Hitachi CPX467 User Manual

[Page 1] Hitachi CP-X467

1 Projector CP-X467 User's Manual (detailed) Operating Guide Thank you for purchasing this projector. ►Before using this product, please read all manuals for this product. Be sure to read “Safety Guide” rst. After reading them, store...

[Page 2] Hitachi CP-X467

2 Contents Contents About this manual ...........1 Contents . . . . . . . . . . . . . . . . . . 2 Projector features ...........3 Preparations ...............3 Contents of package .............3 Fastening the lens cover ..........3 Part names . . . ...

[Page 3] Hitachi CP-X467

3 Projector features / Preparations • Keep the original packing materials, for future reshipment. Be sure to use the original packing materials when moving the projector. Use special caution for the lens. • To use the wireless network function...

[Page 4] Hitachi CP-X467

4 Part names Part names Projector (1) Lamp cover (67) The lamp unit is inside. (2) Focus ring ( 20) (3) Zoom ring ( 20) (4) Control panel ( 5) (5) Elevator buttons (x 2) ( 20) (6) Elevator feet (x 2) ( 20) (7) Remote sensor ( ...

[Page 5] Hitachi CP-X467

5 SD CARD BATTERY Part names Control panel (1) STANDBY/ON button (16) (2) INPUT button ( 17, 24) (3) MENU button ( 24) It consists of four cursor buttons. (4) POWER indicator ( 16, 74) (5) TEMP indicator ( 74) (6) LAMP indicator ( ...

[Page 6] Hitachi CP-X467

6 Part names Remote control (1) VIDEO button (18) (2) COMPUTER button ( 17) (3) SEARCH button ( 19) (4) STANDBY/ON button ( 16) (5) ASPECT button ( 19) (6) AUTO button ( 21) (7) BLANK button ( 23) (8) MAGNIFY - ON button ( 22...

[Page 7] Hitachi CP-X467

7 Setting up Setting up Install the projector according to the environment and manner the projector will be used in. Arrangement Refer to the illustrations and tables below to determine screen size and projection distance. The values shown in the t...

[Page 8] Hitachi CP-X467

8 Setting up ►Place the projector in a stable horizontal position. If the projector falls or is knocked over, it could cause injury and/or damage to the projector. Using a damaged projector could then result in re and/or electric shock. • ...

[Page 9] Hitachi CP-X467

9 Setting up RGB IN AUDIO IN Y CB/PB CR/PR COMPONENT VIDEO OUT L R AUDIO OUT VIDEO OUT L R AUDIO OUT L R AUDIO OUT S-VIDEO OUT AUDIO OUT RGB OUT AUDIO OUT USB RGB OUT RS-232C HDMI OUT Connecting your devices Be ...

[Page 10] Hitachi CP-X467

10 SD CARD BATTERY LAN Connecting your devices (continued) To use MIU (Multi Information processing Unit) function, please connect at least one of the devices drawn in the following illustration to the projector. (continued on next page) SD card U...

[Page 11] Hitachi CP-X467

11 Connecting your devices (continued) NOTE • Before using the projector with a wired LAN, please remove the wireless network card. Using a USB storage In order to view images stored in a USB storage, such as a USB memory, insert the device into...

[Page 12] Hitachi CP-X467

12 Setting up • Be sure to read the manuals for devices before connecting them to the projector, and make sure that all the devices are suitable to be connected with this product. Before connecting to a PC, check the signal level, the signal ti...

[Page 13] Hitachi CP-X467

13 Setting up Connecting power supply 1. Put the connector of the power cord into the AC IN (AC inlet) of the projector. 2. Firmly plug the power cord’s plug into the outlet. ►Please use extra caution when connecting the power cord, as incorr...

[Page 14] Hitachi CP-X467

14 Remote control Remote control About the remote control signal The remote control works with the projector’s remote sensor. This projector has a remote sensor on the front. The sensor senses the signal within the following range when the senso...

[Page 15] Hitachi CP-X467

15 Remote control Changing the frequency of remote control signal The accessory remote control has the two choices on signal frequency Mode 1:NORMAL and Mode 2:HIGH. If the remote control does not function properly, attempt to change the signal fr...

[Page 16] Hitachi CP-X467

16 Power on/off 1. Make sure that the power cord is rmly and correctly connected to the projector and the outlet. Turning on the power 2. Remove the lens cover, and set the power switch to ON position (marked “ I ”). The POWER indicator wi...

[Page 17] Hitachi CP-X467

17 COMPUTER IN 1  COMPUTER IN 2  HDMI  MIU VIDEO  S-VIDEO  COMPONENT (Y, Cb/Pb, Cr/Pr) Operating Operating 1. Adjusting the volume Use the VOLUME +/VOLUME - buttons to adjust the volume. A dialog will appear...

[Page 18] Hitachi CP-X467

18 VIDEO DOC.CAMERA KEYSTONE ASPECT SEARCH BLANK MUTE MY BUTTON POSITION 12 ESC ENTER MENU RESET COMPUTER MY SOURCE/ AUTO MAGNIFY PAGE UP VOLUME DOWN ࡯ ON OFF 㧗 FREEZE Operating 1. Press VIDEO button on the remote control. Each time you...

[Page 19] Hitachi CP-X467

19 1. Press ASPECT button on the remote control. Each time you press the button, the projector switches the mode for aspect ratio in turn. Selecting an aspect ratio ● ASPECT button does not work when no proper signal is inputted. ● NORMAL m...

[Page 20] Hitachi CP-X467

20 Operating Adjusting the projector's elevator When the place to put the projector is slightly uneven to the left or right, use the elevator feet to place the projector horizontally. Using the feet can also tilt the projector in order to pro...

[Page 21] Hitachi CP-X467

21 Operating 1. Press POSITION button on the remote control when no menu is indicated. The “POSITION” indication will appear on the screen. Adjusting the position 2. Use the ▲/▼/◄/► cursor buttons to adjust the picture position. When y...

[Page 22] Hitachi CP-X467

22 Operating 1. Press KEYSTONE button on the remote control. A dialog will appear on the screen to aid you in correcting the distortion. Correcting the keystone distortions 2. Use the ▲/▼ cursor buttons to select AUTO, MANUAL or PERFECT FIT o...

[Page 23] Hitachi CP-X467

23 • The zoom level can be nely adjusted. Closely watch the screen to nd the level you want. NOTE 1. Press the ON button of MAGNIFY on the remote control. The “MAGNIFY” indication will appear on the screen and the projector will go i...

[Page 24] Hitachi CP-X467

24 Operating 1. Press the MENU button on the remote control or the projector. The Advanced Menu or EASY MENU, which has priority just after powered on will appear. If you want to move the menu position, use the cursor buttons after pressing the...

[Page 25] Hitachi CP-X467

25 Operating Using the menu function (continued) ● Some functions cannot be performed when a certain input port is selected, or when a certain input signal is displayed. ● When you want to reset the operation, press RESET button on the remote...

[Page 26] Hitachi CP-X467

26 EASY MENU EASY MENU From the EASY MENU, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons. Then perform it according to the following table. Item Description ASPECT Using the ◄/► buttons swit...

[Page 27] Hitachi CP-X467

27 EASY MENU EASY MENU (continued) Item Description BRIGHTNESS Using the ◄/► buttons adjusts the brightness. See BRIGHTNESS item in PICTURE menu (  28). CONTRAST Using the ◄/► buttons adjusts the contrast. See CONTRAST item in PICTURE m...

[Page 28] Hitachi CP-X467

28 PICTURE menu PICTURE menu From the PICTURE menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or ENTER button to execute the item. Then perform it according ...

[Page 29] Hitachi CP-X467

29 PICTURE menu PICTURE menu (continued) Item Description COLOR TEMP Using the ▲/▼ buttons switches the color temperature mode. To adjust CUSTOM Selecting a mode whose name includes CUSTOM and then pressing the ► button or the ENTER button d...

[Page 30] Hitachi CP-X467

30 PICTURE menu PICTURE menu (continued) Item Description SHARPNESS Using the ▲/▼ buttons adjusts the sharpness. Strong ó Weak • There may be some noise and/or the screen may icker for a moment when an adjustment is made. This is not a ...

[Page 31] Hitachi CP-X467

31 IMAGE menu IMAGE menu From the IMAGE menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or ENTER button to execute the item. Then perform it according to the ...

[Page 32] Hitachi CP-X467

32 IMAGE menu IMAGE menu (continued) Item Description H POSITION Using the ▲/▼ buttons adjusts the horizontal position. Left ó Right • Over-adjusting the horizontal position may cause noise to appear on the screen. If this occurs, please r...

[Page 33] Hitachi CP-X467

33 INPUT menu INPUT menu From the INPUT menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or ENTER button to execute the item. Then perform it according to the ...

[Page 34] Hitachi CP-X467

34 INPUT menu INPUT menu (continued) Item Description VIDEO FORMAT The video format for S-VIDEO port and VIDEO port can be set. (1) Use the ◄/► buttons to select the input port. (2) Using the ▲/▼ buttons switches the mode for video format....

[Page 35] Hitachi CP-X467

35 INPUT menu INPUT menu (continued) Item Description COMPUTER IN (continued) Selecting the AUTO mode allows you to input a sync on G signal or component signal from the port. • In the AUTO mode, the picture may be distorted with certain input ...

[Page 36] Hitachi CP-X467

36 SETUP menu SETUP menu From the SETUP menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or the ENTER button to execute the item. Then perform it according to ...

[Page 37] Hitachi CP-X467

37 SETUP menu Item Description KEYSTONE Using the ▲/▼ buttons corrects the horizontal keystone distortion. Shrink the right of the image ó Shrink the left of the image • The adjustable range of this function will vary among inputs. For so...

[Page 38] Hitachi CP-X467

38 SETUP menu SETUP menu (continued) Item Description MIRROR Using the ▲/▼ buttons switches the mode for mirror status. NORMAL ó H:INVERT ó V:INVERT ó H&V:INVERT If the Transition Detector is TURN ON and MIRROR stat...

[Page 39] Hitachi CP-X467

39 AUDIO menu AUDIO menu From the AUDIO menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or the ENTER button to execute the item. Then perform it according to ...

[Page 40] Hitachi CP-X467

40 SCREEN menu SCREEN menu From the SCREEN menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or ENTER button to execute the item. Then perform it according to t...

[Page 41] Hitachi CP-X467

41 Item Description START UP Using the ▲/▼ buttons switches the mode for the start-up screen. The start-up screen is a screen displayed when no signal or an unsuitable signal is detected. MyScreen ó ORIGINAL ó TURN OFF Feature ...

[Page 42] Hitachi CP-X467

42 SCREEN menu SCREEN menu (continued) Item Description MyScreen (continued) When the registration is completed, the registered screen and the following message are displayed for several seconds: “MyScreen registration is nished.” If the reg...

[Page 43] Hitachi CP-X467

43 SCREEN menu SCREEN menu (continued) Item Description SOURCE NAME Each input port for this projector can have a name applied to it. (1) Use the ▲/▼ buttons on the SCREEN menu to select SOURCE NAME and press the ► button. The SOURCE NAME ...

[Page 44] Hitachi CP-X467

44 OPTION menu OPTION menu From the OPTION menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or ENTER button to execute the item, except for the items LAMP TIME...

[Page 45] Hitachi CP-X467

45 OPTION menu OPTION menu (continued) Item Description AUTO OFF Using the ▲/▼ buttons adjusts the time to count down to automatically turn the projector off. Long (max. 99 minutes) ó Short (min. 0 minute = DISABLE) When the time is set to 0...

[Page 46] Hitachi CP-X467

46 Item Description MY BUTTON This item is to assign one of the following functions to MY BUTTON 1 and 2 on the remote control (  6). Choose 1 or 2 on the MY BUTTON menu using the ◄/► button rst. Then using the ▲/▼ buttons sets one o...

[Page 47] Hitachi CP-X467

47 (continued on next page) OPTION menu OPTION menu (continued) Item Description SERVICE (continued) FAN SPEED Using the ▲/▼ buttons the rotation speed of the cooling fans. The HIGH is the mode for use at highlands etc. Note that the proje...

[Page 48] Hitachi CP-X467

48 OPTION menu OPTION menu (continued) Item Description SERVICE (continued) KEY LOCK Using the ▲/▼ buttons turns on/off the key lock feature. When TURN ON is selected, the buttons on the projector except the STANDBY/ON button a...

[Page 49] Hitachi CP-X467

49 OPTION menu OPTION menu (continued) Item Description SECURITY This projector is equipped with security functions. User registration is required before using the security functions. Please ask your local dealer. 1. Using Security Features 1.1 Inpu...

[Page 50] Hitachi CP-X467

50 OPTION menu OPTION menu (continued) Item Description SECURITY (continued) 1.3 If you have forgotten your PASSWORD 1.3-1 Follow the procedure in 1.1-1 to display the ENTER PASSWORD box. 1.3-2 While the ENTER PASSWORD box is displayed, press an...

[Page 51] Hitachi CP-X467

51 OPTION menu OPTION menu (continued) Item Description SECURITY (continued) 2.2-4 Move the cursor to the right side of the PASSWORD AGAIN box and press the ► button to display the PASSWORD for about 20 seconds, please make note of the PASSWO...

[Page 52] Hitachi CP-X467

52 OPTION menu OPTION menu (continued) Item Description SECURITY (continued) 3.1-2 Use the ▲/▼ buttons on the PIN LOCK on/off menu to select TURN ON and the PIN BOX will be displayed. 3.1-3 Input a 4 part PIN Code using the ▲, ▼, ◄...

[Page 53] Hitachi CP-X467

53 OPTION menu OPTION menu (continued) Item Description SECURITY (continued) 4. Using the Transition Detector Function While the Transition Detector function is on, when power switch is started to supply to the projector, it might react as below. �...

[Page 54] Hitachi CP-X467

54 OPTION menu OPTION menu (continued) Item Description SECURITY (continued) 4.2-4 Move the cursor to the right side of the PASSWORD AGAIN box and press the ► button to display the PASSWORD for about 20 seconds, please make no...

[Page 55] Hitachi CP-X467

55 Item Description SECURITY (continued) 5. Using the MY TEXT PASSWORD function This item allows you to display your own message (MY TEXT) on the START UP screen and INPUT-INFORMATION-. It can be protected by a password to prevent it from being ov...

[Page 56] Hitachi CP-X467

56 Item Description SECURITY (continued) 5.3 Turning on the MY TEXT PASSWORD The MY TEXT PASSWORD function can prevent the MY TEXT from being overwritten. 5.3-1 Turning on the MY TEXT PASSWORD function (1) Use the ▲/▼ buttons on the SECURITY m...

[Page 57] Hitachi CP-X467

57 The MIU (Multi Information processing Unit) is a function to support the Network features and PC-LESS Presentation. Consult with your network administrator before connecting to an existing access point on your network. Incorrect network settin...

[Page 58] Hitachi CP-X467

58 (continued on next page) Item Description LIVE MODE SETTING (continued) MULTI PC MODE The projector supports the Single PC mode that displays an image on full screen sent by 1 PC, and the Multi PC mode that divides the screen into 4 zone ...

[Page 59] Hitachi CP-X467

59 Item Description PC-LESS PRESENTATION Selecting this item displays the PC-LESS PRESENTATION menu. Using the menu is able to make the projector display the images stored in an SD memory card or a USB memory, and realizes a presentation without ...

[Page 60] Hitachi CP-X467

60 Item Description SETUP Selecting this item displays the MIU SETUP menu. Use the ▲/▼ buttons to select an item, and the ► or ENTER button on the remote control to perform the item. DHCP (Dynamic Host Conguration Protocol) Use the ▲...

[Page 61] Hitachi CP-X467

61 Item Description SETUP (continued) TIME DIFFERENCE Use the ▲/▼ buttons to enter the TIME DIFFERENCE. Set the same TIME DIFFERENCE as the one set on your PC. If unsure, consult your IT manager. Use the ◄ button to return to the menu ...

[Page 62] Hitachi CP-X467

62 Item Description SETUP (continued) SSID Use the ▲/▼ buttons to select the SSID to display the SSID menu. DEFAULT Pressing the ► or ENTER button when one of the DEFAULT (#1~#4) is selected. CUSTOM Press the ► or ENTER button when the ...

[Page 63] Hitachi CP-X467

63 Item Description SETUP (continued) SPEED Use the ▲/▼ buttons to select the transfer rate. (M : Mbps : Megabits per second) AUTO ó 54M ó 48M ó 36M ó 24M ó 18M   1M ó 2M ó 5.5M ó 6M ó 9M ó 11M ó 12M • The AUTO...

[Page 64] Hitachi CP-X467

64 Item Description MY IMAGE Selecting this item displays the MY IMAGE menu. Insert the SD memory card or USB memory into the projector before you use the MY IMAGE function (  11). The application software “PJTransfer” is required to sto...

[Page 65] Hitachi CP-X467

65 Item Description INFORMATION Selecting this item displays the MIU-INFORMATION- dialog for conrming the network settings. • The PROJECTOR NAME is displayed. • Nothing (blank) is shown in the “PROJECTOR NAME” and “SSID” field until...

[Page 66] Hitachi CP-X467

66 C.C. (Closed Caption) menu The closed caption setting can be changed through C.C. menu in the advance menu. Please select the item that you will change using ▲/▼ cursor buttons. • The C.C. (Closed Caption) is the function that displays ...

[Page 67] Hitachi CP-X467

67 Maintenance Maintenance A lamp has nite product life. Using the lamp for long periods of time could cause the pictures darker or the color tone poor. Note that each lamp has a different lifetime, and some may burst or burn out soon after yo...

[Page 68] Hitachi CP-X467

68 Maintenance Lamp warning Replacing the lamp (continued) HIGH VOLTAGE HIGH TEMPERATURE HIGH PRESSURE ►The projector uses a high-pressure mercury glass lamp. The lamp can break with a loud bang, or burn out, if jolted or scratched, handled ...

[Page 69] Hitachi CP-X467

69 Maintenance The air lter unit of this projector consists of a lter cover, two kinds of lters, and a lter frame. The new double large lters system is expected to function longer. However, please check and clean it periodically to ...

[Page 70] Hitachi CP-X467

70 Maintenance Cleaning and replacing the air lter (continued) 9. Turn the projector on and reset the lter time using the FILTER TIME item in the EASY MENU. ►Before taking care of the air lter, make sure the power switch is off and the ...

[Page 71] Hitachi CP-X467

71 Maintenance 1. Turn the projector off, and unplug the power cord. Allow the projector to cool sufciently. 2. After making sure that the projector has cooled adequately, pull the slot cover forward, pushing slightly its edge up, and remo...

[Page 72] Hitachi CP-X467

72 Maintenance Other care In order to ensure the safe use of your projector, please have it cleaned and inspected by your dealer about once every year. 1. Turn the projector off, and unplug the power cord. Allow the projector to cool sufciently...

[Page 73] Hitachi CP-X467

73 Troubleshooting Troubleshooting If an abnormal operation should occur, stop using the projector immediately. Otherwise if a problem occurs with the projector, the following checks and measures are recommended before requesting repair. If this d...

[Page 74] Hitachi CP-X467

74 Troubleshooting Regarding the indicator lamps When operation of the LAMP, TEMP and POWER indicators differs from usual, check and cope with it according to the following table. POWER indicator LAMP indicator TEMP indicator Description Lightin...

[Page 75] Hitachi CP-X467

75 Troubleshooting Regarding the indicator lamps (continued) • When the interior portion has become overheated, for safety purposes, the projector is automatically shut down, and the indicator lamps may also be turned off. In such a case, discon...

[Page 76] Hitachi CP-X467

76 Troubleshooting Phenomena that may be easy to be mistaken for machine defects About the phenomenon confused with a machine defect, check and cope with it according to the following table. Phenomenon Cases not involving a machine defect Reference...

[Page 77] Hitachi CP-X467

77 Troubleshooting Phenomena that may be easy to be mistaken for machine defects (continued) Phenomenon Cases not involving a machine defect Reference page Sound does not come out. (continued) The AUDIO/SPEAKER setting is not correct. Correctly se...

[Page 78] Hitachi CP-X467

78 Troubleshooting • Although bright spots or dark spots may appear on the screen, this is a unique characteristic of liquid crystal displays, and it does not constitute or imply a machine defect. NOTE Phenomena that may be easy to be mistaken f...

[Page 79] Hitachi CP-X467

79 Specications Specications Specication Item Specication Product name Liquid crystal projector Liquid Crystal Panel Panel size 1.6cm (0.63 type) Drive system TFT active matrix Pixels 786,432 pixels (1024 horizontal x 768 vertical) Len...

[Page 80] Hitachi CP-X467

80 Specications Specications (continued) [unit: mm] 340 129 117 270 MENU AUDIO IN3 CONTROL AUDIO OUT COMPUTER IN1 COMPUTER IN2 MONITOR OUT HDMI AUDIO IN S-VIDEO USB DC 5V 0.5A USB STORAGE LAN BATTERY SD CARD ...