Prestige PE1M2LCD Operator's Manual

[Page 1] Prestige PE1M2LCD

128-9484 Page 1 Model PE1M2LCD Operators Manual RF Upgrade Kit Check with your installation center for features and functions operational on your system. To Operate System: 1) Press the lock button to lock the doors and arm the alarm if installed....

[Page 2] Prestige PE1M2LCD

128-9484 Page 2 Quick Stop Mode: With vehicle running, if you wish to make a quick stop and leave the vehicle running, once you arrive at your destination: a) place the gear selector in Park, b) set the parking brake, c) with your foot off the br...

[Page 3] Prestige PE1M2LCD

128-9484 Page 3 To program parking meter countdown timer, select tone or vibrate, alarm clock set on/off, Fahr- enheit or Celsius scale, or operate a second vehicle with similar Voxx Electronics remote start alarm system follow the chart below. T...

[Page 4] Prestige PE1M2LCD

128-9484 Page 4 Page 4 ADDITIONAL REMOTE FEATURES: The two way remote control unit allows you to access status information from the vehicle, check temperature, light the display, toggle the transmitter from beep tones to vibrate mode, initiate da...

[Page 5] Prestige PE1M2LCD

128-9484 Page 5 NOTE: To insure accurate 24 Hour Start up, it is advisable to reset the start time periodically as time may drift slightly each day. Timing Count Down The unit offers an additional count down timer for situations where an alert tone...

[Page 6] Prestige PE1M2LCD

128-9484 Page 6 Page 6 ALARM CLOCK This icon will be toggled on and off when the “F” + Trunk/Key buttons are pressed simul- taneously. The feature must be set in the feature selection menu of the transmitter. COUNT DOWN TIMER The unit offers...

[Page 7] Prestige PE1M2LCD

128-9484 Page 7 Page 7 1 2 Lock Button Press once to lock and arm alarm. Press and hold 3 seconds for panic alarm where applicable Trunk / Start Button Press two times in succession to start vehicle. Press and hold for 3 seconds for Trunk Releas...

[Page 8] Prestige PE1M2LCD

128-9484 Page 8 (Alarm & Keyless Systems Only) PROGRAMMING YOUR CUSTOM OVERRIDE CODE Unlike override switches easily found, and defeated, this security system allows the consumer to program a personal override code, offering a higher level of ...

[Page 9] Prestige PE1M2LCD

128-9484 Page 9 Page 9 (Alarm Systems Only) MANUALLY OVERRIDING YOUR SYSTEM: USING THE CUSTOM CODE OVERRIDE Assuming the override code programmed has not been changed, and the default override code of 11 is in the system’s memory. 1) Enter the ...

[Page 10] Prestige PE1M2LCD

128-9484 Page 10 Page 10 OPERATING ON AUTOMATIC START UP TIMER MODE Your system has the ability to automatically start the vehicle every 2 or 4 hours over a 48 hour period. This feature is especially useful in cold climates where the only means t...

[Page 11] Prestige PE1M2LCD

128-9484 Page 11 Page 11 From step 3 above: a) Press and release the valet/programming button 3 additional times to get to channel 4, then Press any unused transmitter button or button combination to program channel 4. b) From a, press and rele...

[Page 12] Prestige PE1M2LCD

128-9484 Page 12 © 2017 Voxx Electronics Corp., 180 Marcus Blvd., Hauppauge, NY 11788 128-9484 FCC COMPLIANCE This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cau...