Mastech MY-60 Operator's Manual

[Page 1] Mastech MY-60

⊙ MY-60 ⊙ MY-60T ⊙ MY-61 ⊙ MY-62 ⊙ MY-63 ⊙ MY-64 ○ ○ DIGITAL MULTIMETER OPERATOR’S MANUAL ...

[Page 2] Mastech MY-60

1. INTRODUCTION This MY-60 Series Digital Multimeter is a compact precision, battery operated, LCD display 3-½ digits Digital Instrument. Superiority: 9 High accuracy 9 Large LCD display 9 Digital height 25mm 9 Single 32 position rot...

[Page 3] Mastech MY-60

MY-60 MY-60T MY-61 MY-62 MY-63 MY-64 200mV 2V 20V 200V 1000V 0.8%±2 Accuracy Range 0.5%±1 0.5%±2 Input impedance: 10MΩ on all range 2) ACV MY-60 MY-60T MY-61 MY-62 MY-63 MY-64 200mV 2V 20V 200V 700V Range 0.8%±3 0.8%±3 1.2%±3 Accuracy ...

[Page 4] Mastech MY-60

MY-60 MY-60T MY-61 MY-62 MY-63 MY-64 200 Ω 2K Ω 20K Ω 200K Ω 2M Ω 20M Ω 200M Ω 1.0%±5 5.0%±20 Range Accuracy 1.0%±10 1.0%±3 7) TEMPERATURE (MY-60T/MY-62/MY-64 only) MY-60T MY-62 MY-64 -20 ℃ ~ 400 ℃ 400 ℃ ~ 1000 ℃ Ran...

[Page 5] Mastech MY-60

measurement ranges. 6) Either one of the test leads should be taken off from the circuit under test when changing the test ranges. 7) To avoid electrical shock or damage to the meter; Do not apply more then 500V between any terminal and earth...

[Page 6] Mastech MY-60

polarity at the red test lead connection will be indicated at the same time as the current. Note: a) If the current range is unknown beforehand, set the function range switch to the highest range and work down. b) When only the figure “1�...

[Page 7] Mastech MY-60

read the display value. Note: The tested capacitor should be discharged before the testing procedure. Never apply voltage to the “Cx” input socket, or serious damage may result. 5.5 FREQUENCY MEASUREMENT 1) Set the function range switch...

[Page 8] Mastech MY-60

voltage approx. 2.8V. c) The meter displays the forward voltage drop and displays figure “1” for overload when the diode is reversed. 5.8 TRANSISTOR hFE TEST 1) Set the function range switch to the “hFE” position. 2) Make sure the...

[Page 9] Mastech MY-60

OPERATOR’S MANUAL CAUTION: * Before attempting to insert transistors capacitor thermocouple for testing, always be sure that test lest leads have been disconnected from any measurement circuits. * Components should not be connected to the hF...

[Page 10] Mastech MY-60

1. SAFETY INFORMATIONS This multimeter has been designed according to IEC-1010 concerning electronic measuring instruments with an overvoltage category (CATⅡ) and pollution 2. Follow all safety and operating instructions to ensure that meter is...

[Page 11] Mastech MY-60

1.4 MAINTENANCE * Before opening the meter, always disconnect test leads from all sources of electric current. * For continue protection against fire, replace fuse only with the specified and current rating: F200mA / 250V (quick acting) *If an...

[Page 12] Mastech MY-60

2.1 2.2 2.3 FUNCTION AND RANGE SELECTOR There are different functions and 32 ranges provided. A rotary switch is used to select functions as well as ranges. POWER SWITCH A push-push switch is used to turn the meter on or off. To e...

[Page 13] Mastech MY-60

The polarity of the red lead connection will be indicated along with the current value when making DC current measurement. 3. When only the figure”1” displayed, it indicates overrange situation and the higher range has to be selected. 3.3...

[Page 14] Mastech MY-60

3.6 TESTING DIODE 1. Connect the black test lead to COM jack and the red test lead to the VΩHz jack (The polarity of red lead is〝+〞) 2. Set the rotary switch at position and connect red lead to the anode, black lead to the cathode of th...

[Page 15] Mastech MY-60

LOW BATTERY INDICATION SIZE (HxWxL) WEIGHT “ ”appears on the display 31.5mm×91mm×189mm 310g(including battery) 4.2 DC VOLTAGE Range Resolution Accuracy 200mV 2V 20V 200V 1000V 0.1mv 1mV 10mV 0.1V 1V ±0.5% of rdg ± 1 digi...

[Page 16] Mastech MY-60

4.6 RESISTANCE Range Resolution Accuracy 200Ω 2KΩ 20KΩ 200KΩ 2MΩ 20MΩ 200MΩ 0.1Ω 1Ω 10Ω 100Ω 1KΩ 10KΩ 100KΩ ±0.8% of rdg ± 3 digits ±0.8% of rdg ± 1 digit ±0.8% of rdg ± 1 digit ±0.8% of rdg ± 1 digit �...

[Page 17] Mastech MY-60

5.3 How to use the holster The holster is used to protect the meter and to make the measurement more comfortable. It comes with two stands installed together. The figure shows how to use the holster to: a. b. c. d. Support the me...