. In the Tunnel access from local IP addresses column,...

[Page 56] TP-Link Archer VR300

52 Chapter 12 VPN Server 8 ) Enter the Pre-Shared Key for IKE authentication. Then keep Perfect Forward Secrecy enabled. Note: Make sure Site A and Site B use the same key. 9 ) Leave the Advanced Settings as default value. Then click Save. Note:...

[Page 57] TP-Link Archer VR300

53 Chapter 12 VPN Server Note: 1. The product supports a maximum of ten simultaneous connections. 2. If one of the site has been offline for a while, for example, if Site A has been disconnected, on Site B you need to click Disable and then cli...

[Page 58] TP-Link Archer VR300

Chapter 13 Specify Your Network Settings This chapter introduces how to change the default settings or adjust the basic configuration of the modem router using the web management page. It contains the following sections: • LAN Settings • IPv6...

[Page 59] TP-Link Archer VR300

55 Chapter 13 Specify Your Network Settings 13. 1. LAN Settings 13. 1. 1. Change the LAN IP Address The modem router is preset with a default LAN IP 192.168.1.1, which you can use to log in to its web management page. The LAN IP address together...

[Page 60] TP-Link Archer VR300

56 Chapter 13 Specify Your Network Settings 13. 1. 2. Use the Modem Router as a DHCP Server You can configure the modem router to act as a DHCP server to assign IP addresses to its clients. To use the DHCP server function of the modem router, you...

[Page 61] TP-Link Archer VR300

57 Chapter 13 Specify Your Network Settings 13. 1. 3. Reserve LAN IP Addresses You can view and add a reserved address for a client. When you specify an IP address for a device on the LAN, that device will always receive the same IP address each ...

[Page 62] TP-Link Archer VR300

58 Chapter 13 Specify Your Network Settings 13. 2. 1. Configure the RADVD Address Type 1. Visit http://tplinkmodem.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > Network > LAN Settings. ...

[Page 63] TP-Link Archer VR300

59 Chapter 13 Specify Your Network Settings 1 ) Select the DHCPv6 Server address type to make the modem router assign IPv6 addresses to hosts. 2 ) Specify the Start/End IPv6 Address for the IPv6 suffixes. The modem router will generate IPv6 ad...

[Page 64] TP-Link Archer VR300

60 Chapter 13 Specify Your Network Settings ¾ To enable or disable the wireless function: Enable the 2.4 GHz or 5GHz Wireless Network. If you don’t want to use the wireless function, just deselect the box. If you disable the wireless function,...

[Page 65] TP-Link Archer VR300

61 Chapter 13 Specify Your Network Settings • 802.11a/n/ac mixed (5GHz): Select if you are using a mix of 802.11a, 802.11n and 802.11ac wireless clients. It is strongly recommended that you select 11a/n/ac mixed. Channel: Select the channel yo...

[Page 66] TP-Link Archer VR300

62 Chapter 13 Specify Your Network Settings 3. Click Start WPS on the page. 4. Press the WPS button of the client device directly. 5. The router’s LED flashes quickly for about 2 minutes during the WPS process. 6. When the LED is on, the cl...

[Page 67] TP-Link Archer VR300

63 Chapter 13 Specify Your Network Settings 2. Go to Advanced > Wireless > WPS page. Click Method Two--PIN. 3. Select Client’s PIN. 4. Enter the client device’s PIN in the field. Then click the Connect button. 5. Connect successful...

[Page 68] TP-Link Archer VR300

64 Chapter 13 Specify Your Network Settings Note: 1. Make sure that the time of the router is correct before using this function. For details, refer to Set System Time. 2. The wireless network will be automatically turned on after the time period...

[Page 69] TP-Link Archer VR300

65 Chapter 13 Specify Your Network Settings 2. Go to Advanced > Wireless > Advanced Settings page. • Beacon Interval: Enter a value between 25 and 1000 in milliseconds to determine the duration between which beacon packets are broadca...

[Page 70] TP-Link Archer VR300

66 Chapter 13 Specify Your Network Settings • Short GI: This feature is enabled by default and recommended to increase the data capacity by reducing the Guard Interval (GI) time. • AP Isolation: Select this check box to enable the AP Isolati...

[Page 71] TP-Link Archer VR300

67 Chapter 13 Specify Your Network Settings 6. Click Log in and Save. Tips: If you want to use a new DDNS account, please Logout first, then login with the new account. 13. 5. Interface Grouping Divide my devices connected to the modem router int...

[Page 72] TP-Link Archer VR300

68 Chapter 13 Specify Your Network Settings 3. Name the group. 4. Check the boxes of LAN1 and LAN3 in Available LAN. Here Wi-Fi 2.4G network and Wi-Fi 5G network are viewed as a LAN interface respectively. 5. Click Enable Group Isolation to is...

[Page 73] TP-Link Archer VR300

69 Chapter 13 Specify Your Network Settings static routing. Company’s server My PC Router 2 Modem router Switch LAN: 192.168.1.1 192.168.1.100 LAN: 192.168.1.2 WAN: 172.30.30.100 172.30.30.1 1. Make sure the routers use different LAN IP addresse...

[Page 74] TP-Link Archer VR300

70 Chapter 13 Specify Your Network Settings • Network Destination: The destination IP address that you want to assign to a static route. This IP address cannot be on the same subnet with the WAN IP or LAN IP of the router. In the example, the...

[Page 75] TP-Link Archer VR300

71 Chapter 13 Specify Your Network Settings 13. 7. Set Up the IPv6 Tunnel The IPv6 Tunnel feature helps you obtain IPv6 resources based on an IPv4 WAN connection or vice versa. IPv6 Tunnel is a transition mechanism that allows isolated IPv6 hosts...

[Page 76] TP-Link Archer VR300

72 Chapter 13 Specify Your Network Settings 13. 7. 2. Specify the 6rd Tunnel with Parameters Provided by Your ISP Specify the 6rd tunnel with the parameters provided by my 6rd tunnel service provider. 1. Visit http://tplinkmodem.net, and log in ...

[Page 77] TP-Link Archer VR300

Chapter 14 Administrate Your Network This chapter introduces how to change the system settings and administrate your modem router’s network. This chapter contains the following sections: • Set System Time • Update the Firmware • Back up ...

[Page 78] TP-Link Archer VR300

74 Chapter 14 Administrate Your Network 14. 1. Set System Time System time is the time displayed while the modem router is running. The system time you configure here will be used for other time-based functions like Parental Controls and Wirele...

[Page 79] TP-Link Archer VR300

75 Chapter 14 Administrate Your Network 14. 2. Update the Firmware TP-Link is dedicated to improving product features, giving you a better network experience. We will inform you through the web management page if there’s any update firmware ...

[Page 80] TP-Link Archer VR300

76 Chapter 14 Administrate Your Network 3. Wait a few moments for the upgrading and rebooting. 14. 2. 2. Local Upgrade 1. Download the latest firmware file for the router from our website www.tp-link.com. 2. Visit http://tplinkmodem.net, and lo...

[Page 81] TP-Link Archer VR300

77 Chapter 14 Administrate Your Network ¾ To restore configuration settings 1. Visit http://tplinkmodem.net, and log in with your TP-Link ID or the password you set for the router. 2. Click Advanced > System Tools > Backup & Restor...

[Page 82] TP-Link Archer VR300

78 Chapter 14 Administrate Your Network 3. Enter the old password. Enter the new password and enter again to confirm. 4. Click Save to make the settings effective. 14. 5. Local Management You can control the local devices’ authority to manage...

[Page 83] TP-Link Archer VR300

79 Chapter 14 Administrate Your Network Now, you can manage the modem router over both HTTP (http://tplinkmodem.net) and HTTPS (https://tplinkmodem.net). Note: If you want that all local devices can manage the modem router, just leave the IP/MAC...

[Page 84] TP-Link Archer VR300

80 Chapter 14 Administrate Your Network All devices or the specific device on the internet can log in to your router using the address displayed on the Manage This Router via the Address field to manage the modem router. Tips: 1. If you were wa...

[Page 85] TP-Link Archer VR300

81 Chapter 14 Administrate Your Network You can choose to save the system logs to your local computer or a remote server. Click Save Log to save the logs in a txt file to your computer. Click Log Settings to set the storage path of logs. • Save...

[Page 86] TP-Link Archer VR300

82 Chapter 14 Administrate Your Network • CWMP: Toggle On to enable the CWMP (CPE WAN Management Protocol) feature. • Inform: Enable this feature to send an Inform message to the ACS (Auto Configuration Server) periodically. • Inform I...

[Page 87] TP-Link Archer VR300

83 Chapter 14 Administrate Your Network • Get RPC methods: Click to get the methods to support CWMP. Click Save to make the settings effective. 14. 9. SNMP Settings SNMP (Simple Network Management Protocol) is widely applied in the computer n...

[Page 88] TP-Link Archer VR300

84 Chapter 14 Administrate Your Network • SNMP Agent for WAN: Toggle On to allow management from the WAN side using SNMP. • Read-only Community: Displays the default public community string that protects the router from unauthorized access...

[Page 89] TP-Link Archer VR300

85 Appendix: Troubleshooting T1. How do I restore my modem router’s configuration to its factory default settings? With the modem router powered on, press and hold the RESET button on the modem router for approximately 2 seconds until the LED fla...

[Page 90] TP-Link Archer VR300

86 4 ) Click LAN settings, deselect the following three options and click OK; 5 ) Go to Advanced > Restore advanced settings, click OK to save the settings. ...

[Page 91] TP-Link Archer VR300

87 • Change a web browser or computer and log in again. • Reset the modem router to factory default settings. Refer to Back up and Restore Configuration Settings for detailed information. Open a web browser and log in again. If login fails,...

[Page 92] TP-Link Archer VR300

88 6. Please contact our Technical Support if the problem persists. T5. How do I clone a MAC address? You can manually change the MAC address of the modem router. It is helpful when your internet access account provided by your ISP is bound to one...

[Page 93] TP-Link Archer VR300

89 6 ) Click OK. • For Windows 7/8/8.1/10: 1 ) Right-click the Network icon on the system tray and select Open Network and Sharing Center > Change adapter settings. 2 ) Right-click your network connection (wired or wireless) and select Pr...

[Page 94] TP-Link Archer VR300

90 ¾ If you can find your wireless network but fail to connect, follow the steps below: 1. Authentication problem: Network Security Key Mismatch. 1 ) Sometimes you will be asked to type in a PIN number when you connect to the wireless network fo...

[Page 95] TP-Link Archer VR300

91 4 ) Connect to wireless network. 2. Windows was unable to connect to XXXX /Cannot join this network/Taking longer than usual to connect to this network. 1 ) Check the wireless signal strength of your network, if it is weak (1~3 bars), please ...

[Page 96] TP-Link Archer VR300

92 COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. is a registered trademark of TP-Link Technologies Co., Ltd. Other brands and product names are trademarks or registered trademarks of their respective holders. No ...

[Page 97] TP-Link Archer VR300

93 CE Mark Warning This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. OPERATING FREQUENCY(the maximum transmitted power) 2412MHz—247...

[Page 98] TP-Link Archer VR300

94 Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk. For EU/E...