Entel HT642 User Manual

[Page 1] Entel HT642

HT642 Entry User Guide – HT640 Series v08/08 Common Information (all models) HT644 LCD HT648 Entry GMDSS HT649 LCD GMDSS Professional submersible marine handheld transceivers ...

[Page 2] Entel HT642

Common Introduction This guide covers the ‘basics’ of your radio’s operation.To meet your exact requirements the radio may have been customised by your Entel authorised dealer. These features will be explained in a separate guide issued by the ...

[Page 3] Entel HT642

2 Common Certification Declaration of Conformity The HT64X series transceiver displays "CE" on the serial number label, indicating its compliance with the essential requirements of the EEC directive for Electromagnetic Compatibility. CE Com...

[Page 4] Entel HT642

3 Common Radio care Advice • Do not use options or accessories not specified by Entel • Ensure that the radio is used within the parameters for which it was designed • Please switch the transceiver off before connecting optional accessories War...

[Page 5] Entel HT642

4 Common Battery care / information • Do not reverse-charge or reverse-connect the battery • Do not touch a ruptured or leaking battery If liquids from the battery get into your eyes, immediately: Wash your eyes out with fresh water and avoiding ...

[Page 6] Entel HT642

Common Packing List Carry Options CFC750 HT7X2, HT7X3 & HT7X5 soft leatherette case finished in black with carry strap CLC752 HT7X2 heavy duty black leather case with strap & belt loop CLC753 HT7X3 & HT7X5 heavy duty black leather case wi...

[Page 7] Entel HT642

Common --- Attaching / Removing the Battery Pack 1 To attach, locate the pegs on the bottom of the battery into the slots on the radio and press the top of the battery against the radio. Secure battery by tightening the screw clockwise by hand. (Do n...

[Page 8] Entel HT642

7 Common Preparing Your Radio For Use cont... Attaching / Removing the Aerial 1 To attach, carefully align the aerial with the socket. Screw in the aerial clockwise (taking care not to cross the thread) until it is seated firmly against the top of th...

[Page 9] Entel HT642

8 Using Your HT642/HT648 On / Off button Press the on / off button to turn your radio on. A short turn on beep will be heard. To turn off, press and hold the on / off button until the display extinguishes. Transmitting on your radio Before transmitti...

[Page 10] Entel HT642

9 Common Scan (HT644/HT649) 1. Select the desired channel to be scanned using the & buttons. 2. Press the [MEM] button to store the channel into the transceiver’s memory. [MEM] is displayed on the LCD.This channel is now memorised to be scanned...

[Page 11] Entel HT642

HT642 Standard Features: • Environmentally protected to IP68 i.e. submersible to 5 metres for up to 60 minutes • Robust design, exceeds MIL-STD-810C/D/E/F • 1800mAH Lithium-Ion battery for superior operational time • 16 programmable channels ...

[Page 12] Entel HT642

11 Controls & Indicators HT642 On / Off button. Press to turn radio on, press and hold to turn off. Press up / down buttons to increase / reduce volume. Channel / Scan Control. Rotate to select the desired channel or scan setting. Push To Talk (P...

[Page 13] Entel HT642

HT644 Standard Features: • Environmentally protected to IP68 i.e. submersible to 5 metres for up to 60 minutes • Robust design, exceeds MIL-STD-810C/D/E/F • LCD screen to display channel number • 1800mAH Lithium-Ion battery for superior opera...

[Page 14] Entel HT642

13 HT644 Controls & Indicators Antenna H/L button 10 Push To Talk (PTT) button 9 Lamp / key lock button 8 On / Off button 7 Monitor button 1 Volume control 2 Speaker Microphone Scan button 3 Up / down buttons 4 MEM button 5 Ch. 16 button 6 Monito...

[Page 15] Entel HT642

14 LCD Indicators • High power selected (5 Watts) • Low power (1 Watt) • Transmit in progress • Receive in progress • Indicated channel is memorised for scanning • Scrambler mode enabled (version A & B only) • Voice operated mode en...

[Page 16] Entel HT642

15 PAGE INTENTIONALLY LEFT BLANK ...

[Page 17] Entel HT642

16 HT648 HT648 Standard Features: • Environmentally protected to IP68 i.e. submersible to 5 metres for up to 60 minutes • Robust design, exceeds MIL-STD-810C/D/E/F • GMDSS (Conforms to Pan European Specification ETS300-225 for the use of radios...

[Page 18] Entel HT642

17 Controls & Indicators On / Off button. Press to turn radio on, press and hold to turn off. Press up / down buttons to increase / reduce volume. Channel change control, rotate to select the desired channel or scan setting. Push to talk button, ...

[Page 19] Entel HT642

HT649 HT649 18 Standard Features: • Environmentally protected to IP68 i.e. submersible to 5 metres for up to 60 minutes • Robust design, exceeds MIL-STD-810C/D/E/F • GMDSS (Conforms to Pan European Specification ETS300-225 for the use of radios...

[Page 20] Entel HT642

19 Controls & Indicators HT649 Antenna Dealer programmable button * Push To Talk (PTT) switch 7 Dealer programmable button * On / Off 1 Dealer programmable button * Volume control LED indicator 8 Speaker Microphone Scan button 3 Channel change 4 ...

[Page 21] Entel HT642

HT649 LCD Indicators 20 • Key Bleeps Off • Keypad Locked • Blue-Com device connected • Accessory Connected • GPS Connected • VOX Enabled • Battery State • Receive strength / TX Output • Speaker muted • Speaker unmuted • Channel ...

[Page 22] Entel HT642

NOTES 21 ...

[Page 23] Entel HT642

NOTES 22 ...

[Page 24] Entel HT642

‘the choice’ professional’s Headquarters: United Kingdom www.entel.co.uk Copyright Entel UK Ltd. 2008 <Intended Country Of Use> BE BG CZ DK DE EE IE EL ES FR IT CY LV LT LU HU MT NL AT PL PT RO SI SK FI SE UK Registered Community Design A...