KTI Networks KB-100L User Manual

[Page 1] KTI Networks KB-100L

High Speed Internet BroadBand Router User Guide ...

[Page 2] KTI Networks KB-100L

FCC Warning This equipment has been tested and found to comply with the regulations for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference wh...

[Page 3] KTI Networks KB-100L

17 TABLE OF CONTENT About This Guide.....................................................................................18 Purpose................................................................................................18 Overview of th...

[Page 4] KTI Networks KB-100L

ABOUT THIS GUIDE Congratulations on your purchase of this 4-port Broadband Router. This device integrates 100Mbps Fast Ethernet and 10Mbps Ethernet network capabilities in a highly flexible desktop package. It provides a complete solution for...

[Page 5] KTI Networks KB-100L

Introduction With the explosive growth of the Internet, accessing information and services at any time, day or night has become a standard requirement for most people. The era of the standalone PC is waning. Networking technology is moving o...

[Page 6] KTI Networks KB-100L

Applications: Broadband Internet access: Several computers can share one high-speed broadband connection (LAN and WAN-Internet). Resource sharing: Share resources such as printers, scanners and other peripherals. File sharing: Exchang...

[Page 7] KTI Networks KB-100L

Unpacking and Setup This chapter provides unpacking and setup information for the Broadband Router. Unpacking Open the box of the Broadband Router and carefully unpack it. The box should contain the following items: u One 4-port High Spee...

[Page 8] KTI Networks KB-100L

Hardware Installation Front Panel The figure below shows the front panel of the Broadband Router. 4-Port 10/100Mbps Ethernet Broadband Router Front Panel POWER This indicator lights green when the hub is receives power, otherwise, it is off...

[Page 9] KTI Networks KB-100L

4 Port 10/100Mbps Ethernet Broadband Router Rear Panel WAN In the four port broadband router, there is an RJ-45 10/100Mbps Auto- MDIX port for the WAN that will fit the xDSL/Cable modem’s specification need. LAN (1-4) Four RJ-45 10/100Mb...

[Page 10] KTI Networks KB-100L

3. Use another network cable to connect to the Ethernet card on the computer system, the other end of the cable connects to the LAN port of the Internet Broadband Router. Since the Internet Broadband Router has four ports, you can connect up ...

[Page 11] KTI Networks KB-100L

PC Network TCP/IP Setting The network TCP/IP settings differ based on the computer’s operating system (Win95/98/ME/NT/2000/XP) and are as follows. Windows 95/98/ME 1. Click on the “Network neighborhood” icon found on the desktop. 2. C...

[Page 12] KTI Networks KB-100L

6. 7. Select “None” for the “Gateway address” field. Windows 2000 Double click on the “My computer” icon on the desktop. When “My computer” window opens, open the “Control panel” and then open the “Network dialup c...

[Page 13] KTI Networks KB-100L

network connection” icon. Select “Properties” to enter the TCP/IP setting window. 1. In the “Local area network status” window, click on “Properties.” 2. In the “Local area network connection” window, first select TCP/IP set...

[Page 14] KTI Networks KB-100L

Windows NT4.0 Click on the “Start” button located on the lower left corner of the menu bar. Select “Settings” and then “Control panel.” In the “Control panel” window, select “Network” to enter the TCP/IP setting window. ...

[Page 15] KTI Networks KB-100L

Windows XP Point the cursor and click the right button on the “My Network Place” icon. Select “properties” to enter the TCP/IP setting window. 1. Set “IP address” to “Obtain an IP address automatically.” 2. Set “DNS” to...

[Page 16] KTI Networks KB-100L

INTERNET BROADBAND ROUTER CONFIGURATION First make sure that the network connections are functioning normally. This Internet Broadband Router can be configured using Internet Explorer 4.0 or newer web browser versions. Login to the Internet Br...

[Page 17] KTI Networks KB-100L

4. After entering the password, the main web page comes up, there are two choices for setting, Quick Setup or Advanced Setup, it is recommended that the beginner to use the Quick Setup, it will lead you step by step to configure the Broadband...

[Page 18] KTI Networks KB-100L

1-2-1 Cable modem (DHCP) To connect a cable modem with the Broadband Router, check the cable modem with the related user’s guide, then the Cable modem will automatically configure itself, the Broadband Router is configured to automatical...

[Page 19] KTI Networks KB-100L

1-2-3 PPPoE (Dial-up xDSL) If connected to the Internet using a PPPoE (Dial-up xDSL) Modem, the ISP will provide a Password and User Name, then the ISP uses PPPoE. Choose this option and enter the required information, if the ISP provided a ...

[Page 20] KTI Networks KB-100L

IP Address, Your IP Address, Your Subnet Mask required by your ISP in the appropriate fields. If your ISP has provided you with a Connection ID, enter it in the Connection ID field, otherwise, leave it zero. The MTU feature specifies the largest...

[Page 21] KTI Networks KB-100L

Advance Setup The Broadband Router supports advanced functions like System setting WAN setting, LAN setting, NAT Setting and Firewall setting. 2-1 System This page includes all the basic configuration tools for the Broadband Router. ...

[Page 22] KTI Networks KB-100L

2-1-1 System Time Connecting to a Simple Network Time Protocol (SNTP) server allows the Broadband Router to synchronize the system clock to the global Internet through the SNTP Server. The synchronized clock in the Broadband Router is used t...

[Page 23] KTI Networks KB-100L

2-1-3 Firmware Upgrade By upgrading a new firmware for the Broadband Router to improve functionality and performance. Enter the path and name of the upgrade file then click the APPLY button below. You will be prompted to confirm the upgrade. ...

[Page 24] KTI Networks KB-100L

To restore the factory default settings of the Broadband Router, click on the “Restore” button. l Backup Settings Press the “Backup Settings” button to save the current setting in a filed “config.bin” or given filename. l Restore...

[Page 25] KTI Networks KB-100L

2-1-6 System Log View any attempts that have been made to gain access to the network. 2-1-7 Reset In the event that the Broadband Router stops responding correctly or in some way stops functioning, perform the reset function. The settings wi...

[Page 26] KTI Networks KB-100L

2-2-2 Static IP If the Service Provider has assigned a fixed IP address, enter the assigned IP address subnet mask and gateway address provided. Click “yes” if using two or more IP addresses. 2-2-3 Dial-up xDSL (PPPoE) If connected...

[Page 27] KTI Networks KB-100L

The Maximum Idle Time feature can control the connection time while user’s need to save the cost of connection fee from ISP provider (default time=0, always connect). Click on the Connect-on-demand button to dial up to the ISP when only on dem...

[Page 28] KTI Networks KB-100L

2-2-5 DNS The Domain Name System (DNS) is the way that Internet domain names are located and translated into Internet Protocol (IP) addresses. If your ISP provided at least one DNS Server IP Address, type that IP Address in the Primary DNS add...

[Page 29] KTI Networks KB-100L

2-4 NAT Network Address Translation (NAT) allows multiple users at the local site to access the Internet through a single public IP address. NAT can also prevent hacker attacks by mapping local addresses to public addresses for key services s...

[Page 30] KTI Networks KB-100L

the other end. Specifically, UDP doesn't provide sequencing of the packets that the data arrives in. This means that the application program that uses UDP must be able to make sure that the entire message has arrived and is in the right or...

[Page 31] KTI Networks KB-100L

2-4-2 Virtual Server Configure the Broadband Router as a virtual server to allow the Router to watch outgoing data for specific port numbers. The IP address of the computer that sends the matching data is remembered by the Router, so that wh...

[Page 32] KTI Networks KB-100L

2-5 Firewall The Broadband Router provides extensive firewall protection by restricting connection parameters to limit the risk of hacker attack, and defending against a wide array of common hacker attacks. The Broadband Router provides packet ...

[Page 33] KTI Networks KB-100L

2-5-4 DMZ (Demilitarized Zone) If a local client PC cannot run an Internet application properly from behind the NAT firewall, open the client up to unrestricted two-way Internet access by defining a virtual DMZ Host. ...

[Page 34] KTI Networks KB-100L

TECHNICAL SPECIFICATIONS General Standards IEEE 802.3 10BASE-T Ethernet IEEE 802.3u 100BASE-TX Fast Ethernet ANSI/IEEE 802.3 Auto-negotiation Protocol CSMA/CD Data Transfer Rate Ethernet: 10Mbps (half duplex), 20Mbps (full-duplex) Fast E...