Kenwood HCG600 Instructions For Use Manual

Download or browse on-line these User Manual Manual for Kenwood HCG600 Built-in hob, Hob.

Kenwood HCG600 Manual Information:

This manual for Kenwood HCG600, given in the PDF format, is available for free online viewing and download without logging on. The guide contains 28 pages, and the size of the file at download is . The document type is User Manual Manual.

Download Manual

Summary of Contents:

[Page 1] Kenwood HCG600

Before operating this hob, please read these instructions carefully GB BUILT-IN COOKING HOB model HCG600 Instructions for use - Installation advice ...

[Page 2] Kenwood HCG600

2 CONTENTS Page Number Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Before Using For The First Time . . . . . . . . . . . . . . . . . . . . . . 4 Important Safeguards & Recommendations . . . . . . . ...

[Page 3] Kenwood HCG600

3 Dear Customer, Thank you for purchasing a Kenwood HCG600 Gas Hob. The safety precautions and recommendations in these instructions are for your own safety and that of others. They will also provide a means by which to make full use of the features ...

[Page 4] Kenwood HCG600

4 BEFORE USING FOR THE FIRST TIME ■ Read the instructions carefully before installing and using the appliance. ■ After unpacking the appliance, make sure it is not damaged. In case of doubt, do not use the appliance and contact your supplier or a...

[Page 5] Kenwood HCG600

5 1 - FEATURES Fig. 1.1 7 6 5 4    This appliance is class 3 COOKING POINTS 1. Auxiliary burner (A) - 1,00 kW 2. Semirapid burner (SR) - 1,75 kW 3. Triple-ring burner (TC) - 3,50 kW CONTROL PANEL DESCRIPTION 4. Front right auxiliary burn...

[Page 6] Kenwood HCG600

6 1 - HOW TO USE THE COOKER HOB GAS BURNERS Gas flow to the burners is adjusted by turning the knobs (illustrated in fig. 2.1) which control the valves. Turn the knob so that the indicator line points to the relevant symbol for the fol- lowing functi...

[Page 7] Kenwood HCG600

7 CHOICE OF THE BURNER The symbols printed on the panel next to the gas knobs indicates which knob cor- responds with which burner. Select the burner that is most suitable for the diameter and the capacity of the pan to be used. As an indication, the...

[Page 8] Kenwood HCG600

8 WOK STAND (figs. 2.4a, 2.4b) This wok stand should be placed over the pan-rest for the triple ring burner. Warning: ✓ Using a wok without the stand may cause the burner to operate incorrectly. ✓ Do not use the stand for ordinary, flat-bottomed ...

[Page 9] Kenwood HCG600

9 3 - CLEANING AND MAINTENANCE GENERAL ADVICE ✓ Before you begin cleaning you must ensure that the hob is switched off. ✓ Allow the appliance to cool down before cleaning. ✓ Avoid leaving acidic substances (lemon juice, vinegar etc.) on the sur...

[Page 10] Kenwood HCG600

10 BURNERS AND GRIDS ✓ These parts can be removed and cleaned with appropriate products. ✓ After cleaning, check that the burners and their flame spreaders are dry before replac- ing correctly. ✓ It is very important to check that the burner fl...

[Page 11] Kenwood HCG600

11 CORRECT REPLACEMENT OF THE BURNERS It is very important to check that the burner flame spreader “F” and the cap “C” have been correctly positioned (see figs. 3.1 and 3.2 ). Failure to do so can cause serious problems. In appliances with el...

[Page 12] Kenwood HCG600

12 CORRECT POSITION OF TRIPLE RING BURNER The triple ring burner must be correctly positioned (see fig. 3.3); the burner rib must be fitted in their housing as shown by the arrow. The burner correctly positioned must not rotate (fig. 3.4). Then posit...

[Page 13] Kenwood HCG600

13 IMPORTANT ✓ The appliance should be installed, regulated and adapted to function with other types of gas by a QUALIFIED INSTALLATION TECHNICIAN. Failure to comply with this condition will render the guarantee invalid. ✓ The appliance must be i...

[Page 14] Kenwood HCG600

14 4 - INSTALLATION Fig. 4.1 Fig. 4.2 580 480 500 0 –2 560 0 –2 200 min 60 min 650 mm650 mm ✓ if the hob is installed over a built-in oven, there must be a distance of at least 30 mm between the two appli- ances. The two appliances shou...

[Page 15] Kenwood HCG600

15 INSTALLATION IN KITCHEN CABINET WITH DOOR (fig. 4.3) It is recommended that a 30 mm clear- ance be left between the cooker top and the fixture surface (fig. 4.3). 30 mm Fig. 4.3 Space for connections Clearance Door 20 mm min. 40 mm max. FASTE...

[Page 16] Kenwood HCG600

16 CHOOSING SUITABLE SURROUNDINGS The room where the gas appliance is to be installed must have a natural flow of air so that the gas can burn (in compliance with the current laws in force). The flow of air must come directly from one or more openin...

[Page 17] Kenwood HCG600

17 Fig. 5.2 GAS CONNECTION Connection to the gas main must be per- formed by a qualified technician, in com- pliance with the current laws in force. The cooktop is set up and calibrated to work with the gas indicated on the rating plate affixed to th...

[Page 18] Kenwood HCG600

18 IMPORTANT: ✓ Never turn union C using force without first slackening nut A. ✓ Gasket F (Fig. 5.1) guarantees the seal of the gas connection. Replace it whenever it is even slightly deformed or imperfect. ✓ If using flexible metal pipes, mak...

[Page 19] Kenwood HCG600

19 ADAPTING THE APPLIANCE TO FUNC- TION WITH DIFFERENT TYPES OF GAS If a different gas from that one indicated on the label is used, adapt the cooktop to this new function. Injectors for LPG gas can be obtained from the After-Sales Service. Select th...

[Page 20] Kenwood HCG600

20 REGULATING THE BURNER MINIMUM SETTING When changing from one type of gas to another, the minimum tap output must also be correct, considering that in this position the flame must be about 4 mm long and must remain lit even when the knob is turned...

[Page 21] Kenwood HCG600

21 G30/G31 G 20 BURNERS 28-30/37 mbar 20 mbar Auxiliary (A) 1,00 0,30 50 72 (X) Semirapid (SR) 1,75 0,45 65 97 (Z) Triple-ring (TC) 3,50 1,50 95 135 (T) Nominal power [kW] Reduced power [kW] Ø injector [1/100 mm] Ø injector [1/100 mm] AIR VENT NE...

[Page 22] Kenwood HCG600

22 6 - ELECTRICAL SECTION Fig. 6.1 IMPORTANT: Installation must be carried out according to the manufacturer's instructions. Incorrect installation may cause harm and damage to people, ani- mals or property, for which the manufacturer accepts no...

[Page 23] Kenwood HCG600

23 ✓ CONNECTION BY A THREE PIN SOCKET (Fig. 6.1) ➜ The appliance must be connected to a 220-240 volts 50 cycle AC supply by means of a three pin socket, suitably earthed and should be protected by a 3 amp fuse (gas models). ➜ If the mains plu...

[Page 24] Kenwood HCG600

24 ✓ The power supply cord must not touch against any hot surfaces and must be placed so that its temperature does not exceed 75°C at any point along its length. ✓ After having installed the appliance, the power switch or power plug must always ...

[Page 25] Kenwood HCG600

25 FEEDER SPECIAL CABLE SECTION - Type “HO5V2V2-F” resistance to temperatures of 90°C 230 VAC 50 Hz 3 x 0,75 mm 2 ✓ The supply cable must be replaced with a cable of the same type. ✓ The electrical cable must be connected to the terminal bo...

[Page 26] Kenwood HCG600

26 UK only If your appliance goes wrong within one year from the date you bought it, we will repair it (or replace it if necessary) free of charge provided: • you have not misused, neglected, or damaged it; • it has not been modified; • it ...

[Page 27] Kenwood HCG600

27 Descriptions and illustrations in this booklet are given as simply indicative. The manufacturer reserves the right, considering the characteristics of the models described here, at any time and without notice, to make eventual necessary modificat...

[Page 28] Kenwood HCG600

code 1102422 ß3 Part Number 56322/1 ...